You have too many little things, and you do not know where to fold them? An alternative solution to this problem may be a plastic bottle box. To create it, you will not need too much time, money and patience. And the result will exceed all the expectations!
Just and available
The process of making a casket can be traced on the example of the next master class with a photo.
To work, you will need: plastic bottle, tight cardboard, thread, needle, tissue of two colors, beads, openwork ribbon.
Take a bottle with a volume of 2.5 liters and cut off the bottom in a height of about nine cm. The sharp edge of the sewer make small holes around the perimeter, as shown in the photo.
Next, we need a dense cardboard, or glue 2 sheets, if it is very thin. We draw on the cardboard two circles with a diameter of 11.5 cm and 8.5 cm, and cut them out.
Take the fabric of the primary color, in our case black, and cut the circle, diameter twenty cm.
Then cut the circle from the black fabric, the radius of which is 13 cm.
Take the blank carved from the bottle and put a small circle from the cardboard onto it. It is best to use glue gun.
Give a little dry.
Now we take a large black circle, diameter 26 cm, and along the edge stretch the thread with a needle, as represented in the photo.
Inside this circle you need to insert a plastic bottle and tighten the threads. The fabric must lie tightly to the plastic.
Then evenly distribute the folds and begin to sew. Especially for this, holes on a plastic bottle were made.
The edges of the fabric must be accepted and flash again.
That's what we got:
Now you need to work with the lid of the box. To do this, take the remaining cardboard circle and you need to put in the center of the tissue circle. On the edge of the fabric we flash threads.
Article on the topic: how to make jeans
Repeat the threads again.
Next, take the lining of the contrasting color, for example, red. Cut the strip for lining.
The exact dimensions do not give, but know that the length should be equal to the length of the circumference at the bottle, the height is greater than 1 cm than the height of the box, and the diameter of the circle is about 9-10 cm.
We put the lining inside the casket and fix the first time.
Very gently need to sew lining. From the outside you can use openwork lace.
Susting lace is also possible at the bottom of the bottle.
Reduce all the beads, it looks much feminine.
Take a small circle of lace and secure it on the lid.
Now, from the fabric of the primary color, you need to cut a small circle that will close the cardboard.
Send lace, hide the edge of the circle.
Beads can also be reeded.
Now you can make a flower. To do this, cut out five large and as many small petals.
And collect a flower.
Here is such a beautiful box came out. A little even reminds Ukrainian symbolism.
Video on the topic
We also offer to see a selection of video, where the process of creating other beads made of plastic bottles will be shown.