In the design of the interior, the details are of great importance, it is they who create that cozy home atmosphere, which is so nice to spend time with the whole family. The frame on the wall made by their own hands from the girlfriend, not only decorate the home, but also brings it into it some highlight and individuality. Such products may well compete with the works of designer art.
To decorate the interior of the house, it is not necessary to buy expensive paintings, the frame can be made with their own hands, having a little patience and fantasy.
How to make a frame from the ceiling plinth?
It will take:
- ceiling plinth of expanded polystyrene;
- Universal polymeric glue;
- Putty on the acrylic tree;
- sharp knife;
- protractor;
- acrylic paints;
- Corrugated cardboard (box from household appliances).
From the wallpaper, a suitable picture is cut and pasted on the ceiling slab, which should be 1 cm. Long picture from all sides.
Make frames on the wall can be from corrugated cardboard and ceiling plinth. First of all, you need to cut the template of the future frame. A rectangle is cut from the corrugated cardboard, the window is cut into the center for a photo or picture. The size of the product will depend on the parameters of the image you want to arrange into the frame. For this pattern, the same rectangle is cut out, but the window makes more than 5-8 mm on each side, the parts glued together. Thus, it turns out a place to insert the picture. If the frame is made under glass or subframe, you will have to cut another 1-2 cardboard rectangles with an extended window and glue them to the blank from the reverse side (it all depends on the thickness of the inserted image).
After the basis is ready, proceed with the decoration of the frame with the ceiling plinth. The ends of the baguette on each side are cut off at an angle of 45º. With the help of the transporter, draw the angle and the cut line on paper on paper, put a bar on it, make a mark on it, then cut the sharp knife, you will need 4 parts. Stick baguettes on the blank from the cardboard from the front side. If you have got the gaps in the corners, then you should not be upset, this error is easily corrected using putty and paint. The work is left until the glue is complete.
Four parts for the frame are cut out of the ceiling plinth, in length, a little exceeding it.
Next, it is necessary to sharpen the places of connecting a baguette with a cardboard blank, as well as the angular seams and the opposite side of the frame. It will give the product extra strength and will hide all flaws. The outer side (ends) of the frame will have to put several times with the mandatory intermediate drying and grinding each layer using sandpaper. But you can go and other way. For example, incur between cardboard and baguette (on the end side) strips of foam, then sharpen them.
Article on the topic: Turquoise curtains in the bedroom or living room
After the putty is dry, proceed to painting. For this purpose, it is best to use acrylic paints or a water-emulsion. In order to paint the frame in the dairy shade, you need to add a little ocher into a white paint. If you want to make a dark frame, then take the black paint and mix it with red and dark brown shades. After painting, the product is covered with water-based varnish.
It remains only to make the mount, for this take a dense twine, cut 10-14 cm. From a dense thin cardboard cut out a 5x7 rectangle, see the rope on the opposite side of the frame, apply glue and glue the cardboard, press the cargo to complete dying. Frame on the wall is ready!
Frame on the wall of newspapers
The parts made from the ceiling plinth are cut off by the defect and the glue are joined with each other.
It will take:
- old newspapers or magazines;
- adhesive pencil;
- stationery knife;
- protractor;
- PVA glue;
- white acrylic paint;
- Wood putty;
- Universal glue.
The frame on the wall made of newspapers is not much different from purchased baguette. As a result, the product is fully strong, and in appearance it is difficult to guess, from which the frame is made. First of all, you need to stock material, for this purpose you can use both newspapers and fine magazine paper.
The newspaper is unfolded, placed on a flat surface, after which they begin to turn the dense tube. In order to get a frame that is thorough, it is necessary to use several newspaper sheets. When the tube is almost minimized, a new newspaper is lined with a adhesive pencil and continue to work. It is important to twist the newspaper with the same density, otherwise the details are obtained from different thickness and it will be difficult to connect.
After drying the glue, it is necessary to paint the frame of the aerosol paint of silver or gold color.
The frame consists of 4 slats, for one hand, it will be necessary from 3 to 8 tubes, which glue with each other in the form of a triangle (the more details, the wider the frame will turn out). To obtain a narrow baguette, take 2 tubes, glue their side sides. Then stick 1 more from above, thus the triangular cross section is obtained. It is necessary to make 4 billets, leave them until the glue is complete (for a day).
