Always I want the most significant day to decorate somehow differently. Finished decorations are quite expensive, and if you decorate with them a big room - it will fly into a penny. To date, a sufficiently large number of handicrafts. Flowers can be made by the reference, beadwork, cold porcelain, and even fooling from wool.
But all these options are time consuming and require certain skills in the technique of original colors from corrugated paper with their own hands can be made literally in 30 minutes. It is always fresh and creatively, plus you can add easy recycling.
In such decorations there are several important advantages that are knocking them into leaders:
- minimum amount of cash costs for the necessary materials;
- Flowers can be made so realistic that they are almost impossible to distinguish from living;
- Material can be bought almost in any stationery or needlework;
- Unusual beauty can work out without specialized tools and construct complex schemes;
- Fast utilization is particularly relevant when decorating large rooms or premises;
- will be an excellent gift or decor element on any celebration;
- This kind of decorations can even make a child.
Even with all the abundance of production methods with their own hands, flowers from corrugated paper were and will be at the peak of popularity. A wonderful way for self-expression and the incarnation of the most bold fantasies.
Preparatory work
Before you begin the sacrament of the production of colors, you must first of all, to provide yourself with all the necessary arsenal in advance. Corrugated paper is best to buy rolls, not sheets. The roll is a fairly large Method, which is enough for a whole heavy beam of buds, colors and petals.
Paper It is recommended to select more natural shades, if, of course, on the idea, the final work should look natural and natural. For buds, leaves and stems, you should take a few colors, in this case, you can play with shadows. Then the flowers will look more "alive."
For the stem, it is necessary to take a thin militant wire, floral sleeve or any other materials.
You also need a dense cardboard for cutting blanks, glue and sharp scissors. It is not necessary, but you can prepare a fishing line or durable silk threads and a sink knife.
It is best to work with good lighting, it can be like natural light and daily incandescent lamps.
IMPORTANT! If there are small children or animals in the house, it will work safely on a high table, and not on the floor.
The process of making flowers
At the initial stage, many needlewomen face a question: how to make flowers from corrugated paper and where, in fact, it is necessary to start. Of course, each craftswoman has already produced its technology and some small secrets. However, there is nothing impossible for those who want to achieve the heights of professionalism.
The most complex technologies are always reduced to the simplest steps:
- First, you need to draw the desired templates on the cardboard. For a more realistic flower, you should prepare several templates of different sizes and slightly different in shape.
- The more paper billets from paper will, the better. In this case, you can remember the beautiful flower of roses, which consists of a huge set of petals of a wide variety of sizes.
- After cardboard blanks are ready, you can proceed to cut them out of paper.
- Once all the petals are prepared, you can start creating the flower itself. To do this, you will need to take 5-7 of the smallest petals and tight them tightly at the bottom. Thus, a tight bud is formed. For strength, you can skill with glue.
- After the bud is ready, it follows with neat movements to attach each petal separately, a little stretching upper edges. Making these actions, the petal is attached to a natural wavy form.
- After all the petals were collected in the finished flower, it can be safely "satisfying" on the stem.
Article on the topic: Crochet Pink: Scheme for beginners with photos and video
Stem, like a flower, should be similar to natural. This can easily achieve with the help of conventional wire and green paper. It is necessary to measure the desired piece of wire or floristic sleeves and reorganize it with its prepared corrugated paper, cloth or even paint acrylic paints. Then attach the leaves and spikes if the flower implies their presence. The finished flower "seats" on the stem with glue. Since the wire and floral sleeve are movable, they can be given absolutely any forms and bends.
How to make realistic peonies.
strong>ByStep InstructionsPeony is a magic flower, which is traditionally symbol of purity and love. A cute bouquet will be able to become an excellent gift for a wedding or the birthday of the beloved friend. Peony flowers in nature have a fairly large size. For the bouquet of flowers, you do not need to make a large number of heads, it will be enough 7 pieces.
If there is a desire to achieve a shade close to natural color, you can take a snow-white or dairy shade paper and give several smears with pink, orange or peach acrylic. Make your own hands gentle flowers of peeons from corrugated paper can be in just 20-30 minutes.
