In the modern world it is already impossible to imagine life without smartphones. They can replace as much vital things: to be a clock and alarm clock, record an important conversation with a voice recorder, replace the good old player, a camera, etc. Even watching a movie on such a device Now the case is usual if the phone has disappeared in the immense spaces of women's bags And men's pockets, now the place of the smartphone on the desktop. For more convenient use of this device, it's good when you can make a stand for a smartphone with your own hands.
Everything that might need to create your own stand can be found at home. It is very convenient, because sometimes there will be a desire to make something to make it, and go to the store and specially prepared for such a desire event. Below will be described several instructions for the manufacture of such a comfortable thing as the stand for your smartphone. One idea is suitable for making even in the office, and the second is more domesticated.
In the course there is a office
Representatives of office professions are very well known that the stationery in the workplace is even debugged. Moreover, you can find everything from pencils and pens, ending with the stationery clamps. That came to mind the idea that is easy to implement and which will definitely be useful. Why not make a stand from stationery clamps? They look like this, and if someone did not notice them before, now everyone will definitely pay attention:
There are colored, small, big, which is only possible to imagine, so do not have to complain about the monotonous black stand, choosing colored clamps, you will unconsciously increase yourself mood, looking at bright and warm colors:
For first variations, only two large clamps will be needed.
Pay attention to the size of your smartphone, you may need a smaller or larger clips.
It should be copped together using a piece of paper or cardboard, or any other flat things, and the stand is ready!
Article on the topic: How to make Furniture for doll furniture?
If you want to watch something on the smartphone, and it is necessary to charge it at the same time, you will need four of the same clamps, they are bonded between themselves, as shown in the figure, and the charger is placed in the middle, so the smartphone is kept firmly, and is in a convenient position For charging.
From the clips, you can invent more various embodiments of their bonding among themselves to create supports and holders, it remains only to count on your imagination. It is quite convenient that all these structures are quickly disassembled when it is getting tired or its elements will be needed, then in a matter of seconds it will seem that there is no support.
Paper technician
If the stand can be made from the stationery clips, then you can also try from paper. To do this, you will need:
- dense sheet of paper;
- line (minimum 20 cm);
- scissors;
- a pen;
- At the request of paint any and varnish (water base).
The creation of an interesting stand for the smartphone will take no more than 20 minutes, the origami technique will be used for its manufacture. As a result, it will be such an unusual thing.
The first step will be a markup on a sheet with a pencil or handle - which is at hand, the shape of a square 20 * 20 cm. This is the size of the stand under standard smartphones. Next, cut out along the contour and get:
You can use both a conventional tight sheet of paper and the cover from the notebook, notepad, color cardboard, etc. The format is suitable A4.
Next, the sheet first folds horizontally in half, then vertically. Folds should be well adding so that in the future you can use them. Having finished with this, we deploy a sheet with clearly pronounced outlines of horizontal and vertical lines.
For convenience, we note where we have left side, and where is the right. We take the left edge and wrap up, until it is stripped in the middle of the sheet.
Article on the topic: The basis for bracelets do it yourself from plastic
The same is done with the right edge. As a result, we get a sheet that looks like this:
The next step will be the creation of triangles from what we have at the moment. To do this, one of the corners, the right upper or right bottom, the values have no value with what start, you need to wrap it with the middle, the diagonal line will turn out. It is useful to us a ruler, as the paper in several layers becomes already sufficiently dense, it is convenient to block the lineup and align the fold line.
As a result, the paper will acquire the following form:
We do everything in the same order with the left. The top of the left side bends to the center, then the bottom of the left side. After all the bends are put in order, we get:
New formed angles bending inside - diagonal:
Now the principle of harmonica, the whole design must be clamped, we begin to do it on the right side:
Now we take up the left corner, according to the same principle to lay the angles diagonally inward.
It turns out a kind of boat:
We take this boat and turn over, put on the table:
Next, we strongly click on the middle of the structure and thanks to pre-prepared trajectories, it bends:
So it turns out the finished stand for the smartphone that you have done with your own hands.
With it, you can not only just store the phone so that it is in sight and in a safe place, but also watch the video by setting it to the following position:
Continuing the experiment, then you can paint the stand in any color or even decorate the pattern. If you use watercolor paint, it is best to paint in several layers and sufficiently succeed. On top of this, it is best for durability to cover it with water-based varnish.
Video on the topic
In order to better understand the process of making supports, check out the following video:
Article on the topic: Winter hat for a girl with knitting needles: Schemes with a description of the knitting of the autumn accessory and hat-helmets