Want to decorate your household plot with an interesting man-made craft? Create a work of art on your own from the primary materials? Palma from plastic bottles - what you need, it will turn the territory into an amazing exotic garden and will delight the eyes for many years. Our master class is dedicated to how to make palm from plastic bottles with their own hands in stages from the used PET package.
If you have a desire and creative impulse, proceed to work.
Materials and tools
First of all, we define the number and quality of materials. What package is suitable for our craft? Of course, in every house there are plastic bottles used, but are all of them suitable for our work? Of course not. We choose strictly only brown and green bottles for trunk and crown. For a larger plastic beauty, a container of 2 liters will be best suited, a semi-trunk container will fit smaller.
We need:
- 15-20 brown bottles for a large tree trunk and 15-10 for small;
- 6-8 green bottles for creating a 1st palm leaf;
- Stationery knife or scissors;
- Metal rod or wooden cutter for fastening the trunk;
- Wire and rope;
- Scotch.
Below is a detailed instruction for making palm trees with diagrams and photos.
Getting to work
Algorithm of actions:
- Create crown trees;
- We make the trunk;
- We combine structural elements;
We proceed to creating leaves. To do this, take a bottle of green and, with the help of a stationery knife or scissors, cut off the bottom, as shown in the photo.
Then on the resulting workpiece, retreating from the throat 3-4 cm, do frequent longitudinal strips.
Note! The more often the stripes will go, the more fluffy our leaves are obtained.
In the same way, we cook another 5 blanks. Insert the resulting blanks on each other. In order to bind them with each other, we use a wire or rope: we have done it through the neck and fix it. The first sheet is ready.
Article on the topic: Crochet bunny in sundress
We bring to your attention a second way to manufacture palm branches. To do this, we take a green bottle, with the help of a stationery knife we remove the bottom. We visually divide the bottle into four parts, cut. It turns out the billet, as shown in the photo below:
Then decorate the resulting sheets, for this, on the perimeter of the leaves, we make sharp cloves, weighed the resulting fluffy leaves outwards, fix.
Repeating paragraphs 1-3, we prepare the remaining parts of the crown. We remind you that for one palm it takes at least 6-7 leaves.
The procedure for the creation of leaves can be submitted schematically:
Establish to the manufacture of the trunk. As we know, in nature the trunk of palm trees is covered with scales. So that our exotic plastic beauty is as much as possible to natural analogue, we will try to recreate natural relief of its foundation. This will require almost the entire brown bottle.
Corrently cut off the bottom.
Cut the bottle of 6 equal scales. It turns out such a wonderful chamomile.
Create similar chamomile for two palm trees. We collect them together and fasten the same as the leaves. Stems are ready.
The number of billets depends on what the height of the trees are you going to do.
The resulting foundations should keep the crown tightly, for this it is necessary to strengthen them with the help of fittings or a wooden cutter as shown in the diagram.
Fast assembly
Now that all structural elements are ready, proceed to the assembly. There are several layout options for finished elements. Let's focus on easier. Cooking the stem top, cut off the throat from the brown bottle. Almost at the bottom we make several cruciform cuts. Here we will insert our crown. A more clearly assembly process is presented in the schemes below.
Important! For the resulting masterpieces, it is necessary to make a foundation so that they keep well in the ground and did not swing.
If you have the opportunity, you can prepare a welded structure for subsequent concrete.
Article on the topic: Sweater with deer knitting needles for girls with photos
What wonderful and unique trees we turned out, therefore, you can create a whole exotic evergreen alley in your garden on the envy of the neighbors. Factory and create interesting crafts for your site, attract to work and children.
Connect the fantasy and decorate your tropical beauties using multicolored bottles of smaller diameter: add palm trees in the form of bananas and coconuts.
Pay attention to the creations of your colleagues, take note and use your work on your work techniques and elements. Some work options are presented in the photo below:
Video on the topic
We offer to consider video lessons from experienced craftsmen: