In each house, a lot of small things are accumulated over time, which is difficult to find a certain place. You can try to streamline them, spreading in different boxes and baskets. So that the container looked is organic in the overall space, it is worth making it extraordinary and stylish. Usually this basket is performed with their own hands using the desired material.
When choosing a form, color and material of the future product, it is recommended to pay attention not only to your own preferences, but also on the stylistic room. For example, a suitable decor for the cottage will serve a wicker basket. It is clear that it is not always possible to fulfill it in the traditional way, that is, from the vine. In this case, an excellent replacement will serve as a regular newspaper.
Oddly enough, such a fragile material gives a fairly durable product at the exit. At the same time, the cost of such raw materials is minimal. It is only necessary to properly prepare a newspaper to work.
For the task to be satisfied, it is advisable to pay attention to our master class on the manufacture of "newspaper" baskets.
Original braid
A small basket will be wonderful to look at the kitchen, performing the role of a vase for sweets or bread beds.
To work on the product will need:
- newspaper sheets;
- PVA glue;
- scissors;
- acrylic paints, brush;
- knitting needles;
- Varnish, Morilka (optional).
The beauty of such a thing is that it is possible to make it can be made of girlfriend.
The whole essence of the originality of the work lies in the preliminary stage - the creation of thin tubes from the newspaper. Of these, weaving will be performed.
To do this, we need to put the newspaper in front of you and determine the location of paper fibers in it. This can be done by twisting a newspaper piece along and across.
On the longitudinal fiber paper turns easier and more careful. It is along the longitudinal lines and you need to cut the newspaper on the strips of 7 cm wide.
Article on the topic: Bruges Lace Crochet: Schemes and models for beginners with video
On the prepared knitting needle, a dense winding of the newspaper canvase is carried out. At the same time, the needker is located at an angle, as shown in the photo.
It is necessary to consider that when there is a white newspaper strip on the right, the tubes will be white. Such a nuance will be useful with the further crosses of the workpieces. The free edge of the newspaper strip is fixed with glue.
A similar method is manufactured by the desired number of tubes.
For weaving a small decorative basket, it is enough to make 30 tubes with a length of 50 cm.
All billets are painted with acrylic colors in conceived colors, after which they are left on drying.
This step can be skipped and paint the product at the end of work. True, uniform staining in the latter case will achieve more difficult.
The next step is weaving from newspaper tubes. Work begins with the pancake basket. Ten tubes are located pairwise crosswise. At the same time, three pairs are put perpendicular to the remaining two and come up to each other in a chess order.
An additional, separately taken tube, is twice and wrapped around the first pair. For convenience, this pair can be labeled with a marker. The auxiliary tube is crossed and encourages a neighboring pair. This principle of weaving is repeated in a circle with each pair.
The next circle is performed in the same way.
Then the paired tubes are separated. In the third and fourth row, each tube should be separated separately.
The ends of the auxiliary tube are displayed up.
Starting with a label marked with a marker, a negative tube is braked, then the first is displayed upwards. The second tube repeats the previous action and also bends perpendicular to the bottom of the product.
Such work is carried out until all the rays remain upstairs.
The last tube must be returned to the first beam loop.
Another auxiliary tubule will be useful, which flies raised rays already known in one by one.
You should make four such lines in a circle.
Optionally, you can dilute weaving by beads that are rolled out on the tubes through one.
Article on the topic: Openwork Angels Crochet. Schemes
Weaving continues to the necessary height of baskets.
On the sides, it is necessary to leave three tubes, the rest of the same thing, pre-fixing them with PVA glue at the base.
The ends of the tubes are connected to each other, forming the handle of the basket. It remains to proper. An extra tube is taken, which is fixed with glue on one side of the handle and grind tightly along its entire length.
To increase the strength at the last stage, the basket is fully labeled with PVA glue.
Tip! If the tubes were not scratched in advance, then the product is subject to finish color and decoration. Alternatively, you can use the decoupage technique.
Cart in the style of country is ready.
Interesting options
When you want to create an original basket with small efforts, you can build it out of the box.
For this, any cardboard box suitable in shape and size is suitable.
The basis of the manufacturer of the basket in this case is a high-quality decor, allowing the box to give a box. You can do this by sizing the bottom and walls of the box with dense rows of twisted twine.
You can combine the box and rope. The bottom of the basket will be directly the box with low walls, where wooden sticks are perpendicularly fixed. Next occurs the braid of these sticks with a handmade cord.
For example, a basket from a rope does not require mandatory staining and looks harmonious in any interior.
With a cluster of different loosk, you can make small fabric baskets. Combining textures and bright colors will help them fit into the children's room or refresh the boring interior. The basket of fabric is also quite suitable for storing homemade little things.
Video on the topic
How big is the fantasy craftsmen in the manufacture of baskets, you will demonstrate the video left below.