Tree and brick need protection and difficult constant care. Siding panels look great, do not let moisture and keep warm. The profile under the tree and stone is often used for the interior decoration of residential rooms. In the bathroom for vertical strips of plastic flows water. Soap foam and splashes leave no traces. Pollution is easily flushed and wipped with a napkin. Repair will move quickly if the dimensions are removed correctly, the panels and metal profiles are purchased in the desired quantity.
Siding
We choose siding, taking into account the size of the walls
Siding Sizes Width Panel Length
My friend acquired cladding skills by siding on interior decoration. We faced the walls of the bathroom and the toilet in the apartment that he was preparing to surrender. It was necessary to have a beautiful and cheap repair. Now it's time to take care of our aunt. Older women are very economical. They did not want to buy excess material and asked Vadik as mathematics, to accurately calculate.
The panels themselves are inexpensive. The main cost of finishing is the component profiles for fastening and decorating siding and crate.
My responsibilities included measurements of premises parameters and providing data on panels, what their width and length they have. Since the approved single standard for plastic materials for the interior decoration is not, I wrote the most frequently used for a friend.
Attention! Measuring the perimeter of the room and the height of the ceiling, do not forget about niches and protrusions. For them, you need to buy additionally corners and J-profile.
Facade siding is more expensive. It is thicker and stronger, the width of the bands is greater. Exterior profiles are calculated on the impact:
- frost;
- acid rain;
- ultraviolet radiation of the sun;
- wind.
Article on the topic: Porcelain dishes: What are the advantages?
If desired, it can be applied to the inner lining of the hallway and the living room. Use panels for the facade in bedrooms can not. Supplements, reinforcement and resistance can allocate harmful substances in minor quantities. For interior decoration, the step between the rails is always made 400 mm regardless of the direction of the skin. On the street, dimensions can be increased in some cases up to 800 mm, depending on the method of insulation.
Vinyl panels for outdoor and interior decoration
Wall decoration Siding
Vinyl panels have different sizes. The width and thickness are calculated on the basis of the required blow and deflection strength. Thicker sheets are used when facing the facade. All types of profiles are suitable for interior decoration. The length is made on the basis of allowable sagging and standards for the height of the ceiling.
The table shows the size of the vinyl siding panels of different types.
| Name of the type of panels | Brand | Width, mm. | Length, mm. |
| Blackboard Grand Amerika. | Grand Line. | 203. | 3000. |
| Bobber block house | Yu-Plast | 230. | 3400. |
| Panel Front Air Side | Dolomite | 180. | 3000. |
| Facade panel Rock Vin | Dolomite | 260. | 3000. |
| Board Standard | Fineber. | 205. | 3660. |
| Looper Block House Amerika | Grand Line. | 244. | 3600. |
| Board Standard | Yu-Plast | 230. | 3050. |
| Shipboard | Alta Profile | 230. | 3660. |
A similar table was created by Vadik from the materials you like. In it, he added component profiles and the price for each position. In the last column, put the value of the material on a specific bathroom and hallway. The lungs panels, it is convenient to install them, so for the bathrooms, we calculated the ceiling cladding.
Independent decoration of walls
The hallway aunt wanted to arrange in an ethnic Russian style. Therefore, they asked to consider the creation of a log cabin. The profile of a single-continuous Hauus block is higher and it is more expensive because it is made for the facade. The double-proximal panels under the logs are closed less space, as the bulge below and the strip width longer. Such panels are easier and faster to mount. They are cheaper than the exterior.
Article on the topic: Design of combined bathroom. Stylish and organically!
Two-permount siding under the log has different dimensions. The table shows the sizes on metal panels and vinyl from different manufacturers.
| View of Siding | Width, mm. | Length, mm. |
| Metal and race under the log | 360. | 8000. |
| Vinyl Docke. | 240. | 3660. |
| Fineber, Brevno | 232. | 3660. |
| Vinyl alta-siding | 320. | 3100. |
You can apply this siding for outdoor and interior decoration. Vinyl panels are sold packaged 12 and 20 pieces. Metal bands cut to order, so you should immediately prepare the size of the walls and the ceiling. Thus, there are practically no residues, and the costs of cutting are reduced. The width is fixed and depends on the number of fractures.
Facing a niche and space over the doorway Vadik expected to make out of suitable residues. For this, it was important for him to know the length of the strip.
Acrylic Siding for Inner Saving
Siding for walls
Durable and wear-resistant material is used for outdoor and interior decoration. Acrylic panels may have the size of the same with a vinyl profile and individual. Each manufacturer makes siding on your technology. Width and height are laid by bending rollers. You can only change the installation of a new tool. Thickness and length are adjustable by adjustment to the desired operation mode.
Acrylic and vinyl plastic have similar characteristics. Profiles can be manufactured on one equipment. Therefore, the dimensions differ more between the products of different firms and types of the profile formable by the tool.
Siding acrylic for interior decoration from one manufacturer of the alta-profile has different sizes.
| Name | Width, mm. | Length, mm. |
| Vertical Quadrohous. | 205. | 3100. |
| Shipboard | 230. | 3660. |
| Bedflower Blockhous. | 320. | 3100. |
| Single-continuous blockhous. | 200. | 3100. |
Holding the number of panels, decide on the direction of the panels. Then you can accurately calculate the number of pieces from the strip and remnants to cover small sites. The size of the area can give you an approximate amount of material. For cheap plastic, you can simply add 20 - 30% on cutting depending on the complexity of the wall configuration.
Article on the topic: How to glue phlizelin wallpaper with your own hands: technology (photo and video)
Metal: cutting into size
Metal: walls
Metal facade siding with a complex multi-layer coating rate is not inferior to a component profile. You can transport a panel with a length of 8 meters only on specialized transport. To avoid deflection and deformation under its own weight, buyers recommend the maximum length of 6 meters.
The base panels are thicker and shorter in length. They are stronger, harder and have different sizes depending on the manufacturer and material. They are attached with the help of self-tapping screws in the presence of a perforated strip, kleimers and paste on the plaster. Between themselves are connected by locks of various designs.
Depending on the materials and purpose of the panel, they have dimensions within certain limits. The table shows the main types of siding for interior decoration and basement.
| Material | Width, mm. | Length, mm. |
| Natural tree | 60 - 220. | 2200 - 3000. |
| Sand-cement mixtures | 200. | 3000 - 3600. |
| Shipboard, PVC | 200 - 250. | 3200 - 3810. |
| Aluminum | 100 - 300. | 3800. |
| Galvanized sheet | 120 - 550. | 2000 - 6000. |
| Ceramic | 190. | 3600. |
| Polymer, central | 450 - 470. | 1000 - 1130. |
Cutting metal products is made on special equipment. Alone to cut and clean it difficult. Therefore, specialists in the store make calculations for inexperienced masters and cut the entire profile in size from 80 mm in length.
When sheeling with natural wood, the plank is easily joined with the subsequent sealing of the seams. Therefore, for calculations on the area is enough to add 5% on the cutting.