In the life of every motorist, the garage occupies far from the last place. As a woman is important cleanliness in the house and for a man just needed order in his garage. The constant attributes of this place are various cabinets, shelves and, of course, a large table.
When assembling the workbench, it is necessary to take into account that the surface of the table should be thick enough so that when applying shots it could not break.
The table, as, in fact, and the rest of the furniture, can be made independently. The easiest solution will be the manufacture of a table from a tree into the garage with your own hands.
Required tools and materials
The following tools may be needed:
- Any item writing on wood;
- wood hacksaw;
- roulette;
- Screwdriver and drill;
- level;
- Gloves, plastic glasses and other security elements.
I must say that other instruments may be needed.
The following materials will be required:
- glue on wood;
- wood;
- Nails, bolts, wood screws.
Workbench device.
As for wood, we can talk about such materials as:
- 2 boards with dimensions 0.9 * 0.1 m and 2.5 cm thick;
- 4 boards with dimensions 1.7 * 0.1 m and 2.5 cm thick;
- 17 boards with dimensions 1 * 0.1 m and 2.5 cm thick;
- 2 boards with dimensions of 1.6 * 0.1 m and 2.5 cm thick;
- 4 bars with dimensions of 0.75 * 0.1 m and 5 cm thick.
It should be noted that if the table is planned to be used as a place of storage of any spare parts, tools, then the boards are better to choose the thicker, like legs, for example, 75 * 10 * 10 cm.
The same thing must be said about the length of the boards and, accordingly, the table itself.
Stages of self-assembly
The whole process can be divided into the following steps:
- Assembling table top frames.
- His strengthening.
- Fastening boards to frame.
- Installation of legs.
Immediately it is necessary to determine what the table will be: team-collapsible or unintended.
The difference between them is only used as fasteners for individual elements.
Article on the topic: Instructions How to Stroke the wall under wiring
If you plan to make the table collapsible, then you need to use bolts and nuts, if unintended, then self-tapping screws and nails.
So, the direct assembly begins with the fact that boards and bars of the desired size are cut from the source material. Then they are all soaked with special antiseptic compositions. Since the table will be used in the garage, then its elements must also be soaked with the flavored - the composition protecting wood from open fire.
Only after that you can collect the framework. The first thing on the edge is placed the boards 1.7 * 0.1 m at a distance of 90 cm between its external edges.
Build workbench.
After that, two more such boards are put in the middle between the first two at equal gaps.
On the side of these two boards 0.9 * 0.1 m are end planks. They serve to further bond all carriers of layers among themselves.
Then it is necessary to fix one with the size of 1.6 * 0.1 m on extreme bearing boards. These elements will serve as an increase in the rigidity of the entire design.
After this step is made, with the edge on each side will remain 5 cm. This is enough to fix the legs. However, if the material is chosen with a greater thickness, then the distance needs to be left more.
After making the frame and its amplification, it is necessary to start the trim. Boards Countertops are attached across the bearing elements. You need 17 such elements with a width of 10 cm.
It is necessary to immediately say that the table top must be wider than the frame, therefore the boards are taken not 0.9 m, but even 1 cm. It is allowed to use and even longer. In addition, instead of 17, you can take 18 boards: it will help to hide the frame and from the ends.
In the end will remain fastening the legs. As already mentioned, it is possible to do this with the help of bolts or screws.
Article on the topic: Accessories for rolled curtains - frame base
If bolts are used as fasteners, then they are applied as follows: the holes of the desired diameter are drilled at first, and then the bolts are screwed. At the same time, it is necessary to use rubber gaskets and from the side of the bolt, and on the side of the nut. This is necessary, in order for the fastening places there are no traces.
Tips for the manufacture of table
As you can see, assemble the simplest table for your garage is not so difficult, as it seems at first glance. But keep it clean - this is a challenge a little more difficult.
To extend the life of the table and contain it in its original form, all its separate wooden elements are covered with varnish. From its surface, remove any pollution is much easier than with a clean tree.
Another important point is the ease of use of such furniture. Only approximate dimensions are given here. For the most part, it concerns the height of the legs. They should be done on their height.
It should be noted that the legs themselves can not be located outside the frame, but inside it. Fasten them in this case, it is necessary to carry on the carrier of extreme boards and end straps.
In addition, no one forbids making legs very high, which will allow you to build a table not with one tabletop, but with two.