Nowadays, the clock is performed not only the function to view the time, but also the role of the stylish accessory, which is why their appearance is very important. Probably, few of you think about how to create a wrist watch with their own hands is a very exciting occupation. Thus, you will save not only money (after all, good hours are a considerable amount), but also make the original design, which you like to do, and most importantly - in size.
Hams with leather straps
In this section, we will tell you how to make classic clock with leather straps.
For this we will need:
- Old clock (if you do not have those in stock, buy the most budget);
- straps made under the skin (about 70 cm, be sure to note that the width of the strap corresponds to the sizes of the original watch strap);
- a small chain with decor elements;
- hole puncher;
- Rivets.
After you have collected everything you need, you can proceed to work. So, let's begin.
The first thing you need to do is to fill a new leather strap. Crop needed to the last hole in the belt. If the edges look inactively and wrap, then definitely fall the edges, it usually happens if the material is unpretentious and you have leather.
Now you need to get two parts from a 35 cm strap, cut it so that one end remains with a fastener, and the other with holes. Sample on your hand and, based on your hand sizes, make missing slits using holes. Attach rivets.
So, we got the main framework of the clock, it remains to be decorated. To the side of the strap, which with clasps, attach a chain with decorations.
You can decorate leather belts using stone or rhinestones. Here you have to show your fantasy, the main thing is that everything is in moderation and did not look ridiculous.
Such an accessory will decorate any of your image and gives him a highlight, such a model of the clock will only have.
Article on the topic: Brooch do it yourself from beads: how to make with photos and videos
For fiction lovers
Such hours will definitely suit fans of fiction and adventure. Which of you in childhood did not read the novels of Jules Verne, Alexander Belyaeva? This master class will be very interesting to boys. It will be performed in the style of steampunk. Perhaps the most difficult thing in this lesson is to find all the necessary materials.
We will need:
- Old wrist watch (you can take completely any);
- The new body made from brass, most importantly, so that it approaches the diameter to the clock;
- Disk of a rounded form of stainless steel;
- Old watch, you can take alarm clock;
- Several leather straps (you can replace with dumping from the leatherette);
- Two clusters from the clock;
- hole puncher.
After you have acquired everything you need strictly on the list, you can proceed to the "invention" of the watches in the style of steampunk.
Take the wristwatch and carefully remove the straps from them. Now you need to get rid of the remaining ears on which the belts held. You will be able to cope with it. If you are afraid to scratch the dial, then better give the specialist. Take a cooked disk from stainless steel and overload it under the diameter of the available hours, it will serve as the back cover of the case. Now it is necessary to make holes for fastening on all four sides of the disk.
For the originality of your watch, you can make engraving, probably you have a cherished phrase that you would like to capture. Now there are a lot of specialists who are engaged in engraving, so when our masterpiece will be ready, you can attribute to his master. Well, we will return to our craft. Take the alarm or unnecessary clock, open the housing and disassemble the contents into separate parts.
In the declared style it will be very appropriate to look at the different configuration of the gear, but if your look will delay on other elements interesting to you, you should not forget about them, in our case everything goes.
After that, assemble the cluster of the clock and place the front side down. Load the glass and spread the dial, gears and other details in chaotic order on it. After that, close the housing using the back cover and make it with screws. Wear straps. Make one billet, the width of which is six cm, and the length directly depends on the width of your hand (wrist). In addition, cut out a couple of narrow belts. To one of them, on one side, two clamps on one side, and on the other side of the hole with the help of a hole punch.
Article on the topic: Appliques for children 1-4 Class of colored paper: Patterns with photos
Plugs attach in such a way that they can be freely fastened on the hand. Assemble the clock and attach the dial to narrow straps, and the resulting clocks connect to a wide part of the belt to get a bracelet with the dial in the center. Your watch are ready!
Video on the topic
Thematic video selection: