Many owners of apartments in high-rise buildings often suffer from the inconvenience of planning. Therefore, many welcome the idea of uniting residential room with a loggia or balcony. This option for solving the increase in space allows you to create a unique design in the apartment.
But it is impossible to just carry the wall. It is necessary correctly, and the main thing is to legitimately alterars. Since the base of the balcony is a stove pinched between overlaps, it is necessary to properly distribute the load of furniture and other elements.
Methods of accession
Can be limited to only the removal of the balcony design
There are several options for combining the room with a balcony or loggia.
- Deleting only window design. The wall partition remains in place. In this case, it is necessary to produce glazing and insulation of the balcony.
- Full dismantling of the wall. In this way, the room is obtained with a larger area. In this case, not only glazing and insulation is required, but also the transfer of the heating radiator.
In the case of using the second option, it is necessary to coordinate the redevelopment plan in the relevant services.
This process is quite long, so you should bother in advance about it. Even if it is planned to simply transfer the heating radiator and do not touch the wall, then the documents must be argued.
Preliminary work
Before proceeding with the compound process, it is necessary to consider and do some preparatory work:
- Strengthening the fence. Specialists advise the reliable framework from metal structures;
- Perform exterior cladding siding. It will help protect the balcony or loggia from temperature drops and maintain heat in the room;
- The balcony is pre-glazed and insulated.
To ensure good thermal insulation, metal-plastic windows with double-chamber windows are used. Wind pressure on glazing can be reduced to the arrangement of one opened window in the middle of the structure.
Warming is carried out all surfaces, except for the wall of the partition between the room and the balcony space. To ensure long-term operation, it is necessary to provide hydro and vaporizolation. If there is no permission to transfer the heating battery, then it is necessary to think about the arrangement of warm floors.
Article on the topic: Device fence from a tree on a balcony and a terrace
Connection by dismantling window opening
The remaining carriage of the wall should be strengthened
You can partially connect the balcony and room. In this case, it will be removed only by the window throughout. The wall-partition between the room and the balcony is carrier, so it is impractical to break it without additional strengthening.
It is easy to remove the window block, carrying out these works does not require large labor. From the tools we use the hammer and hacksaw.
First you should remove the glass and dismantle the sash. The window frame is collected in several places with a hacksaw and disassemble in parts.
Full disassembly wall
After a complete dismantling, the opening requires additional strengthening.
When communicating with dismantling the wall on the balcony, additional gain should be carried out. Removing the bearing wall between the room and the balcony and without making any fortifications, you can create an emergency.
There will be more serious tools such as Bulgarian and a perforator. They will make it easier to remove concrete partitions.
Performing compounds in this way, there is a need to transfer the heating battery. Therefore, for a start, dismantle the old product and cut off the pipe.
When recording a new battery, it should be remembered that in proportion to the increase in the square of the room should additionally put the appropriate number of sections in the radiator.
Threshold
The wall-partition has some elevation over the floor of the room - the threshold. But making the demolition of the septum, it is implied to the arrangement of the floor of the same level. In such a situation, problems may arise. You can not always dismantle the threshold for some reason:
- In brick homes, this element is part of the carrier structure that fixes the balcony plate.
- In the panel high-rise buildings, its absence will lead to the latter joint. This is fraught with a freezing and rigidity.
Therefore, this detail of the wall will have to beat so that it fit into the overall interior. For example, arrange steps.
Some tenants achieve a single-level floor by raising it to the level of the threshold.
Pros and Cons Connections
Removing the bottomroom block, you expand free space in the room
Article on the topic: Basic principles of combining wallpapers in the hall
Should I demolish the wall partition between the balcony and the room. Let's try to figure it out, weighing everything for and against. The advantages of such a solution are:
- indisputable increase in space;
- increase in the level of natural lighting;
- The possibility of implementing a unique design.
All these facts are also in parallel and increase the cost of the apartment. For how easy it is to easily remove the partition between the room and the balcony, see this useful video:
But it should be noted and disadvantages:
- Long and not always a pleasant procedure for obtaining a demolition partition;
- Sometimes only partial dismantling of the wall is possible;
- The execution of such works requires some experience, so without the help of specialists can not do.
There are many firms that specialize in redevelopment. Often they are engaged in and receiving matching documents.