The need for a table, which can be brought to a picnic, and there quickly collect and disassemble with your own hands, it happens great. Make a table for a picnic with your own hands is not too difficult, and time takes out not so much. This skill will come in handy in life, as the ability to work with a tree and knowledge of the basic tools is important for a comfortable life. It is best for making a table to choose a tree, since this material is easy, durable and environmentally, if all the steps of its processing are passed. Working with a tree is easier than with plastic, and the initial woodworking skills are well mastered on such simple items.
Scheme with sizes of folding table with removable legs.
Picnic table - varieties
The appearance of the tables for a picnic differs in the form of table tops - it is most often rectangular, but there are also models with a round or square, and sometimes figure surface. The legs can be made of steel, aluminum or wood.
Most often folding tables for the picnic rectangular shape, but come round.
If the legs lie down in parallel, it will be convenient for this table, but the design will become less durable. If the legs are arranged crosswise, they are very steady, but it is not very convenient to sit at this table. For uneven surfaces, it is desirable to provide legs removable, which could be adjusted in height. When choosing tables of this kind, it is necessary to navigate not to appearance and size, but on the design features.
For picnics and other trips to nature a good option is a tabletop of lacquered plywood, since the material of this moisture console and will serve for many years. This type of material refers to those that are easy to clean and do not absorb smells. Conveniently in the center of the countertops to provide a hole for the awning to make rest in nature even more comfortable, but the ratio of the table and the awning should be well thought out so that the whole design does not overturn on the wind.
Article on the topic: Drawings on liquid wallpaper
Collapsible table with your own hands
Made of wood or laminated chipboard tables with parallel standing legs look very carefully. Materials and tools needed to make a table for a picnic with their own hands belong to the category common, and you can find them in almost every construction store. For the folding table, you will need:
Drawing with sizes of a folding rectangular table.
- shield glued from a natural tree;
- Bar;
- reinforced washers;
- Furniture corners;
- furniture loops;
- lamb nuts;
- rivets;
- screws;
- hacksaw;
- electric drill;
- screwdriver or screwdriver;
- Pencil or marker.
The table for a picnic, depending on the functional, can have different sizes, but one item for all folding tables is common.
The legs, namely the folding part, should be shorter than its height, otherwise the table will not be able to work out.
It is impossible to get up legs on such tables, since the folding structures of the legs can withstand less weight than constant. Having made the table with your own hands, you can then decorate its tabletop with paints or with decoupage.
Procedure for making a table
Scheme of folding square table.
The acquired bar is required to cut into the size of the table, from it will be made legs and crossbars between them. It will take 4 identical segments for the legs and 4 identical crossbars that will fasten the legs between them below and upstairs. Also need a transverse bar, which will prevent the folding of the table and the breakdown of his legs.
Pair of legs lay parallel to each other on the table or on the workbench, according to the width of the table and the crossbar. Place two crossbars in the top of the legs and in the corners twist the design with screws. The diagonal of the rectangle, which turned out, should be equal - this will provide a stability table for picnic. After checking, the design is spinning firmly by adding metal corners. The second rack is created in the same way.
Article on the topic: how to choose and make tarpaulin curtains in the garage
Furniture loops made racks attached to the table top. The indents from the edges are made 3-5 cm. Then the picnic tape is attached to the picnic table. It is needed to fix the racks with respect to the tabletop. The tape on the countertop is fixed with screws, then putting the stand in the vertical position, cut off the tape on the optimal length. On the end of the ends, they are fixed with rivets and so that it was possible to disconnect at any time.
Picnic Folding Table
This design is pretty light, and therefore used in campaigns, in the garden and fishing. For the start of work, bars drink, with a prudent reserve of diameter. Cut this kind of materials very convenient on circular saw. For the table top you can choose any material, but preferably lacquered plywood or wood covered with several layers of varnish. The spiles should be closed with the edge ribbon, and the timber, harvested under the legs, is spinning with a jigsaw or grinding.
First of all, they start assembling legs and supports. The legs of the cross will be fixed with each other with a large bolt of a 3-3.5 cm long bolt. A marker or pencil markup for fastening is applied to the tabletop from the inside. Installation of all parts occurs with the help of wood screws. Details are numbered, and a preliminary assembly occurs, after which the design is again disassembled and all parts are lacquered. After a day, for which the lacquer should dry, you can deal with the final assembly.