Products from healthy materials are becoming more popular. For example, you can collect the ottoman from plastic bottles. The cost of the product will come out about once every 5 less than the cost of purchased. Most of the required materials are at home at each needlewoman. In addition, nature will say: "Thank you", if instead of throwing out the packaging, you use it, turning into resellers.
Preparation of bottles
Before starting to work, it is necessary to prepare the main material. Bottles should be rinsed well inside so that there is no smell. Outside it is necessary to soak all the labels and scrape them and the remnants of the glue. Leave for drying.
Plastic bottles seem rather fragile material, but there is a way to give them extra strength. To do this, unscrew the plugs and deliver the package to the balcony or put in the refrigerator. After a night in a cold place, tighten the plugs and bring bottles into a warm room. Put them under the battery. Air in closed containers will heat up and expand. Due to such thermal processing, plastic will become stronger.
Necessary materials
What else will need to create a PUPP? To understand the process, watch the video:
So, to proceed with the master class, prepare:
- 14 bottles of one size (color can be different);
- marker;
- Lobzik;
- Double-sided tape;
- durable threads;
- Tolst needle;
- stationery knife;
- Foam rubber for upholstery (it is better to take at least three cm thick);
- Two trimming of plywood or other durable material;
- fabric for a cover;
- Rule.
All, materials are prepared, you can proceed to work. The result will be about as in the photo:
Getting to work
It is best to work on the floor or on the table with a smooth table top, since it is required to collect all parts in the same plane for the stability of the product.
Wake up two bottles of scotch tape, tightly pressing them to each other.
Article on the topic: how to sew an angel with do it yourself
Make two such blanks. Scotch does not need to regret, as the quality of the PUPPI depends on the quality of the winding. Take three bottles, put them in a row, align and wrap a scotch. Make two such blanks of three bottles.
The remaining four bottles are connected by the same principle. Watch that the bottoms stood in the same plane without fascinating.
Collect all the items. The middle of the product is a series of four bottles. Next, parallel to this row with two Toron is put billets of three bottles. Similarly, billets of two bottles are fixed. It turns out a hexagon.
Connect all parts without scotch. Special attention is paid to the binding of the principle of the perimeter. It is important to fasten the blanks on a flat surface to withstand flatness.
Install the billet on the phaneer, marker, mark the circle boundaries. Drink up the top and bottom of the puffer from plywesk. Make the perimeter small notches.
DOW PLAY on one side with a dense cloth - so when moving along the floor, traces and scratches will not remain.
Stick Phaneur to bottles on both sides. For durable compound, wrap a solid thread of the resulting design. The thread is comfortable to be trapped on the plywood.
Take the foam rubber and cut a rectangular piece from it. The width of the piece must be equal to the height of the Punch plus the seam allowance. The length of the foam rubber should be equal to the length of the circumference of the plywood elements. Sust in the foam rubber so that the cylinder is.
Purphine seat, too, cut the foam rubber. For softness, you can make several layers. Sustrate the foamo seats with foam rubber sides.
Separately, it is worth sewing a removable case. It can be easily removed for washing or replace when you update the interior.
Now you know how to make a pack of plastic bottles yourself. The instruction is shown step by step so that you can create your own products based on it. You can experiment with the form - make a rectangular seat for the seat. You can experiment with a height, making a second series of bottles.
Article on the topic: Snud-pipe with spokes of thick yarn with schemes and descriptions
For the children's room
Due to the lightness and strength of bottles, as well as their low cost, it is recommended to create a fatherfoot for children together with the child. For the smallest enough just five bottles. Such a doctrine easily takes even a child. He can also decorate the pouf alone, the benefit that paints, brushes and pencils are always at hand.
Many believe that bottles are waste, of which it is impossible to create anything good. However, in the presence of fantasy and skillful hands, it is possible to make products that will serve you for years. Due to the cheavering of materials, such a doctrine will not feel sorry to take a balcony or use in the garden. Judging by the reviews of those who already use in everyday life from bottles, it is strong enough and withstands the weight of an adult.