The development of high technologies does not stand still and comes even to the area of needlework. In this case, we are talking about such an interesting device as a plotter for the Skrapbooking.
The device itself is not a large printer that is capable of cutting the desired figures according to a given program. For SkrapBuking, it will be enough if the ornament or shapes will fit on the sheet of A4 format.
Plotter for Skrapbooking is equipped with several types of knives, which differ from each other long cutting part for paper of different thickness. A program that provides what needs to be cut out the figures can be installed on a computer or flash drive.
In this case, for example, an illustrator program is used, in which the figures needed for scrapbooking should be drawn. It should be borne in mind that if necessary, you can simply download the desired drawings, but then you will need to register your device on the relevant site.
The work begins with connecting the plotter to power on one side and to a computer on another to which the USB connector is used.
Now it is necessary to properly install a sheet of paper so that it does not move while cutting the figure with a knife. For these purposes in the plotter there is a substrate that has a film with a sticky surface. On this surface should be glued with a sheet of paper on which the ornament or the necessary figures will be cut.
Then such a sandwich is installed on a plotter substrate, focusing on special tags. After turning on the device, pressing the corresponding button, will start the cutting process.
The program on the computer will display the processed actions, for which you should first view whether the necessary ornament fit into the Format Format. After that, you can press the seal to print button in the program.
To whom it is interesting to observe the process, the plotter lid can be left open and observe the actions of the knife. The knife will circle the contours that were specified in advance by the program.
Article on the topic: how to sew men's family pants for half an hour
Upon completion of the knife, click the start button so that the plotter gives the paper.
Now you have paper with cut-out circuits for scrapbooking. On our side, it remains only to carefully separate each figure and use it in their works.
To repeat the steps for other figures on the substrate paste the next sheet of paper and the sandwich is recovered again into the plotter.
These are what figures from us turned out in this case, except for the framework of various sizes, a lot of amazing things.
For example, the plotter will ideally cut the letters specified in the font and size. What was also done in this master class.
Please note that use for the plotter paper is not necessarily monophonic, it can have a different pattern or ornament, if necessary for your further work.
Such a plotter has the ability not only to cut, but also print the desired images, on the contours of which can then be carried out and cutting. This function is used to make various boxes, bulk paper toys, volume postcards, etc.
Plotter for Skrapbooking can also create original special effects that can be used for magnets, stickers, etc.
In general, the printer for Skrapbooking can be useful for those who constantly conduct master classes to prepare certain blanks.
Plotter will help and those who make albums, postcards, envelopes for money to order, as well as other crafts. Such equipment will save a lot of time that can be spent on creative thoughts.