How to open the door if a handle broke

The lock does not open what to do?

Many manufacturers of door structures often sin the installation of cheap fittings on them, from here and its frequent breakdowns. Door handles are especially susceptible to damage. Neither the owners of cheap doors are not insured against such an unpleasant breakdown, neither people who have established expensive door structures. The reasons will be different, and the result is a broken handle and overlapping access to the room.

general information

Before moving to any actions to eliminate the effects of the door handle breakdown, let's learn about this element of the door design.

For the entrance doors there are several types of handles. The most common view is Chinese products

For two types of locks - with automatic locking and standard closing procedure. Such a piece of breakdown protects the armored cup, but the overall quality indicator of such handles leaves much to be desired.

The handles on the straps under the cylinder are distinguished by the correct fitting mechanism to the door design and better material that is used in their manufacture. The main manufacturer of such handles is Italy.

The following type is variated under the Suwald key. An extremely specific type, when breakdown, you will need to install the lock brand and, respectively, to replace.

Designs with separate base are distinguished by multifunctionality and wealth of color solutions, however, this is the second, after the Chinese category of the knobs of the most susceptible to breakage. Such products often simply come off from the door design due to the fact that it was initially attached incorrectly or a malfunction of the castle makes it makes applied additional efforts to open doors. Also, these structures quickly lose a nice appearance and, in this case, also require replacement.

What you need to know about replacing door handles?

Shooting and subsequent installation of a new door handle should be carried out taking into account all the features of the shut-off mechanisms, as well as to provide consequences of the replacement on the functioning of the door structure itself.

Article on the topic: How to Clean the Energy Saving Lamp

Installing a new handle to the inlet metal door will require certain skills in working with some types of tools, with the metal itself and knowledge of basic safety regulations.

The broken door handle does not always require a mandatory replacement. Sometimes it can be repaired, which will significantly save money. The repair of door handles is usually the same companies that carry out the replacement of locks and doors.

Prevention breakdown

As the most vulnerable and damaged part of the door design - the handles require regular prophylactic inspection, and the adoption of some timely measures.

At least once a year and the castle, and the handle is removed from the door and disobey in detail, they produce a thorough treatment of rubbing parts of the mechanism with an oily composition. It is possible to use ordinary petroleum sold in any pharmacy.

Carefully examine the self-snap-down mechanism located on the handle. Sometimes it may require self-hand-made holes.

How to open the door if a door handle broke?

Video instructions that are shot on the Internet can help, but it is best to read and remember the following information:

• The handle can be dismantled and to attach some temporary option. But open the door if the handle is combined with a locking mechanism - it will not help.
• If the latch swapped on the door handle, the lock will be best to disassemble completely and adjust the snap-down mechanism.
• Remove the handles from a new similar castle and attach them instead of old. This method is bad not only by its painstability, but also in that the real reason for the breakdown will not be detected, and it threatens it with regular repetition.
• Fully cut locking mechanism from the door.

However, the most recommended and desirable method in this case is an appeal to those skilled in the art that, as soon as possible, unlock the room, dismantle the old handle and install a new one.

Article on the topic: How is the niche for LED backlighting the ceiling?