Laying walls from the effects of moisture and cold gradually collapses. In the room it becomes cold and damp. Save comfort in the house can be facade plaster for outdoor work. It is moisture-resistant, contributes to the preservation of heat, has a good parry permeability ratio. At the same time, a decorative wall decoration is created, with your own hands the image of the house.
Facade plaster
Beautiful wet facade finish
Excursions refer to cultural events. My friend and I traveled on a huge number of building stores and salons with a cognitive - shopping goal. Vadik decided to make a plaster facade in his house under construction, and he also own. We visited market markets, where they sell facade plaster from construction brands. Then visited branded salons:
- Ceresit;
- Bolix;
- An avo;
- Knauf.
Mineral facade plaster
All manufacturers have widespread the facade plaster for external work with various properties, dry and wet. By the main component - hardener, they share:
- acrylic;
- cement;
- silicate;
- silicone;
- mixed;
- Mineral.
A separate group identified decorative compositions for plastered facades. They apply instead of paint for wall decoration. They are distinguished by a textured surface and a variety of tones.
Under the use of plaster for the facade was divided into universal, and applied to certain surfaces. Vadik was interested in the facade plaster on the foam and for gas-silicate blocks. It is better to choose the brick or the KNAUF, in which the base is cement.
I like the facade plaster Bolls. It is universal, suitable for walls from gas-silicate blocks, falls on bricks and expanded polystyrene, but better when the glass tension is stretched. I apply it, making the repair of the facade and insulation. It is light, like mineral wool and flow to 1m2 less than in other solutions, thanks to additional components. Coloring occurs easily, especially if the acrylic finish.
Article on the topic: How to cut plastic baseboard for the floor: the choice of tools
Ceresit products are well known to builders
Facade finishing plaster
Plaster Cerezit is produced for cement facades, with the addition of lime, plaster and other components. To finish the walls with their own hands, Ceresit produces an acrylic and mineral mixture.
Vadik was interested in which plaster facade of the house is the most resistant against moisture and whether it produces its Ceresit. Silicate was created on the basis of liquid glass and lies on brick and masonry from gas-silicate blocks, if a grid is used. It is better to apply it with a thin layer. Plaster Cerezit Silicate is cheap, but has several drawbacks:
- fragile, collapsed when hit;
- does not let air, the wall inside is often wet;
- Coloring is complex, only separate types of paint are suitable;
- Large consumption per 1 m2, heavy;
- Sophisticated application technology.
Plaster facades
Decorative finish is possible if the fastest is used. Coloring only with special materials, after primer.
Silicone facade plaster Cerezit, as well as Knauff, flexible, plastic. Brick and gas-silicate blocks, application technology using fiberglass is better than in several thin layers when the grid is not used.
Elastic coating for silicone-based facades is used as a decorative structural and type of cored. Gives the original type of surface. The wet plaster will simplify the repair indoors, turning each meter of plastered walls into the factory pattern. The grid simplifies technology. Painting the surface in various tones through the time when repairs are made.
Stucco Knauf Untersputz - Funny Name, Great Quality
Facade plaster
Unique plaster Knauf - Untersputz UE210 is classified as cement. It has lime and polymer supplements. It's good to lie down the brick, polystyrene foam, surfaces from gas-silicate blocks and any other, if the fastener is used. Consumption per 1 m2 small, less than 17 kg of dry mix with a thickness of 10 mm layer. The square meter of the wall, if making shuttering of facades, costs cheaper than other KNAUF mixtures and the ceresit with a lower cost.
Article on the topic: Wall clock in the living room - 80 photos of the original ideas of design
When I make repairs and, I try to convince the client to choose Knauf - UNTERPUTC UP210, especially if the subsequent coloring of the surface is to be. Other types of materials when using the mesh give good coating, alignment technology and consumption differ little. But in the aggregate characteristics of Knauf - UNTERPUTC UE210 The best front-facade plaster for aerated concrete and brick.
In addition to Untersputz, KNAUF manufactures a large list of mixtures and a grid for cladding, including finishing glass. Cemer dry mixture of KNAUF has various applications, depending on additives.
| Cement-based KNAUF plasters | Purpose | Additives |
| Knauf-Grünband | Heat insulation facade | Hydrophobic, polystyrene foam in granules |
| Knauf-Untersputz | Facade | Lime, polymers |
| Knauf Zocelputz | Cocol | Lime, abrasive, ground stone |
| Severer | Plaster glue | Fibers, polymer additives |
| Adhesive | adhesion, spray water repellent | Lime, chemical adhesive supplements |
The consumption of the material on 1m2 depends on the additives and ranges from 8 kg when using the adhesive as a spray with a thickness of 5 mm. Severer leaves 1m2 from 3.5 kg.
Polish Bolix plant seeks leaders
Decorative plaster for house facades
Plastering facades begins with a question, which is better, and what to choose. Polish company Bolix argues that the facade plaster Coroed - Bolix MPKA 15DM. Advantages in the finish of their products:
- Easy to fall acrylic facade paint on the Bolix coating;
- the grid of cracks during freezing is not formed;
- It is possible to reusable painting when repairing and changing coloring;
- used as a structural;
- flow per 1m2 from 2.8 kg;
- cement and acrylic plastering can be the leveling basis;
- The firmware for the strength of the layer is not needed.
TECHNOLOGY Wet Bolix Plaster requires surface alignment, like other types of facade protection. A flexile glass pack and the leveling composition is stacked on bricks and aerated concrete blocks. You can use Cerezite. I do not think what is better, but I use UNTERPUTC with its increased adhesion and perfectly smooth surface. The consumption on the meter of the wall is about the same.
Article on the topic: Decor mirrors do it yourself
Become popular French products Easha prevents high price
Facade Finish House Plaster
The company is issued by a qualitative insulation. Silicone plaster for the facade, the compositions of Cerezite, Knauf well lies at him. If the grid is applied facing synthetic or fastener, then the avoor is easily covered by Bolix mixtures and mounted under ventilated systems. The consumption of materials for the insulation of the house on 1m2 is similar to Minvat.
The load on the meter of the Batamon Foundament The heater under the plaster The avoor gives lower than the various types of wool. Specific escape is less with higher strength. Repair of walls is not required for more than 20 years. Insulation technology is similar to other types of moisture-proof insulation. The consumption of glue and fasteners on the meter is the same.
Coroed and other types of decorative finishes
Stucco for finishing facade
When it is necessary to make quality repair of the facade for a long time, the decorative facade plaster of the croroede will help. His name acrylic and silicone plaster received for having different types of risks as a chaotic and directed grid of traces of a bug of a cored. Its flow on 1m2 depends on the thickness of the applied layer and the size of the grain of inclusions. Painting is made after the primer. Better paint - acrylic. Color through time easily changes. For smooth walls from gas-silicate blocks, the optimal option for finishing, when the original painting of the house is needed.