The desire to organine the original interior, the lack of space in a small hallway, the arrangement of the cottage is the reasons for which people think about how to make a stand for shoes with their own hands. Many possible options to make it, a large selection of materials, a different level of difficulty work is the advantages of this idea. In the article, consider a few stands made by your own hands.
The most familiar material
Very common and purchased, and homemade shoes from the tree. They are obtained by beautiful, durable, creating comfort, fit into almost any interior. From the minuses you can only be called the complexity of the work, because you will need a special tool and certain skills. But even here you can choose the simplest options. Consider a few wood shelves and materials close to it.
- From wooden plates.
This option is one of the most difficult because it requires special equipment. Master class on the manufacture of the shelf-Pouf look at the video:
- Support from LDSP.
Materials and tools:
- LDSP 48 × 63x29 cm - 4 pcs.;
- plywood 60 × 120 cm;
- plywood shelves;
- 5 wheels;
- screws;
- bolts;
- nuts;
- washers;
- adhesive for wood;
- paint.
From the sheets of LDSP to collect the frame and grind the screws. Behind to nail Fan. From plywood for shelves to cut strips by the number of future shelves. They can immediately paint. Make cuts saw, as in the photo:
Collect the shelves, smearing the joints by glue:
Lubricate the side and rear sides of the plywood shelves in places where they will be attached to the box of LDSP. Insert the shelves into the workpiece from the LDSP, put the load from above, give glue to dry.
With the help of bolts, attach to the bottom of the wheels (they can be replaced with legs) if you think that they are needed.
Article on the topic: Picture of sequins with your own hands: Light schemes for children and adults
Stand is ready. You can do not alone, but several such modules, and copold them.
You can also make a stand not from LDSP, but from chipboard. Assembly options:
- From plywood.
From this material you can make very interesting things. For example, the modular shelf will become an excellent entrance to the hallway. It is attached to the wall, and its design can be changed depending on their tastes.
Materials and tools:
- plywood;
- drill;
- Lobzik;
- Perforator;
- pins;
- glue.
Phaneur cut into identical rectangles. Carefully poll. Collect design, as in the photo, or depending on your sketch:
Attach pin with pins.
- From the rails.
Jubberry from this material is the perfect option for giving. The tools will need a screwdriver, hammer, nails. Designs can be different.
The simplest thing is to connect two racks, above the smaller, more from the bottom, the shoes are inserted between them socks.
Transverse crossbars are mounted on vertical rails. The shelf is attached to the rails to the wall.
Traditional shelf, but from the rails. From above, you can make a soft layer and except the stand will also be the emblem.
The strongest material
It will be about the metal stands. For this material, welding may be required, and you can do without it. For example, by purchasing beautiful metal blanks in the store, most likely they will need to fasten with welding. And if you use the old stepladder disassembled into separate details, it will be enough to think through their mounting to the wall.
Possible options for such supports in the photo:
Paper in the case
Cardboard is used as a material for such supports. Pros: easily accessible, cheap, light, easy to make items from it. Cons: short-lived, easy to break the design of it.
For work, scissors are often needed, a stationery knife, pencil, line, tape, glue, stapler.
The easiest way to make a stand from cardboard for shoes is to use boxes from under it. To do this, make up the top and base from one box, and from other cut shelves and partitions. Also here are boxes from champagne and wine. The design is obtained quite small and suitable for storage of the sample, slap, slippers.
Article on the topic: Sphinx clothes do it yourself: Schemes with photos and video
Another option is pockets from cardboard boxes. This design is attached to the wall and is suitable only for easy shoes, such as slippers. External registration is optional.
Oh, this plastic
Today it is fashionable to create unusual elements in the interior. Stand for shoes in the form of a linen from PVC pipes fully corresponds to this wish. Yes, and it is not so difficult.
For its manufacture in a construction store to buy PVC pipes with a large diameter. The Tamember can be asked from cutting into pieces about 30 cm long. The edges are well cleaned.
You can decorate anyhow - paint, damage with wallpaper, sow cloth. Finished elements glue with each other 3-4 pieces and give glue to dry. Next, glue pipes into a height of several rows. Jobs ready!
Video on the topic
Video on the manufacture of stands for shoes with your own hands: