Weaving from rubber bracelets for beginners on the machine and on slingshot

For those who decided to try weaving from rubber, bracelets for beginners are best suited. Rubber weaving will be able to become an excellent new hobby, and especially like small needlewomen. Starting with the development of a simple weaving scheme of a thin multicolored bracelet. Once the principle of weaving becomes clear and wants something interesting and original, you can begin to study more complex methods of weaving bracelets from rubber.

Simple option

Before starting to master the technique of weaving bracelets, it is worth saying that we can weave on the machine, slingshot, fork or fingers. The machine is professional and children depending on the size and functional features. Like a special slingshot, it can be purchased in a store for creativity with a set of rubber and fasteners. The usual dining force is found in every home. Bracelets made on the fork are not different from those made on special equipment.

So, for beginnings, simple bracelets should be mastered, namely understand the basic principle of weaving using the machine. For this, you will need the following materials and tools:

• machine;
• Multicolored gum;
• hook;
• C-shaped fastener.

How to weave:

1. Install the machine so that the columns look into the opposite side from the wizard (it will be more convenient to wear elastic bands);

1. Put on the gum of any color diagonally on two columns;

1. From above relative to the first gum diagonally put on a gum of another color, so that the letter "V" (as in the photo) is obtained;

1. Changing the direction to the right and left, put on the gum of different colors on the principle of 2-3 points;

1. Turn over the machine to watch the columns on the masters;

1. Remove with the help of a hook with extreme gum and cross it diagonally on the adjacent column, as shown in the photo;

1. Repeat item 7 throughout the machine;

Article on the topic: How to sew home slippers with your own hands: Pattern and master class on sewing

1. Install a fastener on extreme rubber band;

1. Carefully remove the bracelet and connect the ends.

All, the first simple bracelet is ready!

With the help of the machine, you can do both narrow and wide bracelets. It all depends on the initial number of gum, clothed to the columns, as well as execution technologies that are not difficult to understand photos or video.

French braid

A more complex and interesting weaving resembles a canvas or mail. To master this method of weaving, you can try to make the bracelet "Scales of the Dragon". To clearly understand how to weave such a bracelet, it is recommended to watch a video lesson below:

The original two-color bracelet "French Spit" can be made on slingshot. To do this, prepare:

• Special slingshot for weaving;
• hook;
• gum two colors;
• S-shaped clasp.

Progress:

1. Put on the eight of the eight of the slingshot;

1. Top to wear 2 gum (not twist);

1. Pry the lowest loop with a crochet and cross it in the middle;

1. Repeat item 3 on the other side;

1. Wood on top 1 gum and repeat 3-4 points;

1. Repeating 2-5 points until the desired bracelet length will be achieved;

1. Remove the resulting harness with a slingshot with a hook, picing down the lower loops, as when weaving;

1. To go to the loop a gum of another color and put on a slingshot;

1. Top on the horns put on another gum, pull out the extreme loops and cross in the middle;

1. Repeat item 9 until the first harness is fully worn;

1. Remove the bracelet and connect the ends using the fastener.

Ready!

Fish tail

If there is no machine and slingshots, you can try to weigh the bracelet "Fish Tail" on forks. It turns out quite dense and wide.

To do this, you will need:

• 2 table forks;
• Scotch;
• Multicolored gum (you can take 5 colors);
• Plastic clasp in the form of the letter "S" (4 pcs.).

Before weaving, it is necessary to prepare a "machine" from the forks: folded together two forks so that the teeth are sticking out in different directions, and consolidate them with a tape or gum.

Article article: Superhero Mask do it yourself

How to weave:

1. Put on the teeth of the gum of the same color, by overloading them "eight";

1. To put on an elastic band for all four tooth of one fork (connecting rubber band);

1. Pack over the teeth of the elastic bands of another color, as in paragraph 1, but without twisting the "eight";

1. Repeat item 2-3;

1. Package the lowest (first) connecting gum in the middle;

1. Alternately from each teeth to move the loops in the middle of both sides;

1. Repeat items 2-6, periodically by changing the color until the bracelet is obtained;

1. Connect extreme loops by four fasteners.

Ready!

If something remains incomprehensible, you can watch the video:

Beautiful bracelets are obtained with woven beads. They are also made using forks.

It is necessary to prepare a hook, beads, a fastener, gum (better than two colors) and glued together forks. Then make the workpiece: through each bead with the help of a hook to rub the gum of one color.

Further instruction of weaving for visibility is presented in photos.

Also bracelets of any complexity weave without machine or other devices. All weaving is made on the fingers. In this way, you can weave, for example, on the road, when it is not possible to take a machine with you.

Video on the topic

In order not to remain questions, as well as to learn how to make large and original bracelets, it is best to see the process of weaving on video.