Such popular bracelets are those that weave with the help of Paracon. This rope is tight enough, so used to be used in military activities to mount the parachutes. But such a rope can now be used not only for military purposes, many hunters material apply in their business. In addition, this material has become very popular in the weaving bracelets from Paracon. Thanks to a special weaving and a light scheme, such accessories can be weave independently without any problems. Because of its strength, the product is quite durable.
Basically, many people weave such bracelets as a symbol of survival or friendship. This is due to the fact that it is the bracelet that woven from such a rope will help in extreme situations if it is broken. After all, it is precisely a robust rope that will always be needed at the moment when a person is in serious and life-threatening situations.
Decoration "Cobra"
In this master class, we will learn how to weave the bracelet "Cobra" with a plastic clasp. This type of weaving is perfectly suitable for people who are engaged in mountaineering or other types of activities, where we need a rope. In addition, such an accessory will emphasize the nature of the extreme person and point to the lifestyle that he leads.
What we need for such a bracelet:
- Two colors of Paracona;
- tape measuring;
- scissors;
- selected clasp;
- Match or lighter.
The following presented instructions for weaving the bracelet.
At the very beginning of it, it is necessary to connect the two tips of the rope with matches or lighters, then you need to fasten the fastener on both sides, look at the photo below. Further we need to adjust the length of the rope for the future bracelet. And so join all other colors.
Now let's start weaving, it is such a bracelet of two ropes very comfortable to weave. This is due to the fact that one color of the cord will always be leading, with this lace always begins the nodule. In the master class it will be a lace of red.
Article on the topic: Master class on doll with welcome with their own hands with photos and video
Now we need to turn all the nodules well, thus we ride the entire length of the product, as indicated in the photo below. When weaving is brought to the end, deploy the bracelet and we do the same weaving in the opposite direction, it will be done from above the same bracelet. As a result, this product will get quite dense. It should be understood that the length of such a rope should be twice as much. Caller the tips of the rope will be like this: We do the tips of the rope through the clasp crossing (it is possible to perform with a tweezers or other convenient tool), we need to trim and cut the tips with a lighter.
You can use other colors and different Paracona thickness. In addition, such bracelets can be made without a fastener, which makes it easy to make the work of weaving and savings in the materials.
Bracelet for watch
Many people prefer to wear wristwatches that must have a bracelet. And why then such hours do not make original and do not fulfill the same bracelet with your own hands? In addition, bracelets performed by personally interesting and original. Moreover, materials from which modern straps perform will not always be durable, especially fabric, leather and gold. And then you can lose your favorite watch, which will not please anyone. Therefore, this master class features an option as you can make an original bracelet from nylon parakord. This material is quite durable and steady, which will allow you to wear a strap for a long time.
Knit strap for hours. We need:
- Hams themselves;
- Parakordovaya size rope in 1.5 m;
- scissors;
- measuring tape;
- lighter;
- clasp;
- Surgical and plastic clamps.
To start weaving, at the very beginning it is necessary to measure the length of the wrist and after measuring the necessary for our rope. For this, a parakord rope must be folded in half, lay 50 cm. Next, we must connect with a plastic clamp. After, we need to open the clamp, stretch the cable through the hole, which is in the clock, and make a loop on the second clamp, namely at the same distance, as it was on the first side. This is done by another time, after that we must get four ropes from two sides of the clock.
Article on the topic: Knitted toys
In order to make such a bracelet, you do not need to be a specialist, but only you need to have a little patience and be more hardy. Then we weave the bracelet yourself. For this, we leave a short cable aside, take and work with a long part. We need to start a large lace under two central ropes, after which make a nakde on top of the extreme rope, return from above the middle cable in the opposite direction. We look at the photo below how it is done.
And also weaven further in the same order.
At that moment, when weaving approaches the clock, stretch the rope through the soup of the watch and now begin to weave the second part of the bracelet on the other side. Using the clips of the surgical (you can take another suitable tool) it is necessary to pull the tip of the cable through the loop in the plastic clamp, but you do not need to cut off unnecessary.
Now you need to make sure that the strap is well sitting on the wrist, and in the case when the bracelet sits tightly or presses, it is necessary to send cables, only after that we can cut off unnecessary pieces.
Further, in 3-4 median loops fill the rope, and what will remain, you need to trim. This must be done on two sides of the straps made, after it is necessary to fall the rope tips, it is done so that the tips do not dismiss.
The way it should look like a product is visible on the available photo below. Now our bracelet is ready. From this master class it can be seen that it is possible to make this strap without difficulty. With such a bracelet, the clock will not lose and serve for a long time.
Video on the topic
This article provides a video selection with which you can learn to make bracelets from Paracon.