To date, weaving from newspaper tubes has gained popularity among skillful needlewomen. Having tried to make the most elementary things, sooner or later I want to do something useful and interesting. Such an occupation brings a lot of pleasure and eventually the necessary everyday things. Beginner masters often encounter difficulties when weaving bending from newspaper tubes. Here in this we will understand today.
There are many different weaving schemes, in this master class, consider several options.
Figure "Roller"
Having formed the desired size of the product, you can proceed to the bending.
It is very important to constantly moisturize paper tubes so that they are elastic and succumbed to the bending.
http://stranamasterov.ru/img4/i2019/06/03/dscn9835.jpg
As you can see, in each rack two tubes. We bring the rack for the second, then before the third and the fourth. In the photo you can consider in more detail.
http://stranamasterov.ru/img4/i2019/06/03/dscn9836.jpg
http://stranamasterov.ru/img4/i2019/06/03/dscn9837.jpg
The second rack is exactly the same, only in another direction. Try not to allow such chances, immediately straighten the tubes.
http://stranamasterov.ru/img4/i2019/06/03/dscn9838.jpg
We continue such a weaving to the end of the row.
That's what you should get.
The pigtail will not be visible in the future, so it can be boldly primed.
Now gradually begin to bend all the risers, as can be seen in the next photo.
Gently refuel each tube.
Do not forget to constantly moisturize the tubes.
Now we cut the ends of the tubes and can be sampled by PVA glue for reliability.
That's ready, it's not very bad for a vase or a lump for sweets.
Another way
Touch the basket until the desired size, proceed to the bending.
To the first rack, add an extra tube and begin to braid each other, as in the photo.
And so to the end of the row.
The second row weaves in the opposite direction.
Article on the topic: Summer bag of crocheted paper raffia
Each nearby rack bend the top.
And the working rack bend down.
We impose on top to the next.
Bending up again.
And so until the end of the row, the last tube we get in the direction.
It turns out such a pigtail.
In the next row, change the direction again, only the risers bend through every two neighboring tubes.
So continue.
And pull out.
So to the end of the row.
The tubes can be slightly sprayed with water for elasticity. Then tighten each tube.
At first glance, it seems complete confusion, but it is easy to understand.
Internal tubes also stretch through every two neighboring.
Stand we bring to the pigtail.
Etc.
The inner part will turn out a pigtail.
Let's refuel the last tubes.
Side risers gently cut off.
For reliability, you can skil the PVA glue. This option bends is very simple in performance and does not require extra fixes and bends.
That's the thing turned out to have a basket.
Inner part.
At the end of the work, the product can be lacquered, then it will last you much more time.
Video on the topic
Look a selection of video about weaving bends from newspaper tubes in a detailed version.