The chief attribute of New Year's celebrations is a Christmas tree. Depending on its preferences, people decorate the rooms with artificial wood or natural fir and pine. To install the latter, you must choose a stand. It can be bought or building a universal model that will serve you not one year, and which will be able to keep different on the diameter of the trunks. Make a stand for the Christmas tree with your own hands is not very difficult. To do this, you will need a simple and minimum list of tools and girlfriend. The main design you can improve at will.
Materials
For the manufacture of the stand you will need:
- 5 x 10 cm boards;
- ry-bolts;
- washers;
- nuts;
- nails;
- self-tapping screw;
- Metal bowl;
- a hammer;
- drill;
- meter;
- Horn wrench;
- hacksaw or saw;
- Paper and pen.
Step 1 . First, imagine how your project will look like. Draw it on paper to understand what details you need and what measurements you need to produce.
Step 2. . Measure the diameter of the tree base and the height of the bowl that will be needed for watering. In this project, the diameter of the tree was 7.6 cm, and the height of the Christmas tree is 2 meters. The height of the metal bowl was 11.5 cm.
Step 3. . Cut the tree bars. They will need eight pieces. Four of them will serve as a support for the Christmas tree. The length of them will be 46 cm, and four more are supports, the length of which in this case is 22 cm.
Step 4. . Supports and parts of the base stand can be built. To do this, you can use selflessness or nails. In this case, the preference was given to the last. Watch your boam blanks formed a straight angle.
Step 5. . Collect the design as shown in the photo. Tighten all parts by self-drawing. For this work you will need an assistant, since the supports must be connected to each other exactly. Please note the gap dimensions that you get should proceed from the wood diameter. You can leave a small stock.
Article on the topic: Openwork Angels Crochet. Schemes
Step 6. . Drill drill holes for fastening ry-bolts. Insert the bolts themselves in them, securing them with nuts and washers. If the calculations were produced correctly, your design, as a result, should look like this. In a bowl you will need to pour water so that the tree stood longer.
The tree trunk is inserted into the middle of the stand, and for the reliability of the attachment is clamped with ry-bolts. Ask home to help you christmas tree. It is thoroughly fasten the bolts and check that the tree stood stably. You can decorate your New Year's Beauty.
This stand can still be improved, especially if the place where you are going to install it, has a slippery coating. In this case, to base, attach pieces of anti-slip materials.