The bed is a very important element of any room, be it a bedroom of adults or children.
A large comfortable bed in your bedroom is a guarantee of strong sleep and good mood for a whole day. Prices for such beds are rather not small, but sometimes unthinkable, and even this cost does not always include a double mattress.
And, as is known the basis of any bed is a mattress, but only then the frame and his designer species. It follows from this that by purchasing a good mattress, the framework can be simply made with your own hands and taste, that's how you can make a bed from the glued bar on your own and will be discussed in this article.
The glued bar is quite popular material for different types of construction in recent years. It is usually made from wood coniferous breeds - larch, cedar, pine or spruce, environmentally friendly and perfectly smooth and smooth, sufficiently opened with impregnation or varnish.
The design is pretty simple, for such a bed, you will need three vehicles with a long 2.5 m size of 20x20 cm and two vehicles are the same length of 10x20 cm in size, 2x10 board for transverse lag. Bar 10x20 cm Use for the front aircraft, 20x20 cm for the rear chart and two side parts.
The legs are made square shape 20x20 cm. Connecting washed in the bars are made to a depth of 1/3 of the depth of the bar. The distance from the end washed the rear aircraft 10 cm, the front 5 cm, the side parts of 10 cm.
The depth and height of the laying of the mattress can be adjusted by the longitudinal bars of 5x5 cm which are screwed to the side parts for transverse lags.
With the right and accurate calculation of the marks and of course, with their high-quality execution, such a frame is quite simple to collect. The legs are screwed through the legs, and the imposed details on each other can be additionally not fixed their weight and the correctness of the marbles reliably hold the entire frame.
Article on the topic: How to connect the kitchen and living room together?
Conduct the surface by any impregnation or varnishes intended for wood.
For strength and reliability in the middle of frame transverse lags, you need to install a longitudinal bar with the sheath.
As you can see this option, the assembly of such a bed is not very difficult, it is enough to buy a glued bar of the appropriate sizes and properly cut the coupling.