At the first stage, it follows the pattern to carefully cut rectangles and slightly round them, thereby giving the natural roundness of the petal.
For the manufacture of one peony, you need to prepare 10 strips for small petals, 10 strips of wider paper for large petals and several strips of different size of green paper for the manufacture of leaves. To give a realistic form of peony, it is necessary to cut a slightly oval shape with a small leg, and the leaves are slightly pointed to the top.
After the forms are cut out, neat movements of the petals need to be slightly stretched into the width and height, until the petal is visually approached by natural. Next, give the petal bulge from the outdoor side, thus giving it some volume.
Important! When stretching petals or leaves, it is necessary to avoid using nails, otherwise tenderness and fragility will be corrupted by unwanted lines.
Then begins the process of "folding" of bud. To do this, take a few smallest petals and wrap one and another tight. During the wrapping, it is necessary to ensure that each subsequent layer overlap the seam of the previous layer. Thus, gradually, the petals are stacked at each other in layers. When the flower was assembled, it should be fixed with a thread, a fishing line or glue its base. Since the peony is a casually disheveled flower, then you can safely spend some petals of the finished product slightly and after that re-stepted stretch.
In total, about 25 petals will need for the manufacture of one peony. Caucasry are made of green paper. It is necessary to prepare about 10 green leaves, after giving the form, wrapped with a ready-made peony.
In order for the flower to turn out to be more voluminous and lush, at the initial stage in the core lay round candy or a shaped ball made of foil.
It should be remembered that natural flowers in nature do not have perfect-smooth edges and lines, so the smaller the accuracy in the bud, the better.
Article on the topic: Knit for dogs of small breeds according to the schemes with a description
M.
strong>Aster class on the manufacture of gentle liliesThe royal flower of lily is sensuality in combination with majesticity. Volumetric flowers from corrugated paper always attract attention. This is not only a good addition to the main gift, but also a magnificent decor element for any holiday or event.
Under the example below, it will be gradually described how the wonderful lily can be made from ordinary corrugated paper.
For work it will be necessary:
- paper light lilac, yellow and green shades;
- watercolor, gouache or acrylic paints;
- glue or adhesive gun;
- Wire for stem, approximately 30 cm;
- Tassel and sharp scissors.
If the paper is in a roll, then it is necessary to cut off the strip from it, the width of 7 centimeters. From the resulting segment, cut into small rectangular blanks, which should be given a rounded form of lilies petals. Then, the edges need to stretch a slightly with the pads of the fingers, for more naturalness, and twisted a little with scissors or a conventional pencil. Make a deepening in the middle of the petal, giving it a natural roundness in this way.
When the petals are fully prepared, the magic process of reincarnation begins. To do this, it is necessary to mix brown and dark lilac colors and draw natural dots to the resulting tone at the base of the petal. For greater naturalness, the points should be thicker at the base and practically disappear by the middle.
Stem is made from the wire. The desired piece of wire is cut and decorated with a thin strip of corrugated paper green. Before you restructure the wire, it is recommended to stretch it. This is done so that all unnecessary stripes and folds disappear.
On any edge of the finished stem, we make a pestle and form a stitch with a thermoclaus. For permissions, it is necessary to punish this place with green paint.
Stamens are made of yellow paper. A small smooth square is cut out of the roll. At its time, cut strips along its entire length, but the base is left solid. Then you need to twist the twisting movements every strip and the tip to handle a droplet of thermoclaster. After all the work is done, omitted made of the strokes in the semolina, to sneak acrylic or the gouache of the brown-chocolate shade and give to dry.
Leaves for lilies have a rather elongated shape. It is necessary to cut long rectangular strips from green corrugated paper, slightly stretching and turning them. We stick to the pestle of the stamens and add three petals of lilies to the finished design, having a little higher than the tips of the anthem.
After that, we glue three more petals over the joints of previous petals and tighten the edges of the finished flower again.
The final stage is the "installation" of the finished lily on the stem, adding petals and fixing glue droplets.
