For many people, the question of the acquisition or order of the folding bed-cabinet is relevant. This modern technological development can very well complement the interior of your room. But we can order such a product everywhere. Is it possible to the Clawed Bed-Bed Question yourself? Maybe.
What is needed to make a cabinet bed?
Folded bed
Three components are needed:
1. Mastery skill;
2. Tool;
3. Means ($ 300-1000), depending on your skills and opportunities.
Let us dwell on each aspect.
1. The ability to crash - assumes that you have a certain experience in using the main carpentry tools, and the classes of this business brings you pleasure. If you did a bedside table, a shelf or a birdhouse in size and your creation caused admiration among others, then you can definitely make how to make it, and you have every chance to make a bed yourself.
2. Tool. Need a corner, level, roulette, ruler, joinery pencil, saw with a fine tooth, drill with a perforator. Screwdrivers, pliers, clamps, keys, file, grinding paper, sapozhnitsky knife, drill, hacksaw for metal. The missing tool can be purchased, but without it without it when creating a folding bed-cabinet will not work.
3. Means (costs). Before you begin to implement the project, it is necessary to pre-calculate the cost of work and materials and add 10 percent of the total amount for unforeseen expenses.
Where to begin?
Before starting work, you need to clearly define the overall dimensions of the design and all structural elements of the future bed. Design all nodes, fastening elements, decide on materials and, most importantly, with a closet bed lift mechanism.
As a rule, this design consists of three main elements: from a firmly attached fixed base and with the actual mobile base-bed with a mattress, which are connected by the hinge.
Article on the topic: Why the energy-saving lamp flashes when the light is turned off
Let us dwell on each element more specifically. Each of them performs only to it inherent in the functions, and the reliability and functionality of the future product depends on the scorizability in the approach to the implementation of elements.
The fixed base should be strong enough by itself, because on the destination should be withstanding a serious load, because the moving bed and the lifting mechanism will be attached to it, and in addition, the base should be firmly attached to the wall or ceiling and the floor. Options for performing this element of bed can be a lot. Furniture manufacturers make the basis mainly as a box to a closet that is additionally attached to the wall.
The wall in this case should be posted at least two bricks. Since the furniture is made from the chipboard, then in this design of the base, it is justified to increase the vertical walls of the base to which the movable part of metal corners or a solid wood board is mounted. Chipboard is too fragile material to withstand a serious load, and in such a massive design, like a bed-cabinet, there will be no stead of strength.
Also, the base can serve as two vertical support-supports from a strong dry board or metal pipes, securely fixed in the ceiling and floor.
The lifting mechanism is a link between the static base and a movable frame with a mattress. The options for its execution can be a lot, the main thing is that the lifting mechanism is as durable and so that it is securely attached to other elements of the design. It can be garage curtains, a bearing pin, a solid axis passing through the entire width of the bed and movably connecting with the sidewalls.
But the hinge himself is still half an end, the frame with the mattress should easily rise and fixed in a vertical position. There are also several options here. Ideal for this purpose, gas shock absorbers (elevators) are suitable for this goal, blocks of twisted springs, a counterweight, which is fixed on the movable bed-frame to reduce the load during lifting. The movable part must be as easy as possible to reduce the load on the entire design and the lifting mechanism.
Article on the topic: Decoration of walls with butterflies do it yourself from newspapers and clay
Ideal for the lifting part, a factory orthopedic frame is suitable, consisting of a metal profile of a square cross section and birch lamellae, which make plywood and bend in a certain way. Such a lifting part will be as easy and functional as possible.
The orthopedic frame is completed with legs whose height can be adjusted to the desired dimensions. And so that the mattress does not shift around the perimeter of the orthopedic frame you need to make a side of a high-quality board or plywood.
The ratio of the power of the springs and the rolling part of the bed is determined by the experimental method, depending on the weight and materials from which you performed the elements of the structure.