In everyday life, low carbon alloys are used in the creation of metal structures. They are easily oxidized and destroyed from moisture. Metal paint, especially hammer, polyurethane and rubber, creates a protective film, preventing rust formation. It can have different colors, be matte, reflective and glossy. Pipe coating inside the house does not require special compositions. You can use a cheap quick-drying nitro enamel. For mangal and fireplace, heat-resistant: Surik, Silver, Bronze. Such a coating can be made with your own hands using an aerosol.
Hammer paint
Metal paints protect against corrosion
Hammer paint for metal parts
Metal paint for external work should reliably protect the surface from the effects of frost, rain, to resist the destructive effect of UV radiation and withstand the deformations of the structures. She must be:
- wear-resistant;
- anti-corrosion;
- waterproof;
- quick-drying;
- heat-resistant;
- form a durable coating;
- Durable.
It is desirable, easy to work so that you can make a fence, pipeline and mangal with your own hands. Cars can be coated using aerosol. Main types of paint for metal:
- hammer;
- polyurethane;
- rubber;
- Bronze;
- silver;
- epoxy;
- Nitro Enamel;
- Oil;
- Surik.
In some cases, additional requirements are presented. Along roads, it is better if the painting of metal structures takes into account the features of the night ride and reflective paint is used. For thermal furnaces, fireplaces, fire-resistant faces are created.
Bituminous mastic is better than other materials isolates pipe inputs and roof designs. It is used in places of joints of different systems, used as waterproofing. Bituminous mastic, as well as zinc-containing heat-resistant, nitro enamel and oil paint, contains harmful substances and apply it better only outside. Its flow rate on 1m2 depends on the number of layers. To remove it, you need preparation: degreasing and cleaning.
Article on the topic: How to update the doors with your own hands: methods of finishing the canvas
For internal works, it is better to use paint for metal without smell, having alkyd components on silicone basis. Also waterproof matte on aquatic and lacquer basis: Surik, bronze, which is at the same time heat-resistant and quick-drying. Classic oil enamel and nitrocracy is cheaper than other materials. They have a large consumption of 1m2 coverage account in several layers. After drying, the smell rests for a long time.
Hammer paint has a unique pattern of riveted surface
Paint hammer for auto parts
Hammer paint can be applied by rust. The coating is made with a roller, brush and an aerosol is used. Consumption 1 liter - norm from 6 m2, up to 10 m2 area. Powder thermal compositions were used in the antiquity. It was impossible to make such a coating. Hammer paint, powder, liquid and aerosol has the same characteristics:
- heat-resistant, retains its appearance up to 80 degrees;
- waterproof;
- Anticorrosive, applied by rust;
- wear-resistant;
- quick-drying;
- The surface is matte, reflective, textured.
Dilute powder, make liquid composition, using water-based alkyd varnishes. Clean the old film will help Nitro washing. Preparation and coating are made with their own hands. The exception is the old composition - powder mixture.
Hammer paint for finishing
Hammer paint applies:
- painting of metal structures;
- coating a fireplace, mangala;
- heating systems, doors;
- cast iron and metal housings of rust equipment;
- Plastic furniture, trim.
The coating area in M2 is not limited. Make the composition of liquid, dilute the old mixture, can be solvent, the rate is not more than 50%. Consumption per 1m2, on hammer paint and aerosol specified on the package. The norm on the powder formulations depends on the material: according to galvanized metal, cast iron or smooth plastic.
Hammer paint can be different:
- epoxy;
- styrene - alkyd;
- Acrylic polymer.
Silicons in the composition repel water. Alkid resins make it possible to apply a rust polymer coating, an anti-corrosion mixture. Decreases consumption of materials normally on m2. It is necessary to remove only loose stains of rust, used for this wash. The rest can be cleaned of dust. Standard consumption according to the instructions - 1 liter by 10 m2. Temperature 80 degrees.
Article on the topic: Toning of glasses on the loggia and balcony
Rubber paint - a variety of latex
Palette hammer paints
Rubber paint on silicone - silicate basis is named as a matte, similar to rubber, coating. It is produced in plastic packaging and aerosol. For cars is better spray. The surface from rust should be cleaned, use a liquid solvent, make degreasing, can be applied to a surr, treat Nitro primer. Application area:
- floors in the house;
- tracks and sites;
- Plastic furniture for the kitchen;
- painting of metal structures;
- Decorative design of mangal and fireplace;
- Body car.
The anti-corrosion rubber polymer mixture is also used as paint for metal tile. It is heat-resistant, withstands the temperature differences from 60 degrees of frost to 80 degrees of heat. The whole area should be treated from old rust, oil film. Then applies an aerosol rubber mixture based on silicone. The polymer coating is made with their own hands.
Matte rubber paint - spray is produced for cars reflective. She paints concrete fences and plastic railing.
For painting various vehicles of the car, a turonist and bronze paint on a water basis are used. Consisting of iron oxides Grinding Surik matte. It is heat-resistant, waterproof and quick-drying. Bronze can be reflective, golden look. The flow of these materials on the M2 is minimal. They fall a thin layer. Calculation of the number of components when mixing powder with the base, is indicated on the package.
Nitrocraska dries quickly
Hummer Paint for Metal Doors
Nitro enamel and oil paint applied to outdoor work. Painting of metal structures is carried out all over the area only in dry weather. The coating requires good training:
- degreasing;
- stripping rust;
- remove the old finish;
- Smell dust.
The surface can be matte and glossy. They are made on the basis of olifa and solvent. To get a more liquid composition, we must dissolve the solvent. The rate is not more than 20% of the old thick mixture. Consumption per m2 is large, as more than 3 layers are required.
Article on the topic: Design of the door lock: types, structure, system
Before starting work with your own hands, it is necessary to decide what to degrease the metal before painting. To remove the oil film, it is better to use a liquid solvent, dilute it with water. Washing cleans from old coating and soil each m2 area.
Polyurethane compositions for metal differ plasticity
Wide selection of hammer paint
If the question arose how to paint rusty metal, apply a coating on a galvanized surface, use polyurethane compositions. Suject is suitable as a primer. Water based dyes are easily removed. They have a special bow.
The heat-resistant paint is matte and glossy. The highest temperatures withstand black. Usually a two-component heat-resistant mixture is applied in 2 layers. One liter is consumed by 10 m2.
Bronze and Silverka lay down thin layer
Hammer paint
The heat-resistant is powder formulations on aquatic and lacquer. Two-component paint is mixed before applying. She is matte, heat-resistant, quick-drying. Suitable for galvanized metal. You can paint plastic. Special types of them withstand temperatures up to 1000 degrees. Such water-based paints are used to cover inside the fireplace, oven, mangala. Mainly:
- silver;
- Surik;
- Graphant enamel.
The lack of heat-resistant compositions withsting 1000 degrees in the palette. The heat-resistant paint on metal is mostly black, only a tuber has a brick shade.
The bronze powder mixture, golden in appearance, contains ground copper and resistant to temperatures up to 400 degrees. It can be decorated with a brazier and separate plastic, rough metal. A beautiful gold surface is obtained by spraying on an alkyd powder varnish.