Article on the topic: Frameless furniture with your own hands: Frameless sofa
Next, it is necessary to cut every bar at an angle of 45º from 2 sides, for this it is best to use a stub, but if there is no such device in the farm, you can do the usual transport. Take a sheet of paper into the cell, draw the square, then connect its corners with diagonals, put the bar on the markup, with the help of the transport and pencil, do the line and cut everything too much.
Now it is necessary to glue the details at an angle of 90º. First, they connect 2 sheets, after their drying glue the remaining corners.
For a larger fortress, you can glue a wooden spike in one side of the angle (for example, toothpick), and to another - to do the groove with sewing.
The slots between the corners close using a wood putty.
After the frame is assembled, it is necessary to make a place to insert the picture from the opposite side. For this, 4 tubes are glued, retreating 5-8 mm from the window. At the same time, make a device for fastening the frame on the wall. With the help of sewn pierce 2 holes in the upper tube, which is designed to insert the pattern, they make a wire in them in such a way that the loop is formed.
Now it is necessary to progress the product, it will give the frame an additional strength. For the soil, they take 1 part of the water, add 2 parts of PVA and as much white acrylic paint (can be replaced with a water-emulsion), stirred to a homogeneous consistency resembling a liquid sour cream. The product is ground 2-4 times with intermediate drying. Glue impresses the frame and make it solid, and white paint will block the typographic font. After that, the framework paint acrylic paint in any favorite color and covered with water-based varnish. Insert the picture from the reverse side of the frame, fasten with small cloves or stationery tape. With such a framework, any wall will play new paints.
How to make an oval photo frame?
It will take:
- Dense cardboard;
- Old newspaper (magazine);
- twisted cord;
- Gold paint in the balloon;
- acrylic paints;
- scissors.
The convex details of the frame can be toned with acrylic paint suitable color with a sponge.
Make a frame on the wall for photos simple enough. You need to take a tight cardboard sheet, draw oval, outline in the center of the window under the image, then everything is neatly cut. The billet for the frame is ready. Take the newspaper, remember it as it should, then burst into pieces and enclose the frame. Edges Wrap on the wrong side and tide. The more folds you get, the more interesting the texture of the frame after painting.
Article on the topic: The electricity meter burned down: what to do
Then take the cord segment and glue it along the image window, thus it turns out a beautiful edging. The place of connecting the ends of the twine and part of the frame must be reappeted. To do this, cut the newspaper (diagonally) on thin stripes in 2-3 cm, then roll them on the helix and twist the roses, stick them to the frame. You can also use lace, buttons, coils from threads, vitua wire and beads. The main thing is that the composition looks good and did not lose the frame.
Take the gold paint in the canister and paint the product together with the decor, leave until a complete burden. After that, mix the black and brown acrylic paints, paint the edging of the window and the places where the mint of the newspaper was glued. After about 10 minutes, we will erase the paint with a damp cloth in such a way that it remains only in the recesses of the folds.
It remains only to make pockets in which the photo will be inserted. To do this, take a tight cardboard, cut the rectangle. It must be glued to the opposite side of the frame from 3 sides, the side part should remain free, through it and the photo will be inserted. Make a loop from the rope when you stick your pocket, insert it between it and the main part of the frame. If the wall is smooth, then instead of the attachment you can use double-sided tape. Designer frame on the wall is ready!
Decorating Frame in the style of "Terra"
It will take:
- billet from fiberboard;
- PVA glue;
- acrylic putty;
- Dry herbs and colors of an interesting texture.
The frame on the wall in the TERRA technique will become a real interior decoration. To do this, you will need various dry spikelets and flowers that have a beautiful bulk form. With the help of the jigsaw cut out the billet under the frame, the edges are sanding with emery paper. After that, load the surface with PVA glue several times.
Instruct the acrylic putty PVA glue in proportion 2: 1, please add some water if necessary. There should be a mass that resembles the dough on pancakes or thick sour cream. Apply this mixture on the frame, then put drywheels into it, cover them with the same mass, leave for a few days until complete burials.
After that, let off the convex places of diluted brown, light lilac or gray paint. Secure the result with an aerosol varnish. Make a pocket for a photo can be exactly the same as described above. This framework will not only decorate the walls, but also become a highlight of your interior. It is not necessary to follow these instructions exactly, show fantasy, create, and everything will succeed!