Rotband Plaster Consumption Calculator on 1m2

Anonim

Wall shockting is the easiest way that is used for finishing works. Sometimes the plastering sand mixture can serve as a decorating coating, but, as a rule, it is used as a base under wallpaper or tile. As a rule, cement or lime is used to prepare the mixture.

Rotband Plaster Consumption Calculator on 1m2

Plaster Rotband

In addition to traditional materials, there is a wide variety of masses, such as Rotband. The dry solution of the Rotband helps to align the defects of the wall, give the surface of a special design, is also used for the Venetian wall decoration and under the application of water-emulsion paint.

Advantages of the Rotband solution

Rotband Plaster Consumption Calculator on 1m2

Plaster Knauf Rotband.

Dry Rotband solution is the most popular and high-quality material. Compared to the cement mass, it is distinguished by its non-presidency and high level of adhesion, because the mixture is plaster, the addition of the polymer and a light filler.

The Rotband is more often used to cover the walls and the ceiling under the application of water-level paint or pasting with wallpaper in rooms with a normal level of humidity.

In contrast to cement, Rotband, like any other mixture based on gypsum, has excellent quality - the use of water-free or acrylic paint helps to give the surface with a wonderful texture and design. The materials are perfectly suitable for paint, both on the water-emulsion and acrylic basis, but on top of the paint it is better to apply a lacquer coating to impart a shine, strength and durability of the surface.

The advantages of a dry mix are considered:

  1. the versatility of the mixture when creating decorative elements during restoration work;
  2. Rotband plaster consumption is much less than the consumption of familiar compositions;
  3. The mixture is characterized by a high level of moisture absorption;
  4. This material allows for 1 approach to apply a layer to 5 cm;
  5. The solution can be applied to the walls of several layers;
  6. Unlike cement, the composition of the rothband is environmentally friendly, and the solution supports the most appropriate microclimate indoor;
  7. has a high level of refractory;
  8. Ease of use - both newcomers and experienced masters will understand with the technology of cooking and applying;
  9. The mass does not need to be putty and is designed for the application of water-level paint;
  10. The stucco will dry quickly;
  11. With it, it turns out an excellent decorative surface of the wall.

Article on the topic: Decorating decoration with decorative stone and wallpaper Photo: wallpaper for stone, bricks, video

Technical features of the mixture

Rotband Plaster Consumption Calculator on 1m2

Rotband for wall decoration

The composition of gypsum plaster is characterized by such characteristics:

  • The layer of the applied solution can be from 5 to 50 mm;
  • The consumption of plaster plaster is about 8 kg per 1 square meter;
  • The size of the fractions of the material is ≈ 1.2 mm;
  • From 100 kg of dry matter, the output rate of the finished solution is 120l;
  • The density of the material is 950kg per meter cubic;
  • The life cycle of the finished mass is 20-25min.;
  • The drying process takes about 7 days;
  • The material is available in packaging from 5 to 30 kg.

Rotband Plaster Consumption Calculator on 1m2

Construction Plaster Knauf Rotband

Comparative characteristics of plasterers of prospectors, heat, volat and vetonite

IndicatorName
StudentsHeatVolmaWetoniteRotband
Consumption of plaster10kg / m2.4 kg / m28-9 kg / m21.2-1.4 kg / m28-8.5 kg / m2
Duration of drying7 days5-7 days4-8 days24 hours7 days
Layer thickness5-50mm5-30mmup to 60 mm30-50mm5-50mm
Price category85 $ / 30kg9 $ / 30kg8-9 $ / 30kg12.5 $ / 30kgfrom 5 $ / 30kg

Rotband Plaster Consumption Calculator on 1m2

Stucco Rotband.

The heat is a fairly expensive material, but its price is justified due to a long life cycle and thermal insulation characteristics. Also on the market you can see the gray hair, which will cost much cheaper analogues - about $ 5 / 30kg.

Hypan plaster of the VOLMA - popular material of domestic production. In the composition of dry mixtures of the volatile, mineral and chemical elements are present, as well as light binders. They provide an optimal drying time, ease of drawing and a wonderful result. After the gypsum coverage of the waves lighten to the walls, rather than Rotband.

The company is a car in the construction market presents dry mixes, among which there are moisture-resistant and lightweight masses based on cement. Mixtures are used both for external and exterior wall decoration, as well as for Venetian plaster. As can be seen from the table, the winds, though the most expensive, but quick-drying material on which you can also save due to its small consumption per 1 m2.

Article on the topic: Staircase for a concrete porch: how to make a formwork and pour concrete?

How to calculate the consumption of plaster on 1m2?

Rotband Plaster Consumption Calculator on 1m2

Cooking Plastering Mix Rotband

Before starting to the process of plastering, you will need to find out which financial costs are coming and how much mixture will be required. To do this, it is necessary to determine the consumption of plaster on 1 square meter.

If you decide to use the services of the wizard, the consumption of plaster does not prevent, because so you can follow the spreads of your finance.

Rotband Plaster Consumption Calculator on 1m2

Stucco Knauf Rotband for wall decoration

Consider the cost calculator on a specific sample.

  • The first thing to be done is to decide how the thickness will be a layer of mass caused by the walls.
  • After that, considering the manufacturer's council, which is indicated on the bag, which is spent on the quadrature at 1 meter 8.5kg of the solution, we use the calculator: 8.5 * on the thickness of the layer = 25.5kg - the costs of plaster on the square meter.
  • To find out the cost of rotband plastering plaster on a 10 m2 room, you need: 10m2 * 25,5kg = 255kg
  • Since the mixture is mostly sold 30 kg in the package, you can find out how many bags will need. To do this, we take a calculator and 255kg / 30kg = 8,5pc. This means that for plastering of the walls in 10m2, you will need 8.5 bags of Rothband.

Please note that the consumption of plaster always turns out more than the calculator shows, so it is worth rounding the data obtained and purchase 9 packages of the material.

Rotband Plaster Consumption Calculator on 1m2

Wall Decoration Rotband Stucco

First of all, you want to warn you that the calculator of the cost of plaster on the meter square wall can not be absolutely accurate, because each is designed for a separate brand of the mixture. In addition, you will need to know the total area of ​​the walls and the thickness of the layer.

Therefore, if you have all this information, will it be easier to use a pocket calculator and spend all the calculations yourself?

Read more