Walking down the street or hike to a doctor with a baby can turn around any surprise. At any time you may need a bottle with water, a napkin, a diaper, nipple, a diaper, replacement clothes, as well as a wallet, money or a telephone. All these necessary little things are very uncomfortable to wear in an ordinary women's handbag. For this, special packaging bags are invented to make any way out of home comfortable. If your stroller does not have such a necessary accessory, then we propose to sew a bag for a stroller with your own hands.
Required materials and tools:
- Two pieces of lining;
- Two pieces of outer fabric;
- Two parts for twisted tops;
- fabric for belts;
- Velcro;
- buttons;
- scissors;
- line;
- threads;
- needles;
- sewing machine.
We work with details and corners
Prepare two pieces of outer fabric and two pieces of lining with a size of 30.5x56 cm. Fold them together and spend along short sides and on the bottom, leaving an unnecessary top. Treat the zigzag these 3 sides, repeat with 2 parts of the lining. Now take one of the corners and bend it down, as shown in the photo. Memore from the tip of the angle about 10 cm down, at this point, place perpendicular to the edge of the angle. Repeat with another angle and with lining angles. Remove to the outer side.
We do the top
Cut two parts 44.5x37 cm, which will be used for the top of your future bag. Place them together, scratch the short sides and one lower part, leave an unimpressed top. Secure the corners. Then turn out and push the typewriter from all three sides.
We sew straps
Since our carriage bag will have the straps, cut out one long piece of basic fabric and lining. Then cut another two such pieces and cut them out. Sweep two long pieces together on the sides. Then sew a short piece of the main fabric and a piece of lining corresponding to it. Sust again along the parties and from one end. Remove all pieces from three sides.
Article on the topic: Cross embroidery scheme: "Monochrome" free download
Attach straps
Take one of the short slices of the strap and fold it face up along with a long piece. Purchase at the ends. Attach the stitched belt piece to one of the sides of the bag. Attach the rest of the belt pieces, as shown in the photo. Consider them carefully.
Stitching bag
Once all the belts are attached, put the bag inside the lining. Align the sides and upper raw edges, secure the pins. Watch all over the perimeter, leaving about 25 cm unpleasant along the front side. Then remove the bag through the hole. Fold the untreated edges of the hole towards the inside of the opening opening. Purchase. Find the iron all the seams. Continue to sew throughout the perimeter to the back of the bag.
Bag is ready
Finally, it's time to add velcro and buttons to a folding top and strap. 8 pieces of buttons are needed. Add two buttons to the bottom of each of the short straps and the back of the other ends of the short ribbons. Add two buttons to the end of a long piece. And on the opposite side, add two more buttons. Now place the velcro along the long belt, and then on the front of the short one. When the long belt is connected short, it should look like. Then add some velcro on the inner side of the folding top and along the front of the bag. Ready! That's the way we got a beautiful 2B1 bag for stroller with your own hands.
