Sooner or later, many have to change interior doors. For those who do this for the first time, is a difficult task. Therefore, in order not to have any difficulties, especially with the installation of the handles, you should deal with the nuances that may occur when this work is performed.
Before the handle is installed in the door leaf, it is necessary to study the possible designs, as it is important. The standard model consists of the following elements: handle, rings, socket, rod, limiter, stoppers, tongue, lock mechanism and box.
If the interior doors are hollow, then a coupling screw will be needed in opposite parties to fix the entire system.
Types of handles
A very important point from which the installation of the latch knob will be dependent on interior doors - which is used. Therefore, the existing types of handles should be considered:
- Pressure. To open, produce pressure on the handle. The latch is released, then becomes in place.
- Nobies Round construction with a latch and a keyhole. Frequently used for the bathroom. The disadvantage - quickly deteriorates if it is done poorly.
- On the outlet. Installing such a device does not need a large hole, for the decor is equipped with a socket overlay.
It is worth noting that the ballpoint handle differs in the type of fastening to the canvas, so options are possible: autonomous (self-drawing) or a screed - more reliable.
In the first case, the ball model is convenient when design is required on one side of the door leaf or installation to different heights.
You can combine such models with valves, which will allow closing the canvas. It should be noted that the ball latch is continuing, only a small effort will be required for the opening.
Installation of latch on interroom doors
To insert standard handles into interroom doors, no special skills are required. The main thing is to have a pencil, the carbon line, drill. First make a markup to determine the height to which the handle is installed is usually 80-100 cm.
Article on the topic: how to remove the test meters of the NEVA 324
Consider the rules in detail how the setting of the latch handle on the interior doors, which is carried out by Apex:
- Apply the design to one of the sides of the web and is used as stencil. The same is done on the other. It is worth noting the center where the handle will be located.
- You should mark where the tongue will be. Make a deepening for it with the help of a first or twisted drill. It is important that it is part of the material of the door of the door perpendicularly to subsequently the latch fit tightly to the door.
- By inserting the lining to the resulting recess, it is located vertically and rub the pencil.
- Remove and remove the material layer, to the depth of the lining, by marks.
- Make a through hole for a handle using a drill;
- The latch is inserted into place. Check how the lock is closed, fastened with self-draws.
- The pad is fixed by fasteners. After that, the rod is inserted to which the handle is dressed with a ring and a socket. Screen with self-drawers, pulling the pins.
After that, the installation of the shut-off strip on the door jammer is carried out. This process should be held in a specific sequence:
- Covering the web, on the door frame mark, where the latch ends, or the sticking tongue will be driven.
- Opening the cloth, the lines on the inner surface of the frame should be continued.
- After checking the line on the coincidence, apply a shut-off bar to the markup, the holes are reduced.
- Cut from the depth: for the latch and for the thickness of the plank, so that they deepen in the frame of the door jamb.
- Having done these actions, the bar is applied and fastened with fasteners.
How to install a handle-latch on the interior doors, you can look at the video.
Installation of latch on plastic doors
Metal-plastic doors are often used both input and interroom, but, despite the purpose of the room, where installation will occur, such a product should be equipped with special accessories, which will increase the protective properties of the structure. Therefore, you should know that the plastic door is equipped with locks, characterized by the number of locking points and on the basis of the features of operation:
- Single-headed. The design may include: a latch for inactive use or a roller - in the door with frequent use.
- Electromagnetic. Adjust the frequent opening is usually used if a canvas with intercom. The installation of magnetic elements occurs in the corners of the canvas. It is important to focus on such a parameter as residual magnetization - should not be strong, since in the reverse case, the plastic door may be damaged.
- Electromechanical. Design with a narrow profile, which is convenient for the insert. For infrequently open doors.
Article on the topic: Metal door lining
- Multiple. A reliable device with which the canvas fits tightly to the door frame. There are blurred and rampant, using latch for closing.
You should know that you should choose a model - half the way, you need to properly passed the installation of the latch on the plastic door. Therefore, you should know the features. If there was already a lock, then in this case, it is not necessary to make a dismantling of an old structure, then choose the appropriate and put it. If never happened, it is better that the installation is carried out by the apex company, whose specialists have the necessary tools and skills.
Montage for balcony doors
It is worth noting that when the installation of the latch on the balcony door occurs, that is, the nuances in the design and principle of operation.
Consider in detail the types of the castle with a latch that can be equipped with a balcony plastic door:
- Roller. Installation in the door ends. The roller is supported by the spring when the cloth closes, it enters the groove.
- Magnetic. Fastened with a magnet. There is a cloth position lock, which is convenient when leaving the balcony.
- Fale. A swivel handle is attached to the system.
It should be known that in the course of operation, the balcony door can be asked, so the latch requires periodic adjustment so that the junk entered into the grooves smoothly. If magnetic structures are used, they work without sounds. Before replacing the device, it is worth lubricating and adjusting the lock, since in some cases it happens enough, and then start up to the fundamental action.
Mechanical latches are reliable, but better if the balcony door will have magnetic latches. Consider the features of their use:
- Silent;
- Durability, since the elements of the mechanism do not interact with each other;
- The canvas is always closed, as the latch itself is attracted.
Magnetic latches are overhead and embedded. In order for the installation of magnetic latches to the door was made independently, you can see the photos on which all stages are shown.
Article on the topic: How to make a blind area around the house with your own hands: a device concrete, soft, video
On the choice of accessories for the door canvase should not save, as besides the fact that it must harmoniously fit into the interior of the room, and perform the functions of opening and closing qualitatively.