Among the numerous owners of private houses, which are erected from natural tree, cut, timber, often you can find an opinion that is not suitable for such a rail door. If the steel structure is a mandatory element with the arrangement of the housing in the metropolis, then the installation of such a product in a wooden house causes a smile on the face of skeptics, and all because the iron construction in this situation does not perform its basic function.
Institutes Installation Installation
Advantages of iron doors
The inlet in the wall is not an obstacle on the path of vorays. Rather, not much is wrong - naturally, steel construction is almost an impregnable fortress, but at the same time the walls of the tree surrounding such doors do not possess the glory of an inaccessible structure. Very frequent cases when attackers penetrate into a wooden house, drank in the wall of the desired hole in the structure of the desired size - in this case, it does not matter exactly which element protects the input opening.
Another reason why it is not worth installing metal structures in a wooden house - they are passing into the room noise and cold air from the street. But this argument can be considered obsolete, because an iron warmed design can be purchased easily - a layer of a special insulation is used.
Some people believe that the construction of metal, protecting the passage to the building, is best suited for mounting and leads to this a few weighty arguments. The main argument: the door of iron is the wonderful decoration of the private building, significantly increases its status. In addition, the iron door as needed can be easily repaired with their own hands.
Mounting design
The installation of a metal structure at the entrance to the wooden house has a number of nuances associated with the peculiarities of the construction material used in the construction of the construction material. The walls of the structure, in the course of its use for purpose, as if "moved", because wood, depending on the weather, shrinks and swells. All deformations are minimal, but for the design, which is located at the entrance to the room, for the most thoroughly fitting mechanism, these processes can become fatal.
Article on the topic: Is it useful to sleep on the floor: opinions and advice of experts
If the door design is slightly overwhelmed, then there will be problems with closing-opening. Door design should not come into contact with "floating" walls. Before installing the iron door to the wooden structure, it is necessary to wait until its full shrinkage occurs.
People who know how to install the metal door, note that if you install a casing box, then you can prevent damage from the inevitable strain of the walls. To make a casing, the wall is done in the wall, exceeding the size of the iron door from all sides about 7 cm. Next, the board is fastened along the doorway contour - this is the same box that takes all wall oscillations.
Installation methods
The expression "put the iron entrance door to the structure from the bar" necessarily implies the fastening in general design to the tree. Self-tapping screws are applied to the attachment. The self-tapping screw is accomplished through the box of the box, and then in the maximum deepening deep into the wood.
Such installation is the most secure, because if you make an installation by cooking a box to rods in wood, then a fire may occur. After all, it is necessary to "hide" from the eye with a proportion of mounting foam, which was used to fill the gaps. To do this, use a special decor. To find out how to better improve the entrance of your housing, you can familiarize yourself with the photos on which the decor options are presented.
The owner of the housing, wanting to install the door of iron, can trust professionals, and can do work with your own hands, reviewing a number of thematic videos for familiarization with the details of the upcoming work.
Builders today are all more advantageous using iron structures for brusade buildings, although they make it with a small caution. It is the opinion that this input element from iron comes into some kind of disharmony with the stylistry of the room. In practice, it can be seen that the iron structures and walls of the log structure are perfectly merged into a single composite solution. How it looks in reality - look at the photo.
Residents of high-rise buildings who managed to put an entrance door with such a device as an intercom, managed to evaluate them. Such structures reduce the number of unseassed guests, keeping heat in the room.
Article on the topic: How to make a water pipe in the country: Select pipes, scheme, laying method
In private residential buildings, the doors made of iron with intercom are also often installed. Naturally, the need to put the intercom occurs if the structure is with two or more floors, and there is a possibility that not the owner will not hear the call.
You always need to remember that it is not enough to choose the door correctly, it is important to correctly produce its installation. Otherwise, the design not only does not guarantee the safety of the property, but can also become a source of various troubles - for example, the locking of the lock.