Probably, each of us read the beautiful fairy tale "Little Prince" or watched a cartoon on the book. Many caught fire to create a beautiful friend - Fox, such a fun, funny and most importantly - faithful! In this article we will tell about how to sew a fox from a little prince.
Gift child
The master class described below will help you easily and quickly sew a toy for a child with your own hands. To work, we will need a micro-micropouls fabric, white and orange colors, threads in the color of the fabric, needle, paper with scissors and a pencil. For eye and worsh, you can use buttons or beads.
The following photo shows the fox pattern on which all information is indicated.
Note! When you redraw on the fabric, it is worth considering that there is no allowance on the pattern. It should be done about 1.5 cm.
If it seemed to you that the fox was too thin, then you can increase the size of the tummy on the pattern. After we painted the drawing on the fabric, cut it out.
With the help of a pin, we attach all the details to each other. The wrong side should be outside. Next you need to sew a blank. You can do it on a typewriter or hands. If the front side looks outside, then cross the toy with the secret seam, and if inside - registered. At the bottom of the toys, we leave a small hole in order to further turn the toy and fill the filler. Remove pins.
In the billets of the tail and paws, we first flash the edges, and then the rest of the place. Do not forget to leave the hole below.
When we sew ears for the fox, then first sew black fabric, and only then add red.
After we have stitched all the billets for the fox, you need to turn them off, and then fill. You can use wool, syntheps or any other filler. We will also need a small wire.
Article on the topic: Openwork crochet: patterns and schemes without failure method for beginners
Fill the toy.
Inside the toys in the center we stick the wire, clicking a bit of her edge, so that it does not break the fabric in the future.
Now open holes on the paws are sewn. Exactly the same manipulations are done with the tail.
From the cardboard, cut out the billet for the ears.
We sew them to the body of the leaf.
Next, sew eyes and spout.
Where seams, wake the wire in the body as shown in the photo.
At the edges we make a loop.
Making synthepsum volume.
We put on top of the detail of the paws and sew them to the body.
At the edges you can sew butchers.
Here is such a beautiful toy we came out.
Knit Lisenka
Lisa hook is not difficult, but it is worth being attentive. For work, the threads of suitable colors will be needed, the hook corresponding to the thickness of the thread, the filler, thin threads and the needle.
We recruit sixteen air loops on the hook and begin to knit with columns without a nakid, a boating hook in 2 loop. When the second row was completed, we show the lift loop, turn the product and continue to knit another 40 rows. After that, in each unpaired row, it is worth separating the second and penultimate loop. In this way, we are tied ten rows. And then we do the accurate until we get the shape of the triangle.
First, the paws are in black threads, and then replace them with orange. We recruit six air loops in the ring. In the next row, we make six additives, then knit another four rows of twelve columns without Nakid. At this stage, it is necessary to replace the black thread orange. And there are four more layers. In the 13th row knit according to such a scheme: two columns and make a gravel. A total of nine loops should come out. Knit another four rows of nine loops, then we make a gravel. At the twenty-first row should be only six loops. We also have a couple of rows, add a filler to the product and sew edges.
Article on the topic: How to wash blinds from dust and dirt
The front four air loops connect to the ring, in the next row we make 4 absorb. From the third to the seventh row knitting eight columns without Nakid. We change the thread and knit up to 22 rows of 8 fails. In the process of work, add filler to the toy.
During the knitting of the tail also gradually fill the part of the Sintepona. We connect 6 VP into the ring, in the second row through one loop we make an increase, in the following - through three and so to 6 rows. In total, it should turn out 36 failures, they knit from 7 to 11 rows. At this stage, we change the thread and knit up to 16 rows. In the 17th row every four fails you need to do one gravel. Then I check four rows of thirty failures. In 23rd row we make a burning through every 3 fail. From 24 to 28 knit 24 fails. 29 - A pair of fails, UB, and then four more rows of 19 fails. In 35 row through each beat we make a burning. We have another 4 rows and do not close the product.
6 VP connect to the ring, then make the addition to each loop. In the next row, the purchase is performed through one fail, then after two, in the fifth through three.
We start knitted ears. We will need only two detail.
6 VP, and in the next row we start knitting from the second loop, turning the product. Knit a detail, making the accumulation until we get a triangle. Now we bind the ears with two rows of black threads.
To make a nose, connect three EP in the ring, we make an increase in each loop in the second row, and in the next loop. Thug holes.
We sew all the details obtained among themselves, and our fox is ready.
Video on the topic
Look at the selection of video lessons on how to make such a cute fox.
Article on the topic: Appliques for children 3-4 years old: crafts and abstracts