Crafts from plastic bottles are distinguished by their versatility: they can be decorated with both the home interior and a garden plot or a playground. In the manufacturing technology, they practically do not differ: the garden products simply need to be coated with waterproof species, and also not to use paper or cardboard in their design, which can be frowning under the rain. Plastic products are durable and practically not subject to external factors, so ideally suited to decorate summer cottages and flower. Below is a master class on the manufacture of owls from a plastic bottle. This instruction leaves space for imagination, the bird can be executed in several versions that differ in its complexity, so such a workout is suitable even to children.
Step-by-step creation
For the manufacture of owls, it will be necessary:
- Bottle of any volume. You need to choose a bottle of a certain form - for owls are more suitable "fitted", which are slightly narrowed in the middle. Of them it will be easier to form a bird torso;
- Scissors or stationery knife;
- Scotch or construction stapler;
- Paints and brushes.
From the bottle, cut off the two parts. The first - bottom and lower part of the bottle before the place in which it begins to narrow. If you flip it upside down, it will be similar to the head of owls with ears. The second is part of the bottle between the neck and the label, that is, another expanding part. Sorry from the bottle should be cut off. The resulting item will have holes on both sides, in a wider you need to insert the first blank - the head of the owl.
The product will look careful if the parts of the bottle are cut in such a way that the connection turns out a smooth transition from one component to another. If this effect failed to achieve, you can align the joint using a stapler or tape. It is important to use them from the inside of the crafts so that they are invisible after its staining.
If it is assumed that the owl will be used to decorate the house, it is necessary to end the unique hole in the product for stability.
Article on the topic: Clock dials for decoupage
The next stage is the painting of owls. To comply with the proportions, it is recommended to draw eyes with a diameter of about a third of the entire height of the product. Use better acrylic paints - they are better suited for plastic coating. The paint should be applied in several layers, so that the insides of the owls are not transformed through it, for example, used to bonded tape.
In the event that the owl was created for the house, the product is ready. But if the craft is planned to be installed in the garden, several more improvements are needed.
- To attach owls on the tree: At the bottom of the owl, you can make a couple of holes, through which to turn the rope. It can be born owls to any branch of the tree, disguising the hole in the product;
- For fastening on Earth: so that the owl does not take the wind, any heavy filler can be poured into it, for example, sand or stones. At the same time, even the ducklive owl is recommended to fix in one place - for example, to lay pebbles or slightly dug into the ground.
Decorations for owl
A common way to decorate sides from a plastic bottle - hats. One of the most appropriate image of the wise bird is a professorial hat, which is made from another bottle and plywood.
To do this, cut off a smooth part of the bottle, glue the square piece of plywood on the resulting cylinder and paint the resulting headdress into black. Then the hat is glued onto the head of the owl, if it seems that it keeps unreliable, in the head of the owl you can make a few slots in which the edges of the cap should be inserted.
Another way to decorate owls - professorsk glasses. They are made from unnecessary CDs that glit to the eyes of a bird with a mirror side.
It is worth noting that such a decoration is suitable only for products from large bottles, such as five-liter.
However, if desired, you can cut circles suitable for decoration and smaller products. WID eyes can be decorated with all sorts of methods: pupils from unnecessary buttons or beads, glued eyelashes, which are cut from the remaining unnecessary parts of the bottle are well. In addition, to decorate owls to it, it is possible to glue the bulk beak, also cut from plastic residues. If the owl is desired, it is possible to give an additional volume by gluing feathers on it. They are easy to cut from the same bottles, you can use one-time plastic spoons.
Article on the topic: Children's masks do it yourself
When they are joining, it is important to comply with the order and move from the lower rows to the top so that they overlap the joints. Feathers can be issued the whole owl or only its wings. With this design, it is important to remember that the product with a lot of parts is harder to paint, without leaving the transparent parts of the plastic, so if the owls make children, you can paint all the feathers and the body of the owl separately, and then collect already tinted parts.