The bathroom is, undoubtedly, the face of the hostess, so everything in it should be not only neat and clean, but also beautiful. Sometimes it is difficult to choose a basket for linen so that it combines with a common room design so that things do not look out of the holes, so that, finally, the basket pleased the eye. The ideal solution to this problem will be the created laundry basket with their own hands. The result of such a creative process will be not only a useful thing, but all those positive emotions that will bring it to use.
Braided from newspapers
If the houses have accumulated the collections of newspapers for a long period, then you can give them a second life by making a basket of newspaper tubes.
So, to make a basket of newspaper, you will need:
- Stack of newspapers;
- varnish;
- The subject that will be fattered;
- line;
- scissors;
- pencil;
- Thin knitting needles;
- PVA glue.
For the manufacture of a wicker basket, you need to prepare newspaper tubes. On the newspaper sheet, the strips should be placed 7 cm wide and cut them.
Then you need to put a thin needle on the edge of the strip at an angle of 30º and wrap it into the newspaper.
The tube should not be obtained too tight or weak. The end of the strip must be fastened with glue.
After the end of the tube is fixed, you should remove the needle. Then repeat the same with other stripes.
Finally, to make long details, you need to connect the tubes in two, inserting one to another and sneak the connection site, as shown in the photo.
Now it is time for weaving from newspaper tubes bottom baskets. To do this, take 10 ready-made details, 5 of them put in front of you, press the line. Then 3 odd tubules bend through the line up, on the remaining elements drop glue. Take 6 tube and perpendicular to glue it to them from above. After that, it is necessary to lower the raised tubes, do the same, but raising even parts, and 7 tube to stick to odd.
Article on the topic: Envelope for money: Scrapbooking for beginners in a master class
Continue to weave until 10 tube is glued. Then you need to take the upper horizontal tube, bend it 90º and spend between the other details as in the photo.
Continue sprout in a circle, spreading parts to the parties from the center. When the circle of the desired diameter is formed, the ends of the tubes should be cut.
Now, on the bottom of the future basket, you can put the form - it can be any thing of a suitable size, it will be the basket that will be placed.
The coarse ends of the tubes, from which the bottom was woven, should fit tightly to the form. Now the main part of the work is to be: making the walls of the basket! To do this, take the tube and intertwined it perpendicular to the rest of the details. The end of the tube should be fixed with glue, and then take a new part and continue.
When the desired height of the basket is achieved, you need to fasten the ends. To do this, you need to cross any axial tube through the neighboring, bending the inside. In the loop insert a separate tube. In this way, get inside all the ends. Extra trim.
Finally, for strength, it is possible to miss all the product with glue, and then top covered with varnish.
On a note! Making basket for linen opens limitless features for experiments. For example, you can cover the acrylic paint newspaper tubes in advance and weave the multi-colored basket.
The second life of the covers
How for sure to surprise guests and at the same time give the second life with covers from plastic bottles? Create for a bathroom. Contemporary laundry basket made of covers! In addition to patience, you will need:
- many covers;
- Glue for plastic.
First you need to collect the bottom of the future basket: lay out the covers in the form of a circle or square depending on which form will be the product.
Then, when the bottom is posted, you need to tightly glue the lids to each other with plastic glue.
Article on the topic: Butterfly Wings | Paper: Master Class Decoration for Dolls
On the principle of brickwork, lay out the walls, gluing the plugs with each other.
Tip: You can separate the covers in advance depending on the color and lay out them with a pattern. And if on the same principle create a shelf for the bathroom and soap, then you will get a whole set that gives your design a highlight.
Knitted miracle
Those who love and know how to knit, will be interested to know that the laundry basket can be hooked!
For the manufacture of knitted basket you will need:
- Ribbon yarn - 500 g;
- Hook number 10.
Knitting density will be 8 tbsp. b / n = 10 cm. To make such a thing, you need to dial 4 plants. Clause and close the ring with a semi-roll. Then:
- 1st row - in the center of the ring to bind 8 tbsp. b / n. Next knit on the spiral b / n columns.
- 2nd row - bind 2 tbsp. b / n in each loop of the previous row = 16 tbsp.
- 3rd row - knit * 1 tbsp. B / N, in the next. The loop of the previous row bust over 2 tbsp. b / n *, repeat * _ * 7 more = 32 tbsp.
- Continue evenly add in each row of 8 tbsp. Until 68 p. (Circle diameter - 26 cm.).
Next to knit without additions by the b / n columns as follows:
- * 2 rows, capturing the hinges for the rear wall *.
- Repeat * _ * to the desired height of baskets.
Finally, tie up the top edge of the basket 1 next to the floor.
Tip: You can unsubscribe handles for a basket, then it will be comfortable to raise. In addition, you can use multi-colored yarn so that the basket is bright and original.
Other ideas
For the needlewoman there are no things, of which it is impossible to do something. That is why the material for the basket in the bathroom can become anything! Based on the proposed master classes, using other materials, create a real masterpiece.
For example, cut from cardboard and glue the basis for the basket. You can use the finished scheme or calculate it yourself.
Article on the topic: The jacket with smear spokes from mohair with schemes and photos
Another option is a basket out of the box, which can be placed, for example, a rope or clumsy. Baskets from the rope and from the fabric look very stylish and fit into any interior.
To make storage for linen from twine, it is necessary to arm it with glue and, tightly connecting and gluing the twine on the helix, make the original part of the interior. The tip of the twine can be fastened with glue or decide the ribbon.
Video on the topic
From the proposed video, you can learn how to make a laundry basket from plastic bottles, from wood, from plywood and even from the vine!