After laying ceramic tiles and during, many are faced with a problem, how to make holes in it. Of course, you can hire the masters, but it is expensive and sometimes (depending on the qualification of the master) is not qualitatively.
There are several ways to drill tiles
At home. The tool for this has every good owner of the house, who likes to work with their own hands, thereby saving his means.
In the process of work, you will need:
painting tape
Feltaster or marker,
drill,
Ring saw with diamond spraying,
Special winners or with diamond coating drills,
a vacuum cleaner.
First, we visually determine the place of the future hole and marker are methim. After that, cut off a piece of painting tape and glue it to the label. We take a drill and fix the drill that is intended for work with a tiled or glass. If the drill is the function of the impact mode, it must be turned off.
We begin to drill tiles on small revolutions, with time increasing them. The painting tape at the same time acts as a retainer (the drill does not float on the tile).
After the tile was drilled, replacing the drill, depending on the material under the tile. We continue drilling for fasteners.
When the work is performed by a vacuum cleaner, we remove all the dust, but it is more convenient to keep the nozzle of the vacuum cleaner directly during drilling from the velocked hole.
Sometimes, especially for the drilling of tiles for the floor,
At the place of the future hole make a small chip challenge.
This is necessary for a better, more accurate drill passage.
To do this, take the most ordinary tap, slowly and gently tapping to them at the placed point of the hole. After proceeding with the method described above.
If larger sizes are needed (under the socket, for plumbing) use a ring saw or a drill entitled "Ballerinka".
When working with an annular saw, the process is the same. The difference is that first in the drill insert this tool, and then the drill itself.
Article on the topic: Reactive resistance or transformer impedance
In the process of work, we welcome the tile and drill in water to maintain the quality of this material.
Read how to drill glass.