The father-in-law can be done in a short period of time, and it is enough to have only material, threads and some other technicians.
The emblem is usually located in the hallway or living room.
This is a very convenient subject of the interior, which, if desired, easily moves and becomes useful furniture.
Puf is very simple, so even if you do not have special skills in this matter, then you will definitely cope.
Bottles Pinds
You will need:
- Fabric for PUPPI;
- Dense sheets of cardboard or suitable sheets suitable and size;
- plastic bottles;
- Patterns on the fabric - they can be made to themselves;
- Unnecessary rags.
Begin to make the emblem with your own hands follows from bottles. We take them, press each other, wrap with scotch.
It is important that all bottles are tightly fit to each other. This will avoid a constant feeling when sitting on a ready-made buffer, which inside something unstable moves.
As for bottles, do not take those that even remember a little.
Only even bottles in the aggregate will give the desired effect.
Bottles will be convenient if the size of these devices is not too elongated.
Take a maximum of one and a half-liter bottles. If the pouf's height is not enough, you can get it up with rags or cotton.
When the size of the base is defined, you can start cutting cardboard. You need two details - for top and for bottom.
They should either correspond to the size of the perimeter of the circle circumference, but then provide for the widespread use of the rags, or be slightly smaller, and the rags will only be at the top for creating a soft effect when sitting.
If you wish to make a rounded pouf, it is better to evenly work with soft materials from all sides. You can take a foambone if additional costs are not frightened.
Article on the topic: Installing swing doors with your own hands
This option will be the easiest and give a neat effect.
But how to make the otfik, if the auxiliary material is not used?
It is more difficult, since the pattern should be done only in compliance with all sizes. In the case of the use of foam rubber, you have the right to errors, because all the convexities can be hidden due to volume.
When you make patterns under the database for Purific, do it yourself from bottles, secure them with a scotch with each other and attach to the Poof. Everything is fine? You can cut the fabric.
By the way, you should not forget about the place for the seam - one and a half centimeters need to be left.
You can use zippers from bottles from bottles, which will provide the ability to change the case, leaving the stuffing.
If you decide to make a removable emblem, then all the "insides" need to be copped with each other, so that during the shooting the cover did not fall asleep. To do this, it is enough to wind the bottles, foam and rags (depending on what was used).
Patterns are better to sew with a sewing machine. If it provides the possibility of embroidery, why not take advantage of it. That's all, the pouf is ready.
Bouffer
To make a pouf from a big bottle, you need to stockday two are the same.
Such furniture with female hands will look great and does not require great work.
It is better to take tanks for a punch of 19 liters.
One bottle partially fill in pebbles to be at least a small weight.
Before this, it is better to trim the upper part of it - the neck, but only in the place that does not lead to a reduction, that is, the widest possible way, as shown in the photo.
The other bottle is also cutting off, only the lower part is already. It needs to be "put on" on the neck of another bottle and fasten with glue. Scotch tape is not recommended - the pouf will quickly fall apart.
Article on the topic: Curtains and eaves in Erker - how to effectively choose?
Next, we make a rounded workpiece from cardboard for the future cover, cut out it slightly less than the diameter of the bottle.
In order for the puff to be soft on all sides, you can wind the resulting largest base from the bottle mat.
From the remaining part of the rug for pouf from bottles, you can cut the bottom in the form of a circle for pasting cardboard blanks.
Now create a case for Purphye with your own hands.
It can be knitted, can be stitched, and you can not do it at all - if the pouf rug was winding, why not leave it like that. Especially interesting will be the viscous case.
If the design of the hallway is being developed, then multicolored threads are used, which can be used under wallpaper or furniture in the hallway.
Cupid from construction
If there is an opportunity to get a building a building, which is used for cheating channels and other durable ropes, can be seen and get the original ottoman with your own hands.
For the bottom of the Moke, you can make a "cap" that will have narrow collected edges with a gum.
Decorate puffs with bows, beads, various decorations. You can use multi-colored fabric.
The upper part should be simply covered with a cloth. It is better to do it with your hands and right on the pouf so that there are no protrusions and waves.
The upper part may have a form of conventional soft pillows, which are also decorated with multi-colored fabrics and different crafts.
Crafts from plastic bottles are not inferior on beauty and grace similar to simple home objects of furniture!