Types and features of the installation of pendulum loops

Anonim

Swing sash, as a rule, open in some one side. This parameter is determined by the convenience, features of the dwelling and fire safety rules. However, there is such an option in which this factor is not necessary. Pendulum Bar Loop allows you to open the sash to any side.

Types and features of the installation of pendulum loops

Pendulum door

Features of pendulum doors

Thanks to the special structure of the fittings, the sash of this kind opens in one, so by the other side. For the other consumer, most consumers are known for cowboy films: the model was equipped with bars and bored. The same principle began to use in the equipment of industrial inputs and outputs, as well as evacuation corridors.

In the dwellings, the model appeared after the widespread style of the country. Especially spectacularly such a solution for the kitchen-dining room. In addition, this is a truly convenient way: with the simultaneous passage of two people through a double door, it doesn't matter which way people move - each door opens in the desired direction.

Types and features of the installation of pendulum loops

Pendulum door in the modern interior

Contrary to concerns, such a model has the same sound insulation and thermal insulation properties as any other swinging. The door leaf around the perimeter is equipped with a seal. So, despite the universality of the opening, when closing the sash tightly comes into contact with the frame and does not miss the cold and sounds.

Double-sided doors have a mass gain:

  • Excellent soundproofing qualities of sash, guaranteeing the convenience and absence of extraneous noise and odors;
  • The sash opens in any direction without the slightest effort;
  • The design of the bar loops implies high quality, because otherwise it is impossible to provide free movement of the sash, so that this option serves a long time;
  • An unusual and very aesthetic type of design is allowed in any force.
  • The lack of the product refers to the need for a large area: free space is required to open the sash in both directions.

Article on the topic: Autonomous solar lighting on the street, in the courtyard, in the country

Types and features of the installation of pendulum loops

Double glass doors

Design of pendulum loop

Such accessories are constructed somewhat differently than ordinary loops. It consists of 2 spring mechanisms installed on the overall basis. The presence of two devices and ensure the opening of the canvas in the same way.

Types and features of the installation of pendulum loops

Design of pendulum loop

Loops are used for installation on glass, wooden, metal sash. Moreover, pendulum loops for glass doors in design differ from accessories for wood sash.

  • The glass model is equipped with a classic option: 2 spring mechanisms for the overall base. The peculiarity of the product is a massiveness, since the weight of the glass is very large, so that the fittings in this case should differ in strength and reliability.
  • For the entirely performed from the glass, it is supposed to use a hidden breeder, otherwise the closure will be problematic. The breeder can be combined with bar loops or present a separate element.

Wooden flaps are installed much more often. Plus, they are aesthetics and less weight. Some minus represents the thickness of the sash - 30.40 mm, and even more. In its design, accessories for the door canvase are somewhat different. It also consists of 3 cards that are connected to each other using massive axes. In the photo - a model of wood.

Types and features of the installation of pendulum loops

Design of wooden pendulum doors

  • Pendulum loops for aluminum doors - mean aluminum frame with inserts of various kinds. This design has a smaller weight, but a large width - 40 mm and above. Pendulum hinges for sash are used standard, not reinforced. In this case, the most important is the correct installation on the aluminum product.

Types and features of the installation of pendulum loops

Installation of bar loops

Installation of this kind of fittings is not more difficult than the attachment of the usual, but it is worth considering some factors:

  • Pendulum loops for glass products are fixed directly on the wall, as the design involves the absence of a door frame. It is necessary to drill holes in the wall;
  • Between the flaps, the wall and the floor it is necessary to provide technical gaps: between the web and the wall it is 4-5 mm, between the sash and the floor - 11-13 mm;
  • It is recommended to equip such a model by the closer, especially glass, since with a sharp closure they can be damaged.

Article on the topic: Bar furniture: Features, Features, Designs and materials

Types and features of the installation of pendulum loops

By itself, installation and on wooden, and aluminum models are the same.

Read more