How to put a castle?
Interior doors are often equipped with locks that allow you to close the door from the inside and will prevent the passage to the room. However, such a design will not be able to withstand hacking. If you are wondering how to put a lock on the interior door with your own hands, then read the following tips, thanks to which you can easily make it easier.
Required tools
In order to install the lock on the interroom door, you will need the following tools:
- screwdriver;
- chisel;
- a hammer;
- screwdriver;
- Two wood crowns.
Prepare all tools can be processed to the device itself.
Marking
At the initial stage of work is marked:- According to the instructions, the layout of the lock is applied according to the basic properties of the device. The handle must be placed on the doorway in such a way that it is on a convenient for all residents of your home altitude;
- The castle itself is established according to the instructions, which always comes in a complete set with accessories.
Although you can use easier:
- attach a shut-off product to the interior door;
- Make marking with a simple pencil.
Almost all standard locks are set as follows:
- 5 cm are measured from the end of the canvas;
- At this level, the label is set;
- After that, with the help of the crown with their own hands, it is done under the goal;
- First, the crown make a hole in the place of the tag;
- After that, a small crown is drilled by the opening in the end of the canvas;
- Next, try the lock as shown in the photo;
- If there are some irregularities, then with the help of a hammer and chisel carefully correct them.
It is worth remembering that the holes should turn out a little more of the lock itself, then the installation will be comfortable and correct.
Insert
- Usually put the lock is not difficult, since almost all products have special latches;
- First, the holes for the self-tapping screw are done by drill on the end of the canvas and on the end locking bar;
- Next, the bar is screwed to the door with self-draws.
Article on the topic: How to make a pond in the country, in the garden, near the house
Sometimes, during the installation of the lock, some problems may occur when the handle does not occur at that position as it should. In this case, the handle will need to rearrange, as shown in the video:
- To do this, it is necessary to remove the locking spring;
- then change the handle places;
- Next, set the spring. If the spring cannot be installed with your own hands, you can use a screwdriver by pressing it the spring and inserting into the groove.
Cutting magnetic device
Magnetic locks are applied not so often, but recently the demand for them is constantly growing. These devices can be
- For the device such a product, a special adapter will be required, as shown in the photo;
- Instead of a latch in such a product there is a strong magnet, which is also attached at the top of the door;
- The canvas also attach an additional plate and power supply.
The main advantage of such a design is that this device can be controlled remotely. However, if the house turns off the electricity, then such a device will not work.
Let's summarize
We learned how to correctly install the lock on the interroom door. These skills will be very useful for a good owner, thanks to which you can not only put a locking device with your own hands, but also to save a family budget.