Modular origami became a very popular origami type in our time, and not only children are fond of this technique, and adults very often began to be interested in this topic. Since the cat is one of the most popular and beloved animals, we decided to hold a master class on a cat in the technique of modular origami. It will be the most popular homemade pets: Cat Ryzhik and Cat Lisone. Cat assembly scheme (modular origami) will help quickly master the technique.
Cheeky sucping
We invite you to consider the scheme and algorithm for the manufacture of a cat's cat.
For this handsome, we will need 480 modules 1/16 sizes, for chin and cheeks you need to manufacture 44 modules with a size of 1/64 and 74 module 1/32 for tail.
1) We will start with the front paws.
2) For the first row, take 3 modules and put them on the short side, for the second row ─ 2 modules. And so it will be necessary to alternate 18 rows.
3) For 19 rows, take 3 modules. And on the 20th row we connect the paws of our cat together, it will take 20 modules for this.
4) Then we alternate 5 and 6 module 6 more rows. For the 27th row, take 4 modules, and for the 28th ─ 5 modules.
5) Further from the 29th to the 33rd alternate 4 and 5 module, and from the 34th 39th ─ 3 and 4 modules.
6) From the 40th to the 42nd row, an increase in 1 module begins on each row. And on the 43rd row, take already 8 modules for the 44th row ─ 7 modules, and for the 45th ─ 6 modules. Now we make each eye separately, alternating 2 and 1 modules. Here is the front and ready.
7) Then make the back, starting too, from the paws, from the 1st to the 4th row alternate 3 and 2 modules.
Article on the topic: Types of yarn for manual knitting needles or crochet with photos
8) In order for the footsteps, you need to insert 3 modules in the reverse side at the bottom.
9) For 5 rows we take 3 modules, and on the 6th row we connect the legs, you need 5 modules for this.
10) After the paws were connected, start from the 7th to the 18th row alternate 6 and 5 modules. From the 19th to the 23rd ─ alternate 4 and 5 modules, and for the 24th, take 3 modules. After that, the back is ready.
11) Now we need to give the desired bending of the front and back to our handsome. To do this, take PVA glue and lubricate them the inner parts of the items, and leave the neck is still flexible.
12) Secure these parts with toothpicks and leave to succumb.
13) And now we go to one of the main details of the cat ─ it is his face, which begins with the ears. We collect 2 parts: 1st row ─ 1 module, 2nd ─ 2 m., 3rd ─ 3 m., 4th ─ 4 m., 5th 3m., 6th ─ 4 m.
14) To make a forehead, take 3 modules.
15) Take 10 modules and connect the ears with the forehead. And we assume that this is the 1st row.
16) For the 2nd row, take 9 modules for the 3rd ─ 10, and starting from the 4th row, we reduce to one module from each row to 3 modules per 10 row. Do not forget to squeeze the muzzle from both sides in order to have the right form.
17) Now we make cheeks, we will use modules with a size of 1/64: 1st row ─ 2 modules, 2nd ─ 3 m., 3rd ─ 4 m., 4th ─ 5m., 5th ─ 3 m., 6th ─ 2 m., 7th ─ 1m. And for the chin, we also take modules 1/64: 1st ─ 2 m., 2nd ─ 3 m., 3rd ─ 4 m., 4th ─ 5 m.
Article on the topic: Paper cornflowers with his own hands: Master class with templates
18) Then start collecting a muzzle using ready-made eyes and spouts that can be bought at any accessories store. We glue them to silicone glue.
19) We collect a tail using 1/32 modules, we need to collect 28 rows, alternating 2 and 3 modules. And finish this: 29th row ─ 2 modules, 30th row ─ 1 module.
20) So we have done the greatest job, it remains only to collect all the details and secure them with toothpicks and glue.
21) A mustache for a cat can be made from paper.
22) And all the toothpicks that are visible, cut off.
Here is our redhead and ready!
Cute kitty
And now we present to your attention the cat assembly scheme Lisone.
1) To begin with, we will need to assemble the circle of 50 modules that will be interconnected.
2) Subsequent ranks collect on the same principle in a checker order.
3) Next, it is necessary to insert 3 white modules.
4) and the following 11 modules collect on the same principle, and after the number of 15 modules are already in the row, it will be necessary to reduce their number. Then the rounding will be obtained, and the manufacture of the body is completed.
5) Now we proceed to the collection of cats cats from the modules. We form a row from the modules by inserting them into each other alternately. Insert the 3 modules of white and then we start forming your cheeks and head, as shown in the figure.
6) Modules form gradually, in the last 3rd rows we reduce 3 modules in the last row so that 41 modules are obtained in the last row. And after that we form the ears.
7) In order to assemble the tail, you need to form a strip from the modules and to bring it in the right direction and attach glue.
8) For the face of our beauty, we use sweater materials, or those that you bought in the shop of fittings, and decorate it. Attach eyes, spout, mouth and mustache, and everything else is at your discretion. Well, our beauty and ready.
Article on the topic: Openwork tunic White Spokes
Video on the topic
And now you can view the video for the manufacture of cats in the technique of modular origami. Thanks for attention!