Corrugated flowers with candy
Each needlewoman having reached a certain level wants to do something extraordinary and memorable. No holiday or solemn event costs without sweets and colors. Modern craftsmen decided to combine these two components in one and call this direction by a sweater design.
Flowers made of corrugated paper with candy entered the fashion not so long ago, but they have already managed to conquer a fairly large number of the public with its originality and creativity. Today, through your PC you can see photos and videos with a huge number of master classes for the manufacture of an unusual bouquet. A detailed step-by-step description will help embody all your bold ideas into reality. The main thing is not to be afraid to experiment. Only in this case there will be bouquets that deserve to decorate not only birthdays, but also weddings.
For the manufacture of a bouquet you will need chocolate candies, preferably round shape and in wrapper. This will greatly facilitate the task during the formation of a flower bud. Paper can be taken absolutely any color, here you can give will to your fantasies. From the corrugations, cut squares, round them and form petals, by pulling out and stretching the finished canvas.
Article on the topic: how to make the skin of the skin with their own hands for beginners with photos and video
The next step will be the cutting of the squares of the film for baking. Candy is turned out to be finished square and a small tail is left in the bottom, which is then wounded by a beautiful thread or a gold ribbon. The finished workpiece is gradually, layer behind the layer, "wrap up" with petals, giving immediately the form of a natural flower. It is necessary to try to cover the first layers to cover completely candy, but the subsequent can already be semi-friendly.
Of the finished colors, a chic bouquet is neatly formed. This makes in different ways. You can separately "sit down" separately on a predetermined wire, you can use spanks, foam ball, plastic bottle or mounting foam. After the bouquet was completed, it can be reeded by satin ribbons, various lace, beads, stones or rhinestones. Such an original gift, definitely, will leave behind the indelible pleasant memories.
To create a spectacular bouquet, you can not stop in one form of the flower. It can be a variety of combination of daisies, roses, daffodils, poppies, tulips, orchids and so on.
Giant sizes flowers
Large flowers from corrugated paper can be done on any holiday. Such a decoration will always look festively and unusual. The flowers of the tender shade can be decorated with a romantic party or wedding celebration. Huge, but at the same time fragile, as if made from the porcelain, will be able to give the holiday even greater atmospheric.
For a child's birthday, products are suitable for bright and screaming shades. Indispensable will be not only in the decoration of the festive photowons, but also a photo shoot. Gorgeous growth flowers from corrugated paper will be able to "meet" guests before entering. With such a huge bouquet, you can adequately meet your beloved wife from the maternity hospital or to give his girl.
The phased process of manufacturing a large rose:
- On a dense cardboard draw a petal pattern in the form of a heart and a droplet;
- Cut from paper on the template of 15 large hearts and 5 petals in the form of droplets;
- Each carved petal should well stretch up and on the sides, giving it the form of naturalness and naturalness;
- The lobes in the form of droplets must be beautifully wrapped the edges, with the help of a pen or pencil;
- Petals in the form of a heart we make wavy bends with a pencil only on the sides;
- For the stem, you will need a piece of conventional soft wire, which is necessary to reorganize with a floral ribbon or corrugated paper of a green shade;
- The formation of buds should be started with small petals, pre-glueing them to the stalk of the glue droplet;
- After the base is formed, the droplets first are glued alternately, and then heart;
- from a long strip of green paper, carved a cup of small cloths;
- The finished bowl is fixed around at the base of the bud, is fixed with adhesive ribbon of green or a drip of glue.
At this stage, the rose is fully ready. In order to make the leaves should be cut from the green corrugated paper oblong molds. After that, on the middle of the finished sheet, lay out the edge of the re-corned wire, pre-dlying with glue. Then fold both halves of the sheet so that the wire is hidden inside the petal, and the remaining edges of the paper are dispersed back.
At the final stage, the leaves are attached with the adhesive tape to the stalk and decorated with corrugated paper or several strokes of acrylic paint.
Giant flowers from corrugated paper magically will be able to turn the most ordinary holiday in an enchanting celebration.