The attitude allows you to create an additional magnificity of skirts and dresses, giving a new sound with familiar outfits and bringing flirting of flirt in your image. Depending on the desired volume and magnificity of the attachment, it can be sewed from cotton, silk, organza and other tissues.
The following is a sample and manual for modeling a three-tiered attitude. We will need fatin, satin, thin mesh, lace and tapes for decoration.
We start with the measurement of the length of the skirt (here - 55cm), the length of the padriness must be shorter by 2-3 cm.
This is an example of cutting.
Be extremely attentive, retention fabric, errors at the initial stage of work will be jeopardized by the breakdown of your little masterpiece. Perhaps one of the home will be glad to help you.
The dimensions of the details are as follows (inputs for seams 10 mm):
1st tier: 120 per 16 cm, you need to make 2 fatin parts and 1 of the atlas.
2nd tier: 240 per 18 cm, 2 Fatinets are needed and one of the grid.
3rd tier: 480 by 22 cm, we make 2 fatin parts 1 from the grid, stitched from 2 tapes of 2.4 m).
Next, we deal with how to sew a fit of the fate.
I. Main details
1. We fold the cut of the second fatin part and the slice of the lace (top), with the fatin and the lace with a five million metering curtain. Sutting the seam on the front side and tighten the lace cut from the tenth part to hide the seam behind the fatin and lace.
2. The upper cut of the first part is stitching with a stitch width of 4-5 mm by 5 mm from the cut, another - by 9 mm. We assign the top so that the outcome length of the part was 2.4 m.
3. We fold the second and third fatinets by cutting, sweep. Step 10 mm closer to the 2nd seam of assembly.
Now you need to unscrew the seam up and rest. Close the seam ribbon and take it so that the seam and the allowance on it are closed.
Article on the topic: Openwork rubber bands: Schemes with description, photo and video
4. We suggest the upper cut of the 2nd part to 1.2 m, connect the 2nd and 1st fatin parts, repeat item 3.
5. We fold and pick up the longitudinal sections of the first layer of the adjoiner, we combine the seams (cut the asymmetric sections if available). Still cuts on the width of a feet of 5-7 mm, cut the seam to 3-4 mm. Now turn the skirt on the front side, straighten the seams, we scatter and affect. Tighten by 4-5 mm from the edge (cuts go inside). We are glad to right, smooth, taking away 1 mm from the edge of the seam.
6. Now stitching the 2nd layer of the attitude: 1st item from the atlas, 2nd from the grid, the third of the grid.
7. Stitch the 3rd layer (all fatinet details).
8. Alternately we fold the resulting layers of the front side up, we roll their seam over the seam, we turn on the upper cut by 10 mm. We measure the circle at the top of the cut.
II. Belt
1. We note it length, step up to half the width, smoothing the seam. Fold the belt half, smooth the fold.
2. We fold the face of the attachment with the front side of the belt, feed the belt by 10 mm. Sangered belt up. The 2nd slice of the belt is reducing down, clamping a cut by 8 mm, overlapping the seam of the belt of the belt by 2 mm. Next you need to notify the belt and sew its bottom secret stitches.
3. 10 mm from the top edge of the belt, we perform four lines to make a gum later.
That's how you can sew a magnificent pushing. Ready!
New ideas and inspiration!
Akari.