Sometimes the smallest details of the wardrobe attract universal attention, especially if this thing is made with their own hands. Try your hands to tie out openwork socks and see what surprise they will call when I find out what you did themselves, and not purchased in the store. A large number of knitting schemes, inexpensive yarn and a little free time is all that you need to create such an elegant update. In this article you will find the answer to the question of how to make openwork socks with knitting with diagrams.
Such a model fit very easily, and a dense warm yarn will warm your legs with cold winter evenings.
You will need:
- Yarn (50% acrylic and 50% wool);
- Spokes number 2;
- Scissors.
Important! If you get yarn with a polyester, then your socks will not roll.
We give warm in the winter
First you need to measure the foot on which you will knit socks. Let's show openwork mating based on the following dimensions: the length of the foot is 21.5 cm; The shin is 18.5 cm. The mating density in this case will be 10 cm of the knitted web - 54 rows of 40 loops.
First, I will give 72 loops and distribute them for four spokes of eighteen pieces. Clear product without twisting loops.
At the very beginning of the row, put the color string or any designation, in the future you will move it with each nearby.
Next, we assign the first number with hinges.
After you have led the first row, you need to follow the following instructions:
A series of 2 - 1 Announced loop (hereinafter izn.), 7 facial loops (hereinafter l.), 1 Announced loop. Thus, repeat up to the end of the row.
Article on the topic: Fish from salt dough with their own hands with photos of templates
A row 3 - 1 is elevated, make a nakid, 2 l., Remove 1 loop, check 2 together with the front and travelery through the removed loop, 2 liters., Nakid, 1 is elevated. Repeat so until the end of the third row.
A series of 4 - 1 is elevated, 7 liters, 1 out., We repeat to the end.
A row 5 - 1 is broken., 1 l., Nakid, 1 l., Remove 1 loop, check 2 together with l. and stretch through the removal loop, make an outfit, 2 l., 1 is broken, repeated.
A number of 6 - 1 is elevated, 7 liters, 1 is elevated, repeat to the end.
A number of 7 - 1 is broken., 2 l., Make the Nakid, remove 1 loop, check 2 together with l. And stretch through the removed loop, make an outfit, 2 l., 1 is elevated, repeated to the end of the row.
Knit according to such a scheme until the sock becomes 19-20 cm long. It is necessary to finish knitting on the seventh row. You have to get a beautiful smooth pattern.
Summer openwork socks
With the help of the schemes, you will learn how to tie a summer model of openwork socks. Such products are perfectly suitable for wearing a warm summer evening.
For a summer model of socks, we need 2.5 mm and thin yarn knitting needles (25% polymad, 75% wool).
Below you can see the schemes for the mating of the openwork pattern.
Legend to the scheme:
1 Nakid:
2 Together with facial:
Removing 1 loop, stick 2 facial and broaching loop through removed:
Removing 1 loop, 2 together with the face and broach the loop of the removed:
Instructions for knitting
For 36-37, the sizes of the foot are typed 62 loops and insert 2 rows of facechair, then perform six circles with rubber band 1 to 1. In the 7th row, the first eleven loops are tested with a rubber band, the remaining 51 loops are "face", while you need to evenly donate ten loops. As a result, 52 loops should remain. The next row is the initial 11 kettop of the knit elastic band 1 to 1, the remaining forty-one loop to the pattern M1. You stop when the web will reach sixteen centimeters, then we leave the gum and eight loops on both sides, move the loops that remained onto the pin - it will be the front of the sock. Next, knit another five centimeters face-up. In the middle, put the designation in the form of a color thread and later measure it from this place.
Article on the topic: Openwork crochet patterns with schemes and decoding
The heel is tied like this:
Row 1 (face) - front 7 loops, remove one, 1 facial, stretch it through removed and turn back.
A number 2 (exhaust) - to knit 7 loops with an invalid, remove one, 1 out., Stretch it through the removed loop, turn around.
Ring 3 - knit facial 6 loops, remove one, 1 facial, stretch through removed, turn around.
A row 4 - knit with an invalion to 6 loops, remove one, 1 out., Stretch through the removed, turn back.
Thus, they are preserved until 15 loops remain. After each side, we take 13 loops and remove the loops from the pin, 66 loops will remain on the spokes. 25 loops in the middle separating the colored thread on both sides - it will be the top of the sock. Then these 25 kettops knit the m2 pattern, the remaining loops knit the stroke of the facial, while we make the outflow in this way - 2 loops cross together with facial threads and two together with the front, which go after the pattern. Loading the loop costs eight times so that there are fifty hinges. Make a pattern of 18 cm long from the middle of the heel. Put the colored threads on the sides of 25 loops on top and bottom, make a mating facial stroy. We continue to subscribe loops through a number of 4 times, after each row six times. As a result, ten hinges will remain, which must be pulled together and brew.
You can use diagrams with two more beautiful patterns that will look good on thin socks:
These patterns can be taken as the basis and form their own option.