Male sweater knitting with diagrams and descriptions for beginners with video

This master class on how to tie a male knitting sweater with schemes and descriptions.

The models of the male sweater are quite a lot - "with a throat", pullovers with various patterns and shapes of the cut, with the plane seam. By execution, men's sweaters differ from female direct smooth knitting (no plotting) and long sleeves. In addition, most male sweaters have a closer cut than women's, as they are often put on top of shirts and other clothes.

How to tie a male sweater with knitting needles on the example of different models with different ways to knitting.

Step by step instructions

A classic warm sweater with a high collar "under the throat", perhaps, have every man. This simple winter model has not been out of fashion for a long time.

Such a sweater can be associated with themselves: knitting is simple and understandable and can be the first experience of volumetric knitted work for beginners.

Necessary materials:

• yarn - 100% wool, 120 m / 50 g of blue or black (16-20 clubs);
• Spokes number 3 and 3.5;
• circular spokes number 3;
• auxiliary needle;
• needle for assembly.

Sample knitting density 10 × 10 cm:

• for spokes number 3.5 - 22 loops on 30 rows;
• For spokes number 3 - 23 loops on 30 rows.

Size: 46-48 (50-52).

The addition and recess of the loops has the designation of the type "1 × 2x4", which means "1 time 2 loops in each 4 row".

Progress:

1. We begin knitting with the back: We recruit 110 (120) hinges on the knitting needles No. 3, we mark the beginning of knitting with a marker and knit 6-centimeter gum 2 × 2;

1. For 46-48, it is evenly added 2 loops in the last row of gum (112 loops);

1. Go to the knitting needles No. 3.5 and knit approximately 44 cm as follows: 12 (11) With a rubber band of 2 × 2, the following 88 (98) loops of the face and again 12 (11) loops with rubber band;

1. We make each outflow from both sides - 1 × 2x4 and 11 × 2x6 (6 × 2x4 and 8 × 2x6);

1. Having connected to 67 (68) cm from the first, set edge, close the central 16 (18) hinges for the neck and end each side separately;

1. We reduce 2 × 6x2, and after 69 (70) cm of the web closed the remaining loops on both sides;

1. Knit before the back, but with a deeper neckline;

1. Linking 56 (57) CM Close 12 (14) loops in the center and end each side separately;

1. We close 1 × 3x2, 2 × 2x2, 2 × 1x2, 3 × 1x4, 2 × 1x6;

1. Linking 69 (70) cm, close the remaining loops on each side;

1. We begin to knit sleeves: score 58 (62) loops on the knitting needles No. 3 and knit a gum 6 cm;

1. We make an increase of 7 × 1x8, 13 × 1x6 (7 × 1x8, 13 × 1x6);

1. Linking 47 cm, for the plane seam, we close 2 loops once (only for 46-48 sizes);

1. We make a reduction of 6 × 4x6 (5 × 4x6) and 3 × 4x4 (5 × 4x4), and in the following 3 rows, to make 2 recesses after 9 loops, after 8 loops, after 7 loops, respectively;

1. We make the last defendance (14 loops should remain) and we close all the loops;

1. We make shoulder seams;

1. We make the collar: on circular spokes along the cutout score 136 (140) loops and knit first face, and then with a rubber, close after 21 cm;

1. We cover the sleeves, sew the side seams.

Article on the topic: What a polyester fabric and what is its differences from other tissues

Scheme as a hint:

This model is an Irish pullover - tested from above, starting from the collar, and is distinguished by patterned shoulders, which smoothly go into the sleeves and allow you to avoid the shoulder seam.

You must associate such a model, the main thing is to deal with the beginning of knitting, that is, with a collar and shoulders.

Required materials and tools:

• yarn 100% wool (120 m / 50 g) - 16-20 clubs;
• Breaking spokes (3 and 3.5);
• circular spokes (3 and 3.5);
• Additional knitting needles for knitting patterns (COS).

Density: 22 loops per 30 rows for a sample of 10 × 10 cm. Size 50-52 (54-56).

It is convenient to make fittings in the knitting process - this will allow you to make a sweater according to the figure, taking into account all the features.

General description of the work:

1. For a collar, type the required amount of loops on the collar knitting needles (in accordance with the neck and the associated sample) and knit in a circle of 1 × 1 or 2 × 2 with a rubber band of 1 × 1 or 2 × 2 (more than).

1. For wide strips, the loops are divided equally and knitting continues in two sides. For the "narrow" shoulders, it is necessary to count the desired number of loops from two sides, and the remaining loops move to the knitting pin.

1. Knit shoulders with a pattern (for example, braids) to the desired length. The extreme loops remain open (transferred to the pin).

1. To transfer the loops on the edges of the "pursuit" and the remaining (if any) hinges on the pins and knit separately on both sides of the back and before taking into account the expansion for the chest and sleeves. When the sites of the sleeves are passed (you can learn fitting), knitting is transferred to circular needles and fit in a circle.

Before and the back can also be associated separately, and then sew to the edges of the shoulder strips. To do this, 116 (124) loops are recruited, a gum of 1 × 1 is knitting, and then the main part of the pullover (smooth or patterns). For the beeps, 1 loop is added from two sides in each 16 row. For the plants (the height of the product 43 cm) is closed once from both sides of 6 loops, and then one 24 (27) times. After 59 (61), cm Close all loops.

Article on the topic: Openwork cap crochet for babies: master class with video and photo

1. For sleeveless on circular or stocking needles, the remaining no closed loops of the shoulder strips are transferred. Next, the two sides are recruited extreme hinges from the walls of the transfer and back.

1. The sleeves rop in a circle to the cuff (they can be increased or narrowed to the hands of the hands);

1. The cuff and edges of the handle and the backs knit with a rubber band of 1 × 1 or 2 × 2.

Other models can also be knitted from top to bottom, but for this you need to master the plane from above, i.e. Upper seam connecting sleeves, front and back. Sometimes it is the most difficulty part in knitting a sweater.

In order to understand how to knit the regulated seam from above, you can try to associate a sample (do not take to the end). To do this, you will need:

• Breaking or circular knitting needles (2.5 or 3 mm);
• yarn;
• Additional spokes or pins.

Progress:

1. We recruit 112 loops and knit 4 cm gum 1 × 1;

1. We distribute the loops: on the back and in front of 40 loops, on the sleeve - 14 loops, the remaining 4 loops remain for the plane seam (knit with Nakud);

1. Knit in a circle: 40 loops of smooth, nakid, 1 facial loop, nakid, 14 loops, nakid, 1 facial loop, nakid and repeat also for the second side (knit so 32 cm);

1. We carry the loops of the sleeves on the pin or individual knitting needles, transfer the back of the back onto the needle and insert a part of the transfer and back;

1. Knit sleeves in a circle with fertile knitting needles.

If you continue knitting, you will get a full-fledged sweater with a smooth and neat plane seam.

Video on the topic

Video selection of master classes, how to knit a male sweater.