To date, it is becoming increasingly popular with such a direction of creativity as Hand-Made. But indeed, from the most common, affordable and inexpensive materials, it is possible to make works of art, and they will not go to any comparison with crucible jewelry. In the manufacture of crafts, you put a part of yourself, a part of your soul, and this means that your work will not only please you with your uniqueness and beauty, and will also serve as a mascot and protect you and your loved ones from any negative. Unique decorations and wire products with their own hands for beginners to do is very simple, for this you need a scheme and the right approach.
As the story tells us, even its popularity among the rich ladies, having fun decorations, which were made from jewelry wires. For their manufacture, it was necessary to cut off the thin strips from the metal sheet, after which they twisted, and then pierced between two flat surfaces. Due to this, the material was smoothed and did not cling to his hair and clothing.
At first glance, the wire is not completely feminine and elegant material for creating miniature jewelry, but it is not. Due to its flexibility and the possibility of making wires from various material and diameter, not only decorations, as well as the elements of the interior can be made.
Wire types
For the manufacture of the product, it is not necessary to be limited only by copper or iron, because you can also use brass, aluminum, thin steel cable or wire mesh.
Copper. In the manufacture of products from this material, a huge plus is that it is practically no oxidized, which means that it is possible to avoid the appearance of a greenish shade on the product. Also an important indicator is that it is covered with multi-colored paint, so in the manufacture of the desired item you can always choose a shade. And, which is important, copper does not glit. If you make massive decorations, they will not look too cumbersome or coursed.
Article on the topic: Knitted Children's Plaind Spokes Tatyana Chihacheva
Brass. This material is resistant to corrosion, elastic and well bend, so there will be no problems with the impression of the necessary form of the product.
Aluminum. In terms of its characteristics, this material is like brass, the only difference is only in its color. Metal has a shade bluish-gray, which allows you to create products in combination with silver.
Thin steel cable. With this material it is necessary to work very carefully, so as not to get a deep cut, since it is the triggered thin stripes of galvanized metal. Not intended for the manufacture of thin elegant products.
Easy Ring
Master class on the manufacture of a simple ring (also on this example you can make a bracelet).
For this product, we will need wire, pliers, pliers, hammer, as well as the base, which coincides with the diameter of the finger.
It is necessary to wind up a few turns of the wire (the number of turns depends on what width you want a ring). In the opposite direction, tighten the ends to obtain a kind of node.
Gently tighten the edges so that the weaving resemble the flower. When the flower has reached the desired size, cut off the excess wire, leaving the edges of about 1.5-2 cm long. Do not twist the edges by screwing the ring on the sides of the flower.
Bright bird
Suspension "Bird" (with a detailed description in the photo):
For its manufacture, a wire is needed for the base of 1 mm, the wire for the winding of 0.3 mm, a bead of 10 mm, round-rolls, hammer, anvil.
To begin with, we make a loop, for which we will hang the suspension. To do this, it will take to sand the tip of the wire supfyl.
Next, make the looped itself. To do this, we capture the wire tip with round rolls and make a loop, and on the opposite side, we beat off the anvil to minimize irregularities.
Head flexing according to the scheme.
In order to form the beak, bend the wire in the loop.
Article on the topic: Easter eggs with silk tulips
We grab the loop pliers and rotate 90 °.
Bring your nose and bending the belly.
We begin the tail and smoothly translate into the ward. Next, insert the bead and supply the wire.
At the anvil, it is necessary to repel the head, the stomach, the central loop for beads and the tail.
Surplus wires are biting, beat and grind.
To pay thick wire, thin must fix the loop, and then the "nest" for the beads.
Insert the bead, make several turns and wake the wire back into the hole, to return it to its original position.
Take the element to the base.
To complete our product, you need to fool it in ammonia pairs, polish the paste of the goy and cover with varnish.
If you are a novice in the manufacture of wire products, then you should not immediately try to make a complex part. It is better to start with a small and gradually improve your skills.