Residents of cities are sooner or later faced with the question: how and where to dry the underwear. For most, the ceiling dryer for linen becomes a decent output.
And if the solution to the issue seems simple and obvious, then the process of choosing the mechanism of the dryer and installation technology has some nuances. So, what to think about how to buy and install the ceiling dryer.
Choose a dryer
Wall dryer with telescopic mechanism
Relieve ropes stretched throughout the apartment have long passed into the past. Modern shopping stores are offered to choose from various laundry drying devices. Among them:
- Outdoor folding dryers;
- Wall dryers with a telescopic mechanism;
- Ceiling systems for liana suction systems.
In the table below, consider the main advantages and disadvantages of the dryer of each type.
Before embarking on the installation of liana dryer, it is necessary to thoroughly approach the selection of space for its installation, and on the basis of it - to buy the mechanism of the necessary dimensions.
It is precisely because the ratio of advantages and disadvantages of drying lilators is best, the installation of this ceiling dryer in urban apartments is an urgent topic to date.
How to choose the right place to install
The balcony is perfect for setting the dryer
It is necessary to determine the room in which the drying of the linen is planned before purchasing Liana. In essence, ceiling dryers are simple designs of brackets through which several ropes pass. The main brackets are attached to the ceiling, the height level control system is mounted on the wall side.
When choosing a place of installation, the following points should be taken into account:
- The room should be well ventilated;
- In the lowered rope, do not interfere with the opening of windows and doors;
- It is worth avoiding the installation of drying for linen on the suspended ceiling or the surface of GCL.
Article on the topic: LED tape for lighting aquarium
Practice shows that the most convenient place for drying linen, suitable in all parameters is a loggia or balcony.
After the place is selected, decide on the length of the mechanism, given the specifics of opening all windows and doors. Lianas are sold different lengths from 50 cm to 2 m. The dryer is usually included:
- cords;
- 5 tubes of the specified length (plastic, galvanized or painted metal);
- 2 brackets installed on the ceiling;
- Clabo, fastening on the wall for fixing the level of rope height.
Liana on the balcony is mounted for a long time, so thoroughly approach the quality of the purchased goods. It is worth the drying of Russian or European production.
Assembly and installation diagram
After buying a drying, you must read the installation instructions attached to the goods. It will be painted, how to collect and how to install the ceiling dryer correctly. To do this, you will need several special tools:
- The stepladder for ease of work in the ceiling area. In standard apartments, sometimes you can do a steady stool.
- To attach brackets in the ceiling, you must drill holes for the screws or anchors.
- For markings, prepare a marker or pencil with a tape measure, a length of more than 2 meters.
- Dowel and fasteners of the required size.
- A screwdriver or screwdriver for fixing the screws.
Check out the typical step-by-step instruction, how to hang the ceiling dryer. Before you start collecting, check the completeness, as well as prepare the necessary tools.
- Brackets apply to the ceiling and marker We mark the place of deploying. The distance between the brackets should be equal to the length of the tubes with an accuracy of up to 70 mm;
- We drill holes in the planned places and insert a dowel. Apply to the ceiling with scored dowels bracket and fix the self-drawing. (If decorative linings come in complete, then we close screwing screws);
- In the direction of tightening the rope on the wall, secure a bracket for fixing the height of the suspension. The bracket is better to fix at the level bent in the elbow of the owner of the house;
- Secure roller locks on brackets. Through the clips of the far bracket we skip cords. On the long end of the cord (bottom) we put on the rod. And we skip both ends through the Middle Bracket Roller;
- Ends fix together in caps, to adjust the height level of the rod. Drying Dryer Mount View in this video:
Depending on the manufacturer, the steps may differ, but not significantly. In any case, before performing work, it is advisable to check the completeness and meaning with the instructions.
Several ordinary tips
Before installing a dryer for linen on a balcony, a loggia or a storage room, read several simple installation and operation tips.
- Laian's laundry dryer withstands a large load, but do not hang on one cord more than 2.5 kg of wet linen. In this case, the ceiling dryer will last much longer, and you will not need to repair and understand how to repair Liana.
- When choosing a self-tapping screws to attach brackets to the ceiling, give preference to the products of greater length so that with a large load fastener it does not break out.
- The installed and assembled ceiling dryer for linen is absolutely not covered. But when it is used, to increase the "drying" coefficient, the tubes should be located cascader. Therefore, before hanging Lian on the balcony, make sure that the clothes on the ropes will be able to be calmly located, do not assign interior items. For details on the assembly and installation of the dryer, see this video:
Article on the topic: how to make the threshold of the entrance door in the apartment on your own
In the central and northern regions of the country, when solving the question, how to choose the right to choose dryers, it is important to remember that due to low winter temperatures, it should not be installed products like liana on non-beam balconies.