In the technique of Macrame, you can weigh anything. For example, decorations. Bracelets look great. They can be from threads, with beads and even with semi-precious stones. Making bracelets Macrame for beginners - an excellent way to get acquainted with this style.
What is the technique of bracelets Macrame with their own hands in the manufacture? It will be better to understand this, considering the master class on weaving the bracelet.
Working with stone
In this master class, the Kabochon stone is used, the polyester thread of two different colors and 8 beads of 8 mm diameter. We will also need: shoe needle, lighter and scissors.
Colors of threads need to be chosen, focusing on the stone. It will be good if one thread is in the color of the stone, and the other is some kind of contrast.
First you need to leave a stone.
Now you need to cut 18 brown and 2 blue threads of 120 cm.
4 brown while postponing. Blue threads to hide in a needle. Take a stone so that the ends of the braid are on the right. Find the middle of the stone and cover the blue thread right under the threads of the braid.
Align the thread - both ends should be the same. It turns out 2 blue threads of 60 cm. Take a brown thread, retreat on a braid from a blue one thread, to do under two adjacent and align. Now there are 4 threads.
It turns out 2 threads of blue in the center and 16 brown. They are absolutely symmetrically located if there was a pass, it means that it is wrong.
Impose a blank to any object and start weave. For example, convenient on foot.
If you bind to your leg, it is necessary to do this in a special way so as not to press the arteries.
Take one of the 4 pending threads, lay out horizontally. Now this thread is the basis, and hanging from the pebble - workers. In the diagram below, the main thread is marked with a dotted line. Start weave from the center to the right, using the reps' left nodes. Take the right blue thread into the right hand and tie around the base.
Article on the topic: Christmas tree from burlap
The basis must be well stretched when tying a node. Conduct a working thread under the basis, to top above the base and from top to bottom to go to the resulting loop.
Tensioning the main thread with your left hand, tighten the nodules with the right. The same thread make the second knot to the right and tighten, as it should.
It turns out the left reps node. Left because its manufacture on the left begins. The reps node consists of 2 nodules always. Blue back and take the next right for her brown. Tie the left reps nodules around the same foundation.
Threads should be pressed towards each other. The nodules should be similar to bispers. So weave to the edge, left to right.
Then weave the right left. To do this, apply the right repition nodes. Here are weaving schemes.
Also weave to the end.
Blank and deploy the other side. Just like before, weave from the center to the edges. Then untie and turn 90 degrees, a short side of the stone down. Tie the threads of both rows is 2 basics. The right will be the basis, and the left working thread. Now knit the right node. Also with the ends on the other side.
Now the workpiece must be tied horizontally. Take the thread cut before and do everything just like the first next. On the other hand, repeat and weigh together the tips of the foundation. It will be as if corners from a stone eye.
Now weave the third row. It is somewhat different. Now the basis will be the extreme right thread. To pull it left to the left horizontally and shame alternately threads, starting with the second. Use right repition nodes.
Reaching the center needs to be stopped. The last knot make the blue thread. Now weave left to right. The basis is taken to be an extreme left thread and woves to the center. Tie the basics with the right node.
Article on the topic: Cross embroidery scheme: "Billets of Ukrainian embroidered" free download
The fourth row is the twin third.
This is an exhaust.
In the fifth row used beads. Wood one on the last thread of the left row.
Specify the fourth thread from the edge of the right row - it will become a working. The weaving method changes. Now there is one working thread and it will be placed around the basics. Work comes from the edge to the center. To begin with, the left node shake the blue thread, then brown.
Change the direction, move from the center to the edge. The right node shape brown, then the blue thread.
Secure a bead. Tie threads at number 1 in the photo. Thread with beads with a left nodel.
Weave a row on the right, wept all the threads with left nodes.
Sell all the threads that are free and stop in front of the center.
Wear a bead on the working thread and tie a thread at number 4.
The same to do the left, put on the third bead and fix.
Now wean a row by type of third, taking the first thread of a number as the basis, and the workers will be all the others.
Connect threads with the right node in the center.
From now on, begin to reduce the ranks. We will determine the next row as well by taking as the basis of the second thread.
This series is also starting with the second thread. So we will weave several rows until the thread of the blue color is from the edge. Now the blue will become the basis, and others are workers. Weave from the edge to the middle.
In the center of weighing the thread with the right node. Further weave the same and nothing to cut. On the other side of the bracelet to do the same. Touch it on hand. When the distance between the tips is 3.5-4 cm, it's time to narrow weaving.
Leave threads from the edge until 4 thread remains.
Divide 4 threads into 3 parts: 1 thread, 1 thread and 2 threads. Weave the usual pigtail.
Article on the topic: Summer bag with your own hands with round bamboo handles
Weave it about 10 cm and tie a node.
Wear a bead. If all threads do not break, turn one or two.
To tie a knot.
It is necessary to get tips. Cut extra threads, leaving 3-4 mm.
Fight from the wrong side! First light and then brought.
The thread is melted and will turn into a black ball, it must be pressed to weaving, tightly, as if gluing.
You can use thimble in order not to burn. All excess threads cut off and fry.
The strings also need to be buried.
Do not overcome only polyester on fire, otherwise it will start dripping.
You can leave so or make a sliding castle from a brown thread.
No need to tighten tightly, otherwise the lock will not be able to slide along the ties.
5-6 nodes will be enough. Then you need to burn ends.
Here is such a beautiful bracelet turns out.
Video on the topic
Here are filmed video footage on the topic.