Dimensions and weight of sash can be very different. As a rule, furniture or interior doors are performed from relatively lightweight materials, but the entrance, and even more so the gate may differ very large. Accordingly, even the easiest option is the average steel design, weighs at least 100 kg, which implies enhanced accessories.
Choose loops
Door hinges for doors
It is worth noting that such fittings are required only with a truly solid mass - from 70-100 kg. With a smaller weight, it is quite possible to do with conventional species, but from more durable materials - steel, and in more - not 2, and 3 or 4 canopy on the sash. As a rule, for a wooden interior canvase, this is more than enough.
However, the entrance flap needs more solid devices. It is understood not so much a special type of fittings, although there are such how much enhanced design and the inability to use light options.
Overhead hinges for heavy wooden doors
Overhead canopies belong to the easiest and most famous. Those options that are installed on interroom, and occasionally and on the furniture sash, are not suitable for the entrance door, of course. We are talking about special metal products imitating antiquity and representing a massive reliable design. For the entrance to the apartment, the option is completely not suitable, because the invoice does not have protection against hacking, but such a solution is also possible for a private guarded house.
Furniture loops for heavy doors also belong to the category of invoices, but they are not installed on the input flaps: the weight that they can withstand is small.
Article on the topic: Italian wallpapers: for walls, photo in the interior, Zambaiti Parati, Sirpi, Emiliana Parati, Decori, Portofino, Limont, Emere from Italy, video
Curling fittings
The option is more reliable, because the plates that are attached to the door canvase and the slope of the frame remain inside, that is, the protection of such a sash is higher. Sports of this kind are cut into a wooden product and welded to a metal. "Loading capacity" of them is much higher - minimum 100 kg.
With high load, a larger number of canopies are installed: 3 and 4 are installed on a heavy inlets.
Hidden canopies
Door hinges for heavy wooden doors or metal can be hidden. For the input model, this is the best option because they are distinguished by burglar resistance. When closing the sash inside, the swivel axis itself turns out, so the hidden fittings are simply not visible and not available on the outside of the sash.
Hidden canopies have 3 swivel axes - movable and 2 fixed. It provides the versatility of the product: it is possible to open and right and on the left side. It is possible to install them only on the door leaf of sufficient thickness, because to place a canopy you need to form a rather deep niche. It is impossible to install a hidden design on the furniture sash.
Screw models
Another option for wooden or steel sash - brand canopies. Here only the swivel axis remains in appearance, and pins are screwed into the frame and to the end of the canvas, or welded if it comes to iron construction. Plus the design is that it is adjustable: you can always pick up a loop if the sash sacked.
The lack of solution is the weight limit: accessories does not withstand more than 100-120 kg. And for heavy sash, it is necessary to use screw canopies with the number of pins at least 4.
Door loops reinforced for heavy doors
For the most severe metal structures use special reinforced canopies. They also belong to the category of adjustable: canopy, repair - everything is possible.
- Loops on bearings - rolling or sliding. The first are designed for relatively low weight. The second with success is withstanding the severity of garage or entrance gates. This option is considered the most reliable and durable. In the photo - canopies on bearings.
Article on the topic: how to protect the corners at the plinths
