Large, lush and beautiful artificial Christmas tree you can do yourself. Its form can be different, which will depend on the technique of making a frame for wood. We will demonstrate you four master classes, stepwise showing how to make a New Year tree with your own hands.
Master class number 1: Christmas tree from artificial branches
From artificial spruce branches, you can make a Christmas tree, the height and pompness of which you can adjust yourself. The manufacturing process itself, if you have a ready-made wire frame, quite simple.
Materials
To make a New Year tree from artificial branches you will need:
- Wire frame;
- fir branches;
- garland;
- nippers;
- cable ties;
- Magnificent bow or tape.
Step 1 . To begin with, make a wire frame. The beautiful base for the Christmas tree will serve lattices for tomatoes that are sold in the form of a wire cone. If the tree you need a large in height or less than the original lattice, you can change it a little. For smaller in the size of the Christmas tree, part of the rings and wire you need to remove, and to make the Christmas tree more, align a few lattices, inserting one to another.
Step 2. . On the resulting pyramid grille, fasten the cable tie to the bars form a sharp angle.
Step 3. . For the decoration of the Christmas tree, wrap the wire lattice with artificial branches, if they, as in this master class, are made on a wire frame. If your branches are softer, fasten them with cable ties, biting them ends.
Step 4. . Fully form a tree, laying the artificial fir branches from the bottom up tiers, not leaving spaces.
Article on the topic: Gerbera from Foamiran do it yourself in a lung master class
Step 5. . Decorate the Christmas tree with a garland, and on the very top of the tree, lug the lush bow from the tape or the fabric of the contrasting color.
Your New Year tree is ready. Leaving the sharp ends of the wire at the bottom of the wire frame, you can install the Christmas tree in the yard. Without them, the Christmas tree will be steadily standing on the floor in the house.
Master class number 2: New Year tree from white tinsel do it yourself
Based on the entire wire frame for vegetables, you can make the original snow-white Christmas tree, which will resemble the trees stipulated by snow.
Materials
For the manufacture of a Christmas tree from white tinsel, cook with your own hands:
- Wire frame for vegetables;
- dense stationery;
- lush tinsel white color;
- Scotch or white cable ties;
- Original decorations for the Christmas tree or garland.
Step 1 . Purchasing a wire frame for vegetables. For this, the rods are connected at the top with the help of a dense stationery. It is advisable to take a light color gum so that it, in the end, merged with the Christmas tree.
Step 2. . Start wrapped with a lush mishur-shaped wire frame. To do this, the end of the tinsel will fix with a small piece of scotch or cable tie in the top of the wire frame.
Step 3. . Top do the most dense. In places of contact with Mishura with wire, you can additionally mount the decor with a piece of scotch or cable ties of light color.
The latter carefully cut off so that they do not stick out of your product. Do not forget to secure tinsel at the bottom of the wire base.
Your Christmas tree is ready! Now you can decorate it, it will be interesting to look at such an unusual Garland Christmas tree or original decorations in the same cold colors as the tree itself.
Master class number 3: New Year tree from Makaron and Mishura do it yourself
If you like unusual New Year's crafts, you can safely try to create a similar one. The process of making a Christmas tree is able to capture not only you, but also your children.
Article on the topic: Gorodetskaya painting for beginners on a tree: Patterns with photos
Materials
To make a New Year tree from Makaron and Mishura do it yourself, you will need to prepare:
- macaroni feathers;
- Large sheet of paper or watman;
- stapler;
- scissors;
- chopsticks of hot glue;
- thermopystole;
- Dense cardboard;
- tinsel green color;
- Christmas balls;
- Star for decoration.
Step 1 . Make a blank to create a New Year tree. To do this, turn a tight sheet of paper with a cone, and the edges will fix it with a stapler or glue. The bottom of the cone do trust so that it stood steadily on the table.
Step 2. . Place a tight cardboard sheet. It will be needed to protect the surface from paint.
Step 3. . Using hot glue, attach macaroni feathers to the base-cone. Place them down in the form of a snake, place pasta tight enough.
Step 4. . Cover the whole billet with a thin layer of golden color paint from the canister. If necessary, apply the second layer.
Step 5. . After the paint is dry, in the top of the Christmas tree, fasten the end of the tinted glue with hot glue. Start wandering the heart of the Christmas tree on the helix. At the bottom of the cone, also fasten the tip of tinsel with hot glue.
Step 6. . Decorate the Christmas tree with toys and garlands. You can leave it in this form, it is ready.
If you wish to turn it into a similarity of Topiaria, in the base of the cone from the cardboard, glue a round blank. To her hot glue, attach a wooden wand. Set the wand itself in the vase filled with plaster, gravel or plasticine. The top of the filler for the vase is definitely re-adjust. Your original pasta is ready.
Master class number 4: New Year tree from wire and tinsel do it yourself
Making a Christmas tree from tinsel on a wire frame, demonstrated in this master class, is slightly different from what was shown earlier. In this case, the Christmas tree will most resemble natural as possible, imitating her paws.
Article on the topic: Teddy bear, giraffe, protein and elephant Amigurumi
Materials
In order to make a New Year's Christmas tree from wire and tinsel do it yourself, you will need to prepare:
- Lush tinsel;
- Wooden dowel, a piece of bamboo or a thin PVC pipe;
- Stand for ate;
- nippers;
- scissors;
- round-rolls;
- garland;
- Christmas decorations.
Step 1 . On paper, make an outline of your future Christmas tree. Initially, schematically depict it in the form of a cone. Spend the center axis inside the figure, and then set aside and by scaling and determine the length of the paw in all tiers: from the bottom to the top.
Step 2. . Around the wooden spanks Start fixing the wire, imitating the branch characteristic for the real ate. Form, thus completely all fir.
Step 3. . Using hot glue or tape, attach tinsel to the resulting Flash Frame. Wait with dense twist winds around each piece of wire, and then around a wooden base.
Step 4. . Install a wooden dowel in a stand for ate.
Step 5. . Decorate the tree with christmas balls and garland.
Fir ready!