Production of Rashalovka do it yourself
Catching crayfish is a simple occupation. It is enough to have Raskovka (raffle), which can be easily made with your own hands. The simplest and most common design of the Rashovka is a ring of steel wire with a diameter of 40-50 cm. Covered with a grid. The lack of such Rashalovka is that it must be checked every 25-40 minutes. Since the crayfish becomes, can easily leave it.
Rashalovka, the manufacture of which is described below, can be left overnight, because 90% cancer that fell into this raffle is hard to get back.
For the manufacture of Rhakovka, we will need it:
- fine grid;
- wire with a diameter of 4-6mm.;
- plastic clamps;
- Kapron thread.
First of all, we make two metal rings. The lower ring with a diameter of 40-50 cm., And the upper ring with a diameter of 15-20 cm.
We grab the grid to the ring with plastic clamps every 5-7 cm. Instead of plastic clamps, you can use a kapron thread.
We make three struts, from the wire smaller diameter, for these purposes I used the electrode D 3mm. The struts must be made equal length and so that the ring of smaller diameter is in the center at a height of 12-18 cm.
To Rashovka, for the convenience of transportation, it was possible to add one of the three spacers removable. The remaining two are fixed on the rings.
After the struts are installed, we are tightening the sidewalls of the Rashalovka. And we grab the clamps on the top ring.
Clamps on the upper ring of Rashalovka Brepim with a pitch of 10-15 mm. After that, it is superfluous to cut and Rashovka is ready for operation. Now you can safely throw Rashalovka into the water and in the morning with a calm soul to collect a harvest :)
For the last, I want to note that the bait should be tied to the bottom of the Raskovka. It is best to use fresh fish, not a rotten, as many consider. Experienced Rakolov put with bait also a bit of dill and, in the mesh bag, a piece of cake and a hunk of rye bread, whose crust is rubbed garlic.
Article on the topic: Combined wallpapers: 5 ideas for design and photo
Video for the manufacture of Raskovka do it yourself: