In many cases, the usual curtains and curtains can be replaced with blinds. They are able to protect the inhabitants of the dwellings from the scorching rays of the Sun and not block the path with a fresh flow of air. Blinds is a device that consists of strips (lamellae). The location of the lamella can be both horizontal and vertical.
The shutter management mechanism is so simple that they can use it with a light movement of the hand. In addition, it is capable not only to open and close the blinds, but also adjust the flow of light. Also attracts a wide range of design in terms of shades and forms.
Benefits
Blinds are universal and easy to use
Despite the great demand for blinds, many do not risk replacing their familiar curtains. We give a few facts that speak in favor of this product:
- Reliable protection from the Sun, especially if the windows come out on the south. To perform this function using a curtain, it is necessary to purchase quite dense material. When closing windows, such curtains completely overlaps the stream of fresh air. In the case of blinds, the lamella turn so as to reflect the rays of the sun, while free air access remains.
- Universality application. Thanks to a variety of design, they can be used both in office cabinets and for decoring the living room.
- Easy to use. If for opening and closing the curtain, especially hard, you need to make an effort, then with the blinds the same process can be performed using a slight turn of a special handle.
- You can use for windows of any type and areas of different sizes.
- The possibility of visual change in the size of the room. Using vertical blinds, visually increase the height of the room.
Features of the device
To date, there are several types of blinds that are divided both on the device of control mechanisms and the placement of lamellae.
Article on the topic: Device and principle of operation of a machine machine
Consider two types of blinds that are most in demand by consumers: vertical and horizontal.
Vertical
Vertical blinds are good where you need to create a cozy atmosphere and soft lighting
The advantage of vertical blinds is obvious. First of all, it should be noted aesthetic appearance and a wide color gamut, which is important for creating a certain interior of the dwelling. Also, thanks to the possibility of adjusting the rotation of the lamellas in the room, a soft scattered lighting is created.
Components of the vertical type shutters are: eaves, a chain for connecting, weighting agents, a chain for control, lamellae and cord for control.
The main element of vertical blinds is cornice. It is made of aluminum or plastic. The latest material specialists are not recommended to use, because over time, under the severity of the blinds, it begins to fake and deform.
In this form, the design mechanism will not be able to fully function. Over time, plastic eaves will yellow and lose its aesthetic appearance.
It is very important to lubricate the guides of the eaves with special lubricant based on silicone.
Nuances use
Choose blinds with durable lamellas and cornice
Let us now turn to such a fact as the extension of the service life of the cornice for vertical blinds. To do this, pay attention to some nuances:
- When purchasing, you must check the quality of the assembly of the cornice. Its mechanisms must function without much effort. Also, the state of the rope should be flawless, it should not be twisted.
- Earth elements should not be weak and thin.
- The width should be determined by the weight of the product. For example, when using blinds with light lamelters from a tissue with a height of 4 m, the width of the eaves should be 3.5 cm, and for heavy plastic, the height of 3 M width is 3 cm.
- Adhere to the rules of operation.
The lamellae assembly must be performed only with their perpendicular location in relation to the eaves.
Choose runners for the best quality blinds.
Article on the topic: Glue for plywood on the screed: how to glue on the concrete floor
Devices with which the blinds are attached to the eaves are called runners. Their quality should be flawlessly, so any bursavar can fill the entire mechanism. With their acquisition, we are always interested in the manufacturer. Made mainly of plastic.
At the bottom of the lamella are connected to each other with a special chain. Most often it is a plastic product, but if you can buy from metal, it will significantly extend its service life.
Device diagram Blinds
Weightlores are also placed in the lower part of the blinds, for the smooth location of the lamellae and preventing their swinging when the wind don.
The rotation of the lamellae to 1800 provides a special chain of control, which is usually placed on the side.
With the help of the control cord, the assembly and disclosure of the blinds. Is accommodated next to the control chain.
Fabric or plastic strips - lamellas are different in width. On how to collect vertical blinds, see this video:
It is recommended for windows of small sizes to acquire blinds with narrow strips, and for large - with wider.
Horizontal
Especially comfortable horizontal blinds on the control panel
The device of the mechanism of horizontal blinds is completely identical to vertical structures. The difference lies in the location of the lamellae. They are not suitable vertically, but horizontally. There is also a difference in the installation method.
Vertical blinds are usually located so that the cornice is attached to the ceiling, and the product itself closes not only the window, but also captures part of the wall. Horizontal structures are most often placed inside the window opening, the eaves mounted to the profile. The width of the horizontal blinds is also different: from 16 to 25 mm.
Mounting process
The design device is simple, and it can be done independently. On how to set horizontal blinds on plastic windows, see this video:
Article on the topic: how to unwind cable with drum
The scheme of the device is as follows:
- The cornice device should be strictly horizontal, so to start checking the surface for fastening. If necessary, align it. Next, perform fixing brackets with a dowel. The holes for them are pre-dried.
- Attach the cornice to the brackets with the help of special latches, which are provided on the brackets.
- We continue to work and attach the eaves of the lamella with the help of special runners. Here it is necessary to observe a strict sequence and hang stripes just as they are folded in a roll.
- Next, the weightlifier is inserted into each strip and the connecting chain is attached. For this, special latches are arranged on every weightlifter on both sides.
- At the final stage, once again check the correctness of the placement of the elements and check them in action.
With the right installation, the lanes should work smoothly and easily. If, when checking the elements, you will stop, you should check the device vertical blinds again.
Control mechanisms
Depending on the mechanism, the blinds can be moved to the center or to the edge of the window
Depending on the established shutter management mechanism, the construction assembly may occur in various ways. They can move to the center of the design or, on the contrary, move away from the center to the sides. Can be collected both by the management mechanism and from it.
With the control mechanism you need to decide in advance. For this, many factors are taken into account, ranging from the overall interior of the premises and placement of furniture and ending with their own priorities.
For example, if the furniture is placed next to the window, it will be correct if the blinds will move precisely in their direction. In this way, the space of the room is visually increasing.
So, choosing the type of blinds, first of all, should not disrupt the interior of the room, since these designs are not only protected from sunlight, but are an integral part of the coziness and comfort.