Fabric rollers on windows with their own hands

Now from bright sunlight and curious eyes, not only traditional textile curtains and blinds are saved, but also fabric rolets. They are a smooth fabric cloth twisting in a roll with special mechanisms.

Fissure rolets on the windows are sold today in a large assortment, but they are completely easy to make them on their own.

We invite you to familiarize yourself with the video, as well as describe in detail the order of all actions.

Homemade Rolling

Necessary materials

For the manufacture of window rods from the fabric, you will need the following items:

• Two types of fabric cloths: first - for the front side and second - for the rear;
• Wood rail;
• Tread made of wood;
• glue for working with textile products;
• harsh threads and polyester threads in tone tone;
• clamp;
• Two transparent rings through which the cord will stretch;
• stapler;
• Two tips and cord.

Cooking fabric

In order for the selected tissue to be ready for sewing rollers on the window, you must perform the following steps:

1. Take a fabric intended for the front panel, and cut a piece of the desired size from it, adding two centimeters to the width, and to altitude nine. The second fabric that will serve as the rear wall should have similar parameters.
2. For the manufacture of ribbons holding rings, cut two strips with a length of 23 centimeters and 7.5 centimeters width.
3. From a lining piece of fabric, cut two pieces, the width of which should be 6 centimeters, and the length is the one that would have enough for the grip of the pin. Along the side sides of the cut pieces, bend the swell on one centimeter, then glue them into two ends of the pin using textile glue. From the tissue for the rear panel cut down two circles necessary to close the ends, and glue them.
4. Prepare a segment of the lining fabric, taking into account the length and thickness of the rail. Purley it carved. Also prepare two pieces of the same cloth to close its ends.

Article on the topic: Doors from the lining do it yourself: manufacturing technology

Getting Started Runs

After you have all prepared, you can start tissue tissue rolling. The order of your actions when making their own hands should be:

1. Fold both surfaces fabric face inside. Stop them at a distance of one centimeter from the edge of the sides and at the bottom.
2. Make cuts in the corners and remove there, then go through the sides and on the bottom of the canvas with a decorative line.
3. Attach the pin to the bottom of the front panel of the resulting fabric linen and enter it into place of harsh thread, passing it all the time over the pin. Make sure that the stitches are the same.
4. Make a braid, for which you need to fold the pre-carved fabric strips along their length in half a face inward, it is necessary to start, sitting in length at a distance of 5 millimeters from the edge, after which they need to be turned out and stroke the iron.

Collect Roleto

The next step after sewing the cloth for fabric rollers will be their assembly and installation on the windows. For this you need:

1. Using a stapler pistol, connect the web with the rear surface of the rail from the fabric. Then bend the ribbon twice and skip each of them through the ring.
2. Cut two ropes of such a length that would be three times the height of the ROL. Attach on the edges of each rope along the nodule and, using the stapler, attach them to the rear surface of the rail in such a way that they fall on the reverse panel of the ROL. Install the clamp on any half window.
3. Unscrew the rolling rolling a little to the side and in the mounting places, make a hole on the covering rail of the inner tissue. Drill in the surface on which Rolets will be attached, holes and secure the rail with screws.
4. Roll into the roll from the pin from the face looking into the room. Miss the ropes at first under Rolu, and then over it, then thread each of them in the ring over Rol. That rope that is located on the opposite clamp of half the windows, skip and through the second ring. At the tips of the rope, secure the limiting tips.
5. Raise the cloth, slowly pulling the rope, after which you fix it on the height you need by turning the ends of the rope around the clamping window.

Article on the topic: Strengthening of wooden overlap - how to strengthen the ceiling and beams of the second floor

On this, work on the manufacture of fabric rollers can be considered completed with their own hands. As you can see, this process is not so complicated as it may seem at the very beginning, in any case, you can guide not only description, but also the proposed video.