So that the image becomes more feminine, sometimes you just need one detail in the wardrobe to change. To do this, you can change the warm scarf to the easier and gentle. Such little things include openwork scarves with knitting needles. You can create an unforgettable image with your originality and gamma patterns.
Knitted things have long been appreciated among those who follow fashionable trends. Therefore, the openwork scarf, especially if it is made independently, it will look stylish and attractive.
Spit pattern
This scarf will be of this size: 168 cm Length and 31 width. For mating, you will need: 450 g of white threads Lana Grossa 78% wool and 12% cashmere, 10% nylon -110 m / 50 g. Knit needles at number 8.
Knitting gum: Alternate one facial, then the wrong one.
Pattern: knit based on the scheme. Numbers and letters are marked right face rows. But the invalid rows fit according to the drawing provided. In the width, they inspire all the loops, but start from a set of 53 cavetles and, taking into account the scheme in the first row, it is already necessary to add 17 loops - we get 70 kettops. To the height to check over 1-30 row, and after repeating 15 - 30 rows.
Density: 22 row, 22.5 cm - 10-10 cm.
Knit a scarf: We recruit 53 loops and knit up to 4 cm - 8 rows of viscous "rubber band", but already from the first row after the edge with the front, and in the end it is finished in front of the edge-facial. Now we knit our pattern "braids", do not forget in the first row, add 17 kettles, as was indicated in the scheme. When 179 cm - 360 row from the plank will contact, begin to subscribe in the face row, as it was in the first row with a pattern - 17 kettles - 53 Operate the looping should be in total.
Article on the topic: how to make a medallion with your own hands
After the subsequent Pointing row, I check 4 cm - 8 rows of a viscous "rubber band". Then we close the loops, but not tight. We ride three braids decorative. For the data of the braids, it is necessary to cut off three times of 8 threads, the length of which will be 360 cm, and at the end we associate the thread into the node and now weave the pigtail. The length should be 170 cm. The brain tip is tied. Each pigtail is done in 3 median braids of Sharfi, start from the wrong side from the end of the plank, gradually translate the pigtails on the front side under the resulting crossing - we look at the photo, as it should look like. The ends of the braids are sewn from the wrong side of the product.
Leaves and cishechki
The finished product will have a width of 38 cm, and the length (volume) is 94 cm. It will take: Threads Lana Grossa "Bingomelange" 100% wool 80 m / 50 g. We need to take 450 g of the selected color and spokes No. 4.5.
Description and schemes are shown below.
Pattern handling: a row is an outbreak, a series of facial - knits facial hinges.
Facial smooth: on the facial row, knit facial hinges, and on the involne-off - involnery.
Pattern with leaves: knit according to the scheme V. The numbers on the right outside the figure indicate the facial rowers, and in the wrong rows of the loops and the camps in the hinges. Starting from the first loop in the first row, we add 2 loops with Caid - it turns out 3. The same is done in 3rd and in the 5th row, as indicated in the scheme - 7 kettops. In the 9th row, we begin to derogate 1 loops from each side, as indicated in the diagram until only one looper is obtained in 13 row. We will connect in height from 1 to 14 row only 1 time.
Pattern "Blinds": We look at the scheme A. The numbers indicated on the right outside are facial rows, and in the wrong row need to be squeezed taking into account the circuit or pattern. We will connect wide before the first arrow from the edge loop, the rapport of 30 loops, between the arrows you need to constantly make a repeat, finish the edge loop after the second boom. In the height you need to check with 1-46 row once, and after 3-46 rows once.
Article on the topic: Weaving Easter eggs from newspapers
Density: 19.5 cm and 27 rows of shishchekes and leaves 10-10 cm.
Knit a scarf: We recruit 152 kettles, and for the Kaima, we feed 2.5 cm - 6 rows knitted sweating, and then 2 rows of facial stroy, but in the first row of facial stroy after 3 and 29, 5 kettops add one front crossed loop from the transverse thread The previous row - should turn out 182 loops. Further to check 6 rapports from a pattern of cones and leaves. When 33 cm contacts, knit for the final border of 2.5 cm. Facial stroke and 6 wetting boiled viscous, but in the first row, the front alternate stroy is a third or fourth, after 29 each 5 and 6 hinges are sophisticated together with facial loops - 152 loops. Next, after the last row, we close all the loops. After, we stretch the product, it's a little moistened and stretched, and we sew the narrow sides.
Many fashionable modernity loves to dilute their everyday view of various color scarves. Such openwork scarves wear not only with the coat, but also for the image, when wearing ordinary light clothes.
Needlewomen can knit a variety of beautiful patterns that are presented in various fashion magazines. But these are not limited, because there is no limit fantasy, and new beautiful, a variety of patterns - braids, bumps, spikelets, shells and others are constantly appearing.
Video on the topic
This article presents video lessons with which you can learn to knit openwork scarves with the help of the spokes.