Recently, rolling shutters are becoming increasingly popular, which are installed in the toilet. This is the most convenient option in order to hide the pipes - this is evidenced by feedback from people who have already established such rollers. A big advantage when installing such blinds is that with sudden repair there is no need to break the wall or shoot a tile. It is enough to raise or omit the cloth, and you can get easy access to the pipes that you need to change or repaired.
Roller shutters in the toilet
When choosing a roller shutter for a bathroom, it is necessary to remember that they have their own characteristics, since with constant finding in a humid environment it is possible to occur mold on ordinary products. Considering this, a special antibacterial foam is used for plumbing rolls.
Cabinet for boiler
You can choose the color of these products for the coloring of the interior, these products are also available with a pattern. Since the coating is carried out by powder paint, withstanding high temperatures, and varnishes, then due to this, the magnificent view is saved for many years. The manufacture of plumbing rollers is made of aluminum, so the appearance of rust is excluded.
Varieties rolling shutters
So that access to communications is free, and the hatches or doors did not occupy a free place, the best solution will be the installation of roller blinds. Since the bathroom is usually a room that occupies a small space, then the area is saved at the installation of rolls. Distinguish several types of products:
- with a hidden box;
- with visible box;
- with a fixed bottom.
It looks in a closed form such blinds are very elegant, and in the open it does not occupy places. The minimum sizes of the box can be 13.7x13.7 cm, and the maximum 15.0x15.0 cm. Depending on this, it is determined if you can hide the box or install from the outside. The fact is that to communications must be at least 15 cm so that the invisible box can be installed.
Article on the topic: Recommendations for finishing the corridor MDF panels
Most often, the installation of plumbing roller shutters is made right behind the toilet, and they close the entire plane from the ceiling to the nose itself. The drain tank and the sewage pipe, which is behind the toilet, are a hindrance. To solve this problem, you can make a roller shutter from two parts: the lower remains still, and the upper opens, so that the counters and cranes are in the access area. To open it is enough just to push the cloth up, and to close - pull down. The fixation of the upper cloth of plumbing rolls is made by latches and is at the level of the tank.
The lower part is also mobile, but for this it is necessary to completely raise the upper part, and then pull the lower one. In a roll, which is located below, be sure to cut holes for the sewer tube and for the flow of water to the tank.
Installing rollerwood
Since most rolling shutters produced today have a spring mechanism, then the tapes for fixation are not required. That is, it is not necessary to go on opening and closing. This design is very profitable and convenient for older people. Electric motors that are installed on plumbing rollers have a reduced size, due to which the control can be made using a button or remote control.
As can be seen in the photo, mount rolls can be installed together with the tile laying, but they can also be installed after the end of the repair. By ordering blinds for the toilet, you can choose a different color, but mostly these products are produced:
- white,
- beige,
- silver,
- brown,
- with drawing.
The dimensions of the rolls themselves can be different - it depends on the space where rolling shutters in the sanitary wardrobe are installed. Feedback from people who have already installed such products say that it is very convenient, beautiful, especially blinds with a pattern, and inexpensive.
Looking rollers will be perfect if there is an absolutely smooth coating of tiles on the walls. Otherwise, gaps that have to be embedded with sealant can form between the wall and guides. In connection with this, the best option will make the installation of the blinds before the tile is laid out. The best option is the one in which the box is invisible, that is, is located inside the plumbing cabinet. At the same time, the toilet looks great, especially if shutters with a pattern are installed.
Article on the topic: How to choose tulle with lambrene on the windows
Montage of roller blinds in the bathroom with his own hands
Before installing rollers yourself in the toilet, it is necessary to make measurements. It is required to determine the size of the length, the widths of the blinds themselves and the depth, if it is possible to install an invisible box. After that, it is necessary to shock and attach the openings to eliminate the presence of cracks and protrusions. The installation of the box is performed above the upper part of the opening, as can be seen in the photo. This option is used most often, since it is easier to mount it, and any drives can be used for it.
Used to control rollers or spring-inertial mechanism (PIM), or a tape that will be visible. To establish blinds to the toilet with your own hands, you need to be very neat, as the reviews that the owners left, they say that the independent installation is very complex. Suggested rollers can be seen in the photo: they look very beautiful, especially those that with a pattern.