If you decide to install interior doors in the apartment with your own hands, we should not forget about such an important detail as a good interior door. Quite often we are faced with a problem: the door frame does not match the width of the wall. In this case, dobori will serve as a chopper wand. In order for the installed door to retain the external attractiveness and a neat look, you must follow the installation and installation of telescopic sobers for interior doors.
Telescopic Dobor on Doors
What is telescopic good
This is a special design that serves to disguise the connection of the door frame and wall opening. They are facing the doorway in the wall. This is a disguise in the form of a plank covering the wall in the opening and connecting with the door frame and platbands. With it, the lack of design width is eliminated.
Telescopic good
Installation
Installation carried out on the principle of rack-lining, it looks simple: on the one hand there is a groove, on the other - the ridge. Thus, the material of any size can be installed on the doorway. When it is fastened, the use of glue does not need, since the correctly installed design provides a clear grip "Schip-groove": the good is firmly connected to the door frame and platbands.
Installing Door
What is the telescopic good room interior door, you can look at the photo. It is a panel with cutting longitudinal grooves in side ends, serving to reliably fix the door with the door frame.
When installing the door in the doorway, which is wider than 140 mm, it is better to use not usual, but a telescopic good. If the doorway is too large, it is necessary to order a design for individual sizes.
Dobor device
Materials from which this design is manufactured can be different. It is important that they coincide with the color with the door and were durable. Standard sizes of telescopicobas for interior doors are 90, 120, 150 mm.
Article on the topic: How to cover the lining indoors
Installation scheme
Materials
Materials from which telescopic fastening structures are manufactured:- MDF;
- Chipboard;
- wood;
- plastic;
- aluminum.
Details of the design are separated from the 3-sides veneer, then, for protection against moisture penetration, varnish are covered with varnish. The texture, the color of the veneer is selected according to the color nuances of the door canvases, everything in the kit looks harmonious.
How to choose dimensions
Is it worth it to carefully choose the size, if any material can then be adjusted and cut? An important nuance: the wider and longer design, the more expensive its cost. The telescopic voltage is the width of the decorative plank starts from 60 and comes to 80 mm. And the width of the shelf, which is inserted into the grooves, as a rule, 40-50 mm. Standard Kit Length: 2 Put 2.2 m and one 1.2 m. Additional fair rail can have a width of 80 to 100 mm. Standard rack length, corresponds to the main platform.
The main steps of the installation can be viewed on the video.
How to make installation with your own hands
Installation of telescopic problems for interior doors with their own hands is not such a difficult task.
An important element when choosing a good is the width of the doorway.
Dog design reliably eliminates all errors in size. Mounting takes a little time and will not require additional tools.
If the good is attached to a flat wall, you can use liquid nails to avoid damage to the wall and securely fix the design.
The standard width of the interior door is 50 mm. Before going to a construction store, you must also measure the width of the doorways. The technological gap of the box board is overlapped with a minimum size of 50 mm. Based on this, the appropriate design is selected in the store.
In the store you will be provided to choose a telescopic stripper, which includes a telescopic platband and a challenge. From the usual casing, the telescopic is distinguished by the presence of a special part in its design - perpendicular to the wing platter. And the Dobly Plank is equipped with a special groove, which enters this wing.
Article on the topic: Ecopol - Gypsum Bulk Paul
This structural part serves quick and reliable fixation when installing the door. The design is well attached even to uneven walls. It is important that the cost of the telescopic handle is not much more expensive.
The algorithm for installing a telescopic problem:
- The start of the installation is always made from the highest element.
- The wall is cleared, the surface of the fastener is degreased.
- Planks are pressed and closed.
- The lengths of the sidewall are measured, if necessary, the excess is cut.
- Telescopic dobors are attached to the door frame.
- The lock is starting to the depth needed so that the plank is completely blocked the wall.
- It is necessary to catch a bar on the perimeter.
- Now you can proceed to the installation of platbands.
What elements to choose are simple door or telescopic - to solve you. Experts advise to establish telescopic dobors to the interroom door, since they are with minimal efforts to provide an impeccable appearance of the doorway.
This modern technology will save your time, give an attractive type of apartment interior. Casting once on the telescopic design, you will get the maximum comfort of your home. The refined doorway guarantees an attractive appearance for many years.
Installing interior doors with their own hands - a simple occupation, subject to even to amateurs.
If you correctly make measurements, pick up the appropriate size of the design and not to get down from the level, then at the end of the work you can get a great result and, it is important, to save material tools. After the installation is completed, platbands are installed, and the doorway immediately looks crushed and pleases the eye.