Are you still used to keeping bread in plastic bags or in a paper wrapper? Perhaps it is worth thinking about a special container - bread. Having come to the store, we see the same modern range almost one template. Want something special? Then the woven bread bed of newspaper tubes is exactly what you need.
Getting to work
First of all, old newspapers or magazines, the needles of various diameters, PVA glue, acrylic varnish, a variety of paint for dyeing finished products or individual tubes, water spray gun for humidification of dry strips, brushes of different widths are welcome.
To twist the tube, you need to put the knit on the part of the newspaper sheet at an angle of about 30 degrees, bend the corner and gradually, turning the needles, wind the newspaper.
At the end of the remaining corner, it is necessary to moisten with glue and press the end of the tube so that it does not unwind.
In order to make a long tube, you just need to connect some smaller glue, inserting them one to another. Paper tubes are very convenient to paint in a small rectangular plastic tray with a liquid or immersed in a bottle with a fairly wide neck. You can also perform staining using ordinary brushes, pre-stacked the surface on which the tubes, oilcloth or food film are decomposed.
Initially, it may seem that for weaving need some special skills, but in fact everything is quite simple. Presented below the master class with a step-by-step photo will help to understand the essence of the process.
For the manufacture of bread mines, you need to stock such materials and tools:
- One hundred fifty one twisted tube from magazines;
- eight newspaper tubes;
- PVA glue";
- paper scissors;
- two dense cardboard segments with dimensions 20 by 28 and 18 to 26 centimeters;
- Lovels of thick paper - 2 pieces;
- Fissure rectangle with embroidery satin ribbons or other decor - at will. Its dimensions are 24 per 32 centimeters;
- The segment of a synthet board, folded in three layers - its length should be equal to 28 centimeters, and width - 20;
- paper napkins with color pattern;
- Glue "Cosmofen".
Article on the topic: Hip Hop Clothing for girls and guys: Brands and trends
Corners of a cardboard rectangle can be cut or rounded - depending on the desired shape of the bread bed. On a cardboard basis, 20 by 28 centimeters, we have twenty-eight tubes from magazines. The distance between them should be the same. The entire surface and tips of the tubes should be covered with PVA glue and attach a sheet of dense white paper from above. Then the cardboard base must be flipped upside downward.
We take the first separate journal tube, we turn it in half and intertwine between the bases of the base through one, lifting them perpendicular to the basis. By the end of the working tube, attach the beginning of the next and so on. Thus, to form the walls of the bread bed, we will need to weave fourteen such rows in a circle.
At the end of the weaving the tail of the tube must be cut, glued to the wrong one and leave to push, fixing it with a clothespin.
The ends of the vertical tubes of the base bending the scene at an angle and produce through the walls of the bread box between the seventh and sixth woven rows.
For the strength, we lubricate the whole piece of bread with glue, sticking the tailings on the wrong way to cut.
The cover of the product is weaving on the same principle as the lower part, but this time the basis will serve the segment of cardboard 18 to 26 centimeters, which is not needed to fix thirty journal tubes.
First, you must perform two rows of weaving in the horizontal plane, and then bend the base tubes perpendicularly downward.
For a more accurate matching of parts during the weaving process, the cover is applied to the base comparing the form. After a seven rows of the usual interlacing tube, the style of the "rope" is spilled, thanks to which the neat edge is formed.
To do this, another one is added to each working tube, and the vertical tubes are pulled by pairs of horizontal tubes alternately. The remaining ends are cut and refuel the edge interlacing.
Article on the topic: Migon mittens with knitting needles: master class with a scheme and description
After that, the breadbox can be painted under the color of the wood, cover with varnish. We glue the cover with the cosmofen glue. On top of the synthet board are imposed with an embroidered fabric, sweep the edges inside and all together are also glued along the edges.
At the next stage, we cut out floral motifs from paper napkins, separate the extra layers and glue using a PVA to the inner surface of the lower part of the bread bed and its covers.
The resulting decor is coated with acrylic varnish, we are waiting for complete drying. Breadmaker is ready!
Video on the topic
Well, for beginners to master the technique of weaving from the tubes, these video materials will be useful on the basic principles